| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHQ1cqHiz__CXFZKG_6GanDxNTMzdhTLc_f9Xa-pc8Tb5GyRuw@mail.gmail.com>
Date: Thu, 28 Mar 2019 22:30:36 -0700
From: Andrey Smirnov <andrew.smirnov@...il.com>
To: Shawn Guo <shawnguo@...nel.org>
Cc: Chris Healy <cphealy@...il.com>, Andrew Lunn <andrew@...n.ch>,
Fabio Estevam <festevam@...il.com>,
Rob Herring <robh@...nel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>
Subject: Re: [PATCH 2/2] ARM: dts: Add support for ZII i.MX7 RPU2 board
On Tue, Mar 26, 2019 at 11:41 PM Andrey Smirnov
<andrew.smirnov@...il.com> wrote:
>
> Add support for ZII's i.MX7 based Remote Peripheral Unit 2 (RPU2)
> board.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
> Cc: Shawn Guo <shawnguo@...nel.org>
> Cc: Chris Healy <cphealy@...il.com>
> Cc: Andrew Lunn <andrew@...n.ch>
> Cc: Fabio Estevam <festevam@...il.com>
> Cc: Rob Herring <robh@...nel.org>
> Cc: linux-kernel@...r.kernel.org
> Cc: devicetree@...r.kernel.org
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx7d-zii-rpu2.dts | 936 +++++++++++++++++++++++++++
> 2 files changed, 937 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx7d-zii-rpu2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index efefce8efa05..687222907154 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -586,6 +586,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
> imx7d-sdb.dtb \
> imx7d-sdb-reva.dtb \
> imx7d-sdb-sht11.dtb \
> + imx7d-zii-rpu2.dtb \
> imx7s-colibri-eval-v3.dtb \
> imx7s-warp.dtb
> dtb-$(CONFIG_SOC_IMX7ULP) += \
> diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
> new file mode 100644
> index 000000000000..6f36c7d9d214
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
> @@ -0,0 +1,936 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +
> +/*
> + * Device tree file for ZII's RPU2 board
> + *
> + * RPU - Remote Peripheral Unit
> + *
> + * Copyright (C) 2019 Zodiac Inflight Innovations
> + */
> +
> +/dts-v1/;
> +#include "imx7d.dtsi"
> +
> +/ {
> + model = "ZII RPU2 Board";
> + compatible = "zii,imx7d-rpu2", "fsl,imx7d";
> +
> + chosen {
> + stdout-path = &uart1;
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&pinctrl_leds_debug>;
> + pinctrl-names = "default";
> +
> + debug {
> + label = "zii:green:debug1";
> + gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + reg_can1_stby: regulator-can1-stby {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1_stby>;
> + regulator-name = "can1-3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_can2_stby: regulator-can2-stby {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan2_stby>;
> + regulator-name = "can2-3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_vref_1v8: regulator-vref-1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "vref-1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + reg_3p3v: regulator-3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "GEN_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + reg_5p0v_main: regulator-5p0v-main {
> + compatible = "regulator-fixed";
> + regulator-name = "5V_MAIN";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + sound1 {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "Audio Output 1";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&sound1_codec>;
> + simple-audio-card,frame-master = <&sound1_codec>;
> + simple-audio-card,widgets =
> + "Headphone", "Headphone Jack";
> + simple-audio-card,routing =
> + "Headphone Jack", "HPLEFT",
> + "Headphone Jack", "HPRIGHT",
> + "LEFTIN", "HPL",
> + "RIGHTIN", "HPR";
> + simple-audio-card,aux-devs = <&hpa1>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai1>;
> + };
> +
> + sound1_codec: simple-audio-card,codec {
> + sound-dai = <&codec1>;
> + clocks = <&cs2000>;
> + };
> + };
> +
> + sound2 {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "Audio Output 2";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&sound2_codec>;
> + simple-audio-card,frame-master = <&sound2_codec>;
> + simple-audio-card,widgets =
> + "Headphone", "Headphone Jack";
> + simple-audio-card,routing =
> + "Headphone Jack", "HPLEFT",
> + "Headphone Jack", "HPRIGHT",
> + "LEFTIN", "HPL",
> + "RIGHTIN", "HPR";
> + simple-audio-card,aux-devs = <&hpa2>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai2>;
> + };
> +
> + sound2_codec: simple-audio-card,codec {
> + sound-dai = <&codec2>;
> + clocks = <&cs2000>;
> + };
> + };
> +
> + sound3 {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "Audio Output 3";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&sound3_codec>;
> + simple-audio-card,frame-master = <&sound3_codec>;
> + simple-audio-card,widgets =
> + "Headphone", "Headphone Jack";
> + simple-audio-card,routing =
> + "Headphone Jack", "HPLEFT",
> + "Headphone Jack", "HPRIGHT",
> + "LEFTIN", "HPL",
> + "RIGHTIN", "HPR";
> + simple-audio-card,aux-devs = <&hpa3>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai3>;
> + };
> +
> + sound3_codec: simple-audio-card,codec {
> + sound-dai = <&codec3>;
> + clocks = <&cs2000>;
> + };
> + };
> +
> + cs2000_ref: cs2000-ref {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24576000>;
> + };
> +
> + cs2000_in_dummy: cs2000-in-dummy {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> +};
> +
> +&adc1 {
> + vref-supply = <®_vref_1v8>;
> + status = "okay";
> +};
> +
> +&adc2 {
> + vref-supply = <®_vref_1v8>;
> + status = "okay";
> +};
Tested this patch more and realized that these two above need to be
properly exposed via HWMON. Will submit an update v2 of this set.
Thanks,
Andrey Smirnov
Powered by blists - more mailing lists