linux-kernel - Re: [PATCH 1/3] media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <518678c1-2e1d-ca27-55bd-0dd10965354f@xs4all.nl>
Date:   Wed, 27 Mar 2019 13:39:03 +0100
From:   Hans Verkuil <hverkuil@...all.nl>
To:     Neil Armstrong <narmstrong@...libre.com>, mchehab@...nel.org,
        devicetree@...r.kernel.org
Cc:     linux-amlogic@...ts.infradead.org, linux-media@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/3] media: dt-bindings: media: meson-ao-cec: Add G12A
 AO-CEC-B Compatible

On 3/25/19 6:34 PM, Neil Armstrong wrote:
> The Amlogic G12A embeds a second CEC controller named AO-CEC-B, and
> the other one is AO-CEC-A described by the current bindings.
> 
> The registers interface is very close but the internal architecture

registers -> register

> is totally different.
> 
> The other difference is the closk source, the AO-CEC-B takes the

closk -> clock

> "oscin", the Always-On Oscillator clock, as input and embeds a
> dual-divider clock divider to provide the precise 32768Hz base
> clock for CEC communication.
> 
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
>  .../devicetree/bindings/media/meson-ao-cec.txt    | 15 +++++++++++----
>  1 file changed, 11 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
> index 8671bdb08080..d6e2f9cf0aaf 100644
> --- a/Documentation/devicetree/bindings/media/meson-ao-cec.txt
> +++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
> @@ -4,16 +4,23 @@ The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
>  to handle communication between HDMI connected devices over the CEC bus.
>  
>  Required properties:
> -  - compatible : value should be following
> -	"amlogic,meson-gx-ao-cec"
> +  - compatible : value should be following depending on the SoC :
> +  	For GXBB, GXL, GXM and G12A (AO_CEC_A module) :
> +  	"amlogic,meson-gx-ao-cec"
> +	For G12A (AO_CEC_B module) :
> +	"amlogic,meson-g12a-ao-cec"

The driver uses "amlogic,meson-g12a-ao-cec-b", so there is a mismatch between
the bindings and the driver.

Please repost since it is important that the two correspond.

Thanks!

	Hans

>  
>    - reg : Physical base address of the IP registers and length of memory
>  	  mapped region.
>  
>    - interrupts : AO-CEC interrupt number to the CPU.
>    - clocks : from common clock binding: handle to AO-CEC clock.
> -  - clock-names : from common clock binding: must contain "core",
> -		  corresponding to entry in the clocks property.
> +  - clock-names : from common clock binding, must contain :
> +		For GXBB, GXL, GXM and G12A (AO_CEC_A module) :
> +		- "core"
> +		For G12A (AO_CEC_B module) :
> +		- "oscin"
> +		corresponding to entry in the clocks property.
>    - hdmi-phandle: phandle to the HDMI controller
>  
>  Example:
>