[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <BYAPR12MB339845B4C5A37468841E256AC2550@BYAPR12MB3398.namprd12.prod.outlook.com>
Date: Mon, 1 Apr 2019 17:42:58 +0000
From: Sowjanya Komatineni <skomatineni@...dia.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: Adrian Hunter <adrian.hunter@...el.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Harjani Ritesh <riteshh@...eaurora.org>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Aniruddha Tvs Rao <anrao@...dia.com>,
linux-tegra <linux-tegra@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>
Subject: RE: [PATCH V3 05/10] arm64: tegra: fix default tap and trim values
> > >
> > > Default tap and trim values are incorrect for Tegra186 SDMMC4.
> > > This patch fixes it.
> > >
> > > Tested-by: Jon Hunter <jonathanh@...dia.com>
> > > Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
> >
> > Is this a fix and/or for stable?
> >
> > In either case, I am leaving this for arm-soc.
> >
> > Kind regards
> > Uffