| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5ca06149.1c69fb81.720fd.79e1@mx.google.com>
Date: Sun, 31 Mar 2019 01:42:16 -0500
From: Rob Herring <robh@...nel.org>
To: Vidya Sagar <vidyas@...dia.com>
Cc: bhelgaas@...gle.com, mark.rutland@....com,
thierry.reding@...il.com, jonathanh@...dia.com, kishon@...com,
catalin.marinas@....com, will.deacon@....com,
lorenzo.pieralisi@....com, jingoohan1@...il.com,
gustavo.pimentel@...opsys.com, mperttunen@...dia.com,
tiwai@...e.de, spujar@...dia.com, skomatineni@...dia.com,
liviu.dudau@....com, krzk@...nel.org, heiko@...ech.de,
horms+renesas@...ge.net.au, olof@...om.net,
maxime.ripard@...tlin.com, andy.gross@...aro.org,
bjorn.andersson@...aro.org, jagan@...rulasolutions.com,
enric.balletbo@...labora.com, ezequiel@...labora.com,
stefan.wahren@...e.com, marc.w.gonzalez@...e.fr,
l.stach@...gutronix.de, tpiepho@...inj.com,
hayashi.kunihiko@...ionext.com, yue.wang@...ogic.com,
shawn.lin@...k-chips.com, xiaowei.bao@....com,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, kthota@...dia.com,
mmaddireddy@...dia.com
Subject: Re: [PATCH 05/10] dt-bindings: PCI: tegra: Add device tree support
for T194
On Tue, Mar 26, 2019 at 08:43:22PM +0530, Vidya Sagar wrote:
> Add support for Tegra194 PCIe controllers. These controllers are based
> on Synopsys DesignWare core IP.
>
> Signed-off-by: Vidya Sagar <vidyas@...dia.com>
> ---
> .../bindings/pci/nvidia,tegra194-pcie.txt | 209 +++++++++++++++++++++
> .../devicetree/bindings/phy/phy-tegra194-p2u.txt | 34 ++++
> 2 files changed, 243 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
>
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> new file mode 100644
> index 000000000000..31527283a0cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> @@ -0,0 +1,209 @@
> +NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
> +
> +This PCIe host controller is based on the Synopsis Designware PCIe IP
> +and thus inherits all the common properties defined in designware-pcie.txt.
> +
> +Required properties:
> +- compatible: For Tegra19x, must contain "nvidia,tegra194-pcie".
> +- device_type: Must be "pci"
> +- reg: A list of physical base address and length for each set of controller
> + registers. Must contain an entry for each entry in the reg-names property.
> +- reg-names: Must include the following entries:
> + "appl": Controller's application logic registers
> + "window1": This is the aperture of controller available under 4GB boundary
> + (i.e. within 32-bit space). This aperture is typically used for
> + accessing config space of root port itself and also the connected
> + endpoints (by appropriately programming internal Address
> + Translation Unit's (iATU) out bound region) and also to map
> + prefetchable/non-prefetchable BARs.
This is usually represented in 'ranges' for BARs.
> + "config": As per the definition in designware-pcie.txt
> + "atu_dma": iATU and DMA register. This is where the iATU (internal Address
> + Translation Unit) registers of the PCIe core are made available
> + fow SW access.
> + "dbi": The aperture where root port's own configuration registers are
> + available
> + "window2": This is the larger (compared to window1) aperture available above
> + 4GB boundary (i.e. in 64-bit space). This is typically used for
> + mapping prefetchable/non-prefetchable BARs of endpoints
> +- interrupts: A list of interrupt outputs of the controller. Must contain an
> + entry for each entry in the interrupt-names property.
> +- interrupt-names: Must include the following entries:
> + "intr": The Tegra interrupt that is asserted for controller interrupts
> + "msi": The Tegra interrupt that is asserted when an MSI is received
> +- bus-range: Range of bus numbers associated with this controller
> +- #address-cells: Address representation for root ports (must be 3)
> + - cell 0 specifies the bus and device numbers of the root port:
> + [23:16]: bus number
> + [15:11]: device number
> + - cell 1 denotes the upper 32 address bits and should be 0
> + - cell 2 contains the lower 32 address bits and is used to translate to the
> + CPU address space
> +- #size-cells: Size representation for root ports (must be 2)
> +- ranges: Describes the translation of addresses for root ports and standard
> + PCI regions. The entries must be 7 cells each, where the first three cells
> + correspond to the address as described for the #address-cells property
> + above, the fourth and fifth cells are for the physical CPU address to
> + translate to and the sixth and seventh cells are as described for the
> + #size-cells property above.
