lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190329140014.8126-11-laurentiu.tudor@nxp.com>
Date:   Fri, 29 Mar 2019 16:00:11 +0200
From:   laurentiu.tudor@....com
To:     netdev@...r.kernel.org, madalin.bucur@....com, roy.pledge@....com,
        camelia.groza@....com, leoyang.li@....com
Cc:     davem@...emloft.net, iommu@...ts.linux-foundation.org,
        linux-arm-kernel@...ts.infradead.org,
        linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
        Laurentiu Tudor <laurentiu.tudor@....com>
Subject: [PATCH 10/13] dpaa_eth: base dma mappings on the fman rx port

From: Laurentiu Tudor <laurentiu.tudor@....com>

The dma transactions initiator is the rx fman port so that's the device
that the dma mappings should be done. Previously the mappings were done
through the MAC device which makes no sense because it's neither dma-able
nor connected in any way to smmu.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@....com>
Acked-by: Madalin Bucur <madalin.bucur@....com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 647e90e7434f..cdc7e6d83f77 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2805,8 +2805,15 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	mac_dev = dpaa_mac_dev_get(pdev);
+	if (IS_ERR(mac_dev)) {
+		dev_err(&pdev->dev, "dpaa_mac_dev_get() failed\n");
+		err = PTR_ERR(mac_dev);
+		goto probe_err;
+	}
+
 	/* device used for DMA mapping */
-	dev = pdev->dev.parent;
+	dev = fman_port_get_device(mac_dev->port[RX]);
 	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
 	if (err) {
 		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
@@ -2831,13 +2838,6 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 
 	priv->msg_enable = netif_msg_init(debug, DPAA_MSG_DEFAULT);
 
-	mac_dev = dpaa_mac_dev_get(pdev);
-	if (IS_ERR(mac_dev)) {
-		dev_err(dev, "dpaa_mac_dev_get() failed\n");
-		err = PTR_ERR(mac_dev);
-		goto free_netdev;
-	}
-
 	/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
 	 * we choose conservatively and let the user explicitly set a higher
 	 * MTU via ifconfig. Otherwise, the user may end up with different MTUs
@@ -2973,9 +2973,9 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	qman_release_cgrid(priv->cgr_data.cgr.cgrid);
 free_dpaa_bps:
 	dpaa_bps_free(priv);
-free_netdev:
 	dev_set_drvdata(dev, NULL);
 	free_netdev(net_dev);
+probe_err:
 
 	return err;
 }
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