| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 28 Mar 2019 13:57:56 +0200
From: Jonathan Chocron <jonnyc@...zon.com>
To: linux-pci@...r.kernel.org
Cc: lorenzo.pieralisi@....com, bhelgaas@...gle.com,
linux-kernel@...r.kernel.org, vaerov@...zon.com, dwmw@...zon.co.uk,
benh@...nel.crashing.org, alisaidi@...zon.com, zeev@...zon.com,
ronenk@...zon.com, barakw@...zon.com, jonnyc@...zon.com,
talel@...zon.com, hanochu@...zon.com, hhhawa@...zon.com
Subject: [PATCH v3] PCI: al: Add Amazon Annapurna Labs PCIe host controller driver
Add support for Amazon's Annapurna Labs PCIe driver. The HW controller
is based on DesignWare's IP.
The HW doesn't support accessing the Root Port's config space via ECAM,
so we obtain its base address via an AMZN0001 device.
Furthermore, the DesignWare PCIe controller doesn't filter out config
transactions sent to devices 1 and up on its bus, so they are filtered
by the driver.
All subordinate buses do support ECAM access.
Implementing specific PCI config access functions involves:
- Adding an init function to obtain the Root Port's base address from
an AMZN0001 device.
- Adding a new entry in the MCFG quirk array
Co-developed-by: Vladimir Aerov <vaerov@...zon.com>
Signed-off-by: Jonathan Chocron <jonnyc@...zon.com>
Signed-off-by: Vladimir Aerov <vaerov@...zon.com>
Reviewed-by: David Woodhouse <dwmw@...zon.co.uk>
---
--v2:
- Fix commit message comments (incl. using AMZN0001 instead of
PNP0C02)
- Use the usual multi-line comment style
--v3:
- Fix additional commit message comments
MAINTAINERS | 6 +++
drivers/acpi/pci_mcfg.c | 12 +++++
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pcie-al.c | 93 ++++++++++++++++++++++++++++++++++++
include/linux/pci-ecam.h | 1 +
5 files changed, 113 insertions(+)
create mode 100644 drivers/pci/controller/dwc/pcie-al.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 32d444476a90..7a17017f9f82 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11769,6 +11769,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/
S: Supported
F: drivers/pci/controller/
+PCIE DRIVER FOR ANNAPURNA LABS
+M: Jonathan Chocron <jonnyc@...zon.com>
+L: linux-pci@...r.kernel.org
+S: Maintained
+F: drivers/pci/controller/dwc/pcie-al.c
+
PCIE DRIVER FOR AMLOGIC MESON
M: Yue Wang <yue.wang@...ogic.com>
L: linux-pci@...r.kernel.org
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index a4e8432fc2fb..b42be067fb83 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -52,6 +52,18 @@ struct mcfg_fixup {
static struct mcfg_fixup mcfg_quirks[] = {
/* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */
+#define AL_ECAM(table_id, rev, seg, ops) \
+ { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops }
+
+ AL_ECAM("GRAVITON", 0, 0, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 1, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 2, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 3, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 4, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 5, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 6, &al_pcie_ops),
+ AL_ECAM("GRAVITON", 0, 7, &al_pcie_ops),
+
#define QCOM_ECAM32(seg) \
{ "QCOM ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops }
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 7bcdcdf5024e..1ea773c0070d 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -28,5 +28,6 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
# depending on whether ACPI, the DT driver, or both are enabled.
ifdef CONFIG_PCI
+obj-$(CONFIG_ARM64) += pcie-al.o
obj-$(CONFIG_ARM64) += pcie-hisi.o
endif
diff --git a/drivers/pci/controller/dwc/pcie-al.c b/drivers/pci/controller/dwc/pcie-al.c
new file mode 100644
index 000000000000..65a9776c12be
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-al.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Amazon's Annapurna Labs IP (used in chips
+ * such as Graviton and Alpine)
+ *
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Author: Jonathan Chocron <jonnyc@...zon.com>
+ */
+
+#include <linux/pci.h>
+#include <linux/pci-ecam.h>
+#include <linux/pci-acpi.h>
+#include "../../pci.h"
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+
+struct al_pcie_acpi {
+ void __iomem *dbi_base;
+};
+
+static void __iomem *al_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct al_pcie_acpi *pcie = cfg->priv;
+ void __iomem *dbi_base = pcie->dbi_base;
+
+ if (bus->number == cfg->busr.start) {
+ /*
+ * The DW PCIe core doesn't filter out transactions to other
+ * devices/functions on the primary bus num, so we do this here.
+ */
+ if (PCI_SLOT(devfn) > 0)
+ return NULL;
+ else
+ return dbi_base + where;
+ }
+
+ return pci_ecam_map_bus(bus, devfn, where);
+}
+
+static int al_pcie_init(struct pci_config_window *cfg)
+{
+ struct device *dev = cfg->parent;
+ struct acpi_device *adev = to_acpi_device(dev);
+ struct acpi_pci_root *root = acpi_driver_data(adev);
+ struct al_pcie_acpi *al_pcie;
+ struct resource *res;
+ int ret;
+
+ al_pcie = devm_kzalloc(dev, sizeof(*al_pcie), GFP_KERNEL);
+ if (!al_pcie)
+ return -ENOMEM;
+
+ res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+ if (!res)
+ return -ENOMEM;
+
+ ret = acpi_get_rc_resources(dev, "AMZN0001", root->segment, res);
+ if (ret) {
+ dev_err(dev, "can't get rc dbi base address for SEG %d\n",
+ root->segment);
+ return ret;
+ }
+
+ dev_dbg(dev, "Root port dbi res: %pR\n", res);
+
+ al_pcie->dbi_base = devm_pci_remap_cfg_resource(dev, res);
+ if (IS_ERR(al_pcie->dbi_base)) {
+ long err = PTR_ERR(al_pcie->dbi_base);
+
+ dev_err(dev, "couldn't remap dbi base %pR (err:%ld)\n",
+ res, err);
+ return err;
+ }
+
+ cfg->priv = al_pcie;
+
+ return 0;
+}
+
+struct pci_ecam_ops al_pcie_ops = {
+ .bus_shift = 20,
+ .init = al_pcie_init,
+ .pci_ops = {
+ .map_bus = al_pcie_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+ }
+};
+
+#endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 29efa09d686b..a73164c85e78 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -56,6 +56,7 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */
extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
+extern struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */
#endif
#ifdef CONFIG_PCI_HOST_COMMON
--
1.9.1
Powered by blists - more mailing lists