[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1553768318-23149-5-git-send-email-masonccyang@mxic.com.tw>
Date: Thu, 28 Mar 2019 18:18:35 +0800
From: Mason Yang <masonccyang@...c.com.tw>
To: broonie@...nel.org, marek.vasut@...il.com,
linux-kernel@...r.kernel.org, linux-spi@...r.kernel.org,
bbrezillon@...nel.org, dwmw2@...radead.org, lee.jones@...aro.org,
robh+dt@...nel.org, mark.rutland@....com,
computersforpeace@...l.com, paul.burton@...s.com, stefan@...er.ch,
christophe.kerello@...com, liang.yang@...ogic.com,
geert@...ux-m68k.org, devicetree@...r.kernel.org,
marcel.ziswiler@...adex.com, linux-mtd@...ts.infradead.org,
richard@....at, miquel.raynal@...tlin.com
Cc: juliensu@...c.com.tw, zhengxunli@...c.com.tw,
Mason Yang <masonccyang@...c.com.tw>
Subject: [PATCH 4/7] dt-bindings: mfd: Document Macronix MX25F0A controller bindings
Document the bindings used by the Macronix MX25F0A MFD controller.
Signed-off-by: Mason Yang <masonccyang@...c.com.tw>
---
.../devicetree/bindings/mfd/mxic-mx25f0a.txt | 66 ++++++++++++++++++++++
1 file changed, 66 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mxic-mx25f0a.txt
diff --git a/Documentation/devicetree/bindings/mfd/mxic-mx25f0a.txt b/Documentation/devicetree/bindings/mfd/mxic-mx25f0a.txt
new file mode 100644
index 0000000..53b4839
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mxic-mx25f0a.txt
@@ -0,0 +1,66 @@
+Macronix MX25F0A Multi-Function Device Tree Bindings
+----------------------------------------------------
+
+MX25F0A is a MultiFunction Device with SPI and raw NAND, which
+supports either spi host controller or raw nand controller.
+
+Required properties:
+- compatible: should be "mxic,mx25f0a-mfd"
+- #address-cells: should be 1
+- #size-cells: should be 0
+- reg: should contain 2 entries, one for the registers and one for the direct
+ mapping area in SPI mode.
+- reg-names: should contain "regs" and "dirmap"
+- interrupts: interrupt line connected to this MFD controller
+
+Required nodes:
+ - spi :
+ Node for configuring the SPI controller driver.
+ Required properties:
+ - compatible = "mxicy,mx25f0a-spi";
+ - clock-names: should contain "ps_clk", "send_clk" and
+ "send_dly_clk"
+ - clocks: should contain 3 entries for the "ps_clk", "send_clk"
+ and "send_dly_clk" clocks
+
+- nand :
+ Node for configuring the raw nand controller driver.
+ Required properties:
+ - compatible = "mxicy,mx25f0a-nand-ctlr";
+ - nand-ecc-mode = "soft";
+ - nand-ecc-algo = "bch";
+
+Example:
+
+ mxic: mx25f0a-mfd@...30000 {
+ compatible = "mxic,mx25f0a-mfd";
+ reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
+ reg-names = "regs", "dirmap";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* either spi or nand */
+ spi {
+ compatible = "mxicy,mx25f0a-spi";
+ clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+ clock-names = "send_clk", "send_dly_clk", "ps_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+ };
+
+ nand {
+ compatible = "mxicy,mx25f0a-nand-ctlr";
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "bch";
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <8>;
+ };
+ };
--
1.9.1
Powered by blists - more mailing lists