[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAL_JsqK6TAqZgqWGvdA4aaEPiZeBxug4gV6mwZoUOHB1mSZzFw@mail.gmail.com>
Date: Tue, 26 Mar 2019 07:58:14 -0500
From: Rob Herring <robh+dt@...nel.org>
To: Andreas Klinger <ak@...klinger.de>
Cc: Jonathan Cameron <jic23@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald <pmeerw@...erw.net>,
"open list:IIO SUBSYSTEM AND DRIVERS" <linux-iio@...r.kernel.org>,
devicetree@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] devantech-srf04.yaml: transform DT binding to YAML
On Tue, Mar 26, 2019 at 7:31 AM Andreas Klinger <ak@...klinger.de> wrote:
>
> use devantech-srf04.txt and transform binding into yaml
I'd just collapse these into 1 patch.
>
> Signed-off-by: Andreas Klinger <ak@...klinger.de>
> ---
> .../bindings/iio/proximity/devantech-srf04.yaml | 62 ++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> new file mode 100644
> index 000000000000..cd065393b062
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/proximity/devantech-srf04.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Devantech SRF04 ultrasonic range finder
> +
> +maintainers:
> + - Andreas Klinger <ak@...klinger.de>
> +
> +description: |
> + Bit-banging driver using two GPIOs:
> + - trigger-gpio is raised by the driver to start sending out an ultrasonic
> + burst
> + - echo-gpio is held high by the sensor after sending ultrasonic burst
> + until it is received once again
> +
> + Specifications about the driver can be found at:
> + http://www.robot-electronics.co.uk/htm/srf04tech.htm
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
This doesn't belong. It's not a I2C bus controller.
> +
> +properties:
> + compatible:
> + items:
> + - const: devantech,srf04
> +
> + trig-gpios:
> + description:
> + Definition of the GPIO for the triggering (output) This GPIO is set
> + for about 10 us by the driver to tell the device it should initiate
> + the measurement cycle.
> + maxItems: 1
> +
> + echo-gpios:
> + description:
> + Definition of the GPIO for the echo (input)
> + This GPIO is set by the device as soon as an ultrasonic burst is sent
> + out and reset when the first echo is received.
> + Thus this GPIO is set while the ultrasonic waves are doing one round
> + trip.
> + It needs to be an GPIO which is able to deliver an interrupt because
> + the time between two interrupts is measured in the driver.
> + See Documentation/devicetree/bindings/gpio/gpio.txt for information
> + on how to specify a consumer gpio.
> + maxItems: 1
> +
> +required:
> + - compatible
> + - trig-gpios
> + - echo-gpios
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + proximity {
> + compatible = "devantech,srf04";
> + trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> + echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
> + };
> --
> 2.11.0
Powered by blists - more mailing lists