> + - Entries setup the mapping for the standard I/O, memory and
> + prefetchable PCI regions. The first cell determines the type of region
> + that is setup:
> + - 0x81000000: I/O memory region
> + - 0x82000000: non-prefetchable memory region
> + - 0xc2000000: prefetchable memory region
> + Please refer to the standard PCI bus binding document for a more detailed
> + explanation.
> +- #interrupt-cells: Size representation for interrupts (must be 1)
> +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
> + Please refer to the standard PCI bus binding document for a more detailed
> + explanation.
> +- clocks: Must contain an entry for each entry in clock-names.
> + See ../clocks/clock-bindings.txt for details.
> +- clock-names: Must include the following entries:
> + - core_clk
> +- resets: Must contain an entry for each entry in reset-names.
> + See ../reset/reset.txt for details.
> +- reset-names: Must include the following entries:
> + - core_apb_rst
> + - core_rst
> +- phys: Must contain a phandle to P2U PHY for each entry in phy-names.
> +- phy-names: Must include an entry for each active lane.
> + "pcie-p2u-N": where N ranges from 0 to one less than the total number of lanes
> +- Controller dependent register offsets
> + - nvidia,event-cntr-ctrl: EVENT_COUNTER_CONTROL reg offset
> + 0x168 - FPGA
> + 0x1a8 - C1, C2 and C3
> + 0x1c4 - C4
> + 0x1d8 - C0 and C5
> + - nvidia,event-cntr-data: EVENT_COUNTER_DATA reg offset
> + 0x16c - FPGA
> + 0x1ac - C1, C2 and C3
> + 0x1c8 - C4
> + 0x1dc - C0 and C5
> +- nvidia,controller-id : Controller specific ID
> + 0x0 - C0
> + 0x1 - C1
> + 0x2 - C2
> + 0x3 - C3
> + 0x4 - C4
> + 0x5 - C5
> +- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
> +
> +Optional properties:
> +- nvidia,max-speed: limits controllers max speed to this value.
> + 1 - Gen-1 (2.5 GT/s)
> + 2 - Gen-2 (5 GT/s)
> + 3 - Gen-3 (8 GT/s)
> + 4 - Gen-4 (16 GT/s)
> +- nvidia,init-speed: limits controllers init speed to this value.
> + 1 - Gen-1 (2. 5 GT/s)
> + 2 - Gen-2 (5 GT/s)
> + 3 - Gen-3 (8 GT/s)
> + 4 - Gen-4 (16 GT/s)
Don't we have standard speed properties?
Why do we need 2 values?
> +- nvidia,disable-aspm-states : controls advertisement of ASPM states
> + bit-0 to '1' : disables advertisement of ASPM-L0s
> + bit-1 to '1' : disables advertisement of ASPM-L1. This also disables
> + advertisement of ASPM-L1.1 and ASPM-L1.2
> + bit-2 to '1' : disables advertisement of ASPM-L1.1
> + bit-3 to '1' : disables advertisement of ASPM-L1.2
Seems like these too should be common.
> +- nvidia,disable-clock-request : gives a hint to driver that there is no
> + CLKREQ signal routing on board
> +- nvidia,update-fc-fixup : needs it to improve perf when a platform is designed
> + in such a way that it satisfies at least one of the following conditions
> + 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
> + 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
What is Cx?
> + a) speed is Gen-2 and MPS is 256B
> + b) speed is >= Gen-3 with any MPS
> +- nvidia,cdm-check : Enables CDM checking. For more information, refer Synopsis
> + DesignWare Cores PCI Express Controller Databook r4.90a Chapter S.4
> +- nvidia,enable-power-down : Enables power down of respective controller and
> + corresponding PLLs if they are not shared by any other entity
> +- "nvidia,pex-wake" : Add PEX_WAKE gpio number to provide wake support.
> +- "nvidia,plat-gpios" : Add gpio number that needs to be configured before
> + system goes for enumeration. There could be platforms where enabling 3.3V and
> + 12V power supplies are done through GPIOs, in which case, list of all such
> + GPIOs can be specified through this property.
These should be split out to their specific function.
> +- "nvidia,aspm-cmrt" : Common Mode Restore time for proper operation of ASPM to
> + be specified in microseconds
> +- "nvidia,aspm-pwr-on-t" : Power On time for proper operation of ASPM to be
> + specified in microseconds
> +- "nvidia,aspm-l0s-entrance-latency" : ASPM L0s entrance latency to be specified
> + in microseconds
properties with units need unit suffixes as defined in
property-units.txt.
> +
> +Examples:
> +=========
> +
> +Tegra194:
> +--------
> +
> +SoC DTSI:
> +
> + pcie@...80000 {
> + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
> + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
> + reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */
> + 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */
> + 0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K) */
> + reg-names = "appl", "config", "atu_dma";
> +
> + status = "disabled";
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + num-lanes = <8>;
> + linux,pci-domain = <0>;
> +
> + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
> + clock-names = "core_clk";
> +
> + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
> + <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
> + reset-names = "core_apb_rst", "core_rst";
> +
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
> + interrupt-names = "intr", "msi";
> +
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &gic 0 72 0x04>;
> +
> + nvidia,bpmp = <&bpmp>;
> +
> + nvidia,max-speed = <4>;
> + nvidia,disable-aspm-states = <0xf>;
> + nvidia,controller-id = <&bpmp 0x0>;
> + nvidia,aux-clk-freq = <0x13>;
> + nvidia,preset-init = <0x5>;
> + nvidia,aspm-cmrt = <0x3C>;
> + nvidia,aspm-pwr-on-t = <0x14>;
> + nvidia,aspm-l0s-entrance-latency = <0x3>;
> +
> + bus-range = <0x0 0xff>;
> + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */
> + 0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01E00000 /* non-prefetchable memory (30MB) */
> + 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory (16GB) */
> +
> + nvidia,cfg-link-cap-l1sub = <0x1c4>;
> + nvidia,cap-pl16g-status = <0x174>;
> + nvidia,cap-pl16g-cap-off = <0x188>;
> + nvidia,event-cntr-ctrl = <0x1d8>;
> + nvidia,event-cntr-data = <0x1dc>;
> + nvidia,dl-feature-cap = <0x30c>;
> + };
> +
> +Board DTS:
> +
> + pcie@...80000 {
> + status = "okay";
> +
> + vddio-pex-ctl-supply = <&vdd_1v8ao>;
> +
> + phys = <&p2u_2>,
> + <&p2u_3>,
> + <&p2u_4>,
> + <&p2u_5>;
> + phy-names = "pcie-p2u-0", "pcie-p2u-1", "pcie-p2u-2",
> + "pcie-p2u-3";
> + };
> diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
> new file mode 100644
> index 000000000000..cc0de8e8e8db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
> @@ -0,0 +1,34 @@
> +NVIDIA Tegra194 P2U binding
> +
> +Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High
> +Speed) each interfacing with 12 and 8 P2U instances respectively.
> +A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE
> +interface and PHY of HSIO/NVHS bricks. Each P2U instance represents one PCIe
> +lane.
> +
> +Required properties:
> +- compatible: For Tegra19x, must contain "nvidia,tegra194-phy-p2u".
> +- reg: Should be the physical address space and length of respective each P2U
> + instance.
> +- reg-names: Must include the entry "base".
> +
> +Required properties for PHY port node:
> +- #phy-cells: Defined by generic PHY bindings. Must be 0.
> +
> +Refer to phy/phy-bindings.txt for the generic PHY binding properties.
> +
> +Example:
> +
> +hsio-p2u {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + p2u_0: p2u@...10000 {
> + compatible = "nvidia,tegra194-phy-p2u";
> + reg = <0x0 0x03e10000 0x0 0x00010000>;
> + reg-names = "base";
> +
> + #phy-cells = <0>;
> + };
> +}
> --
> 2.7.4
>
Powered by blists - more mailing lists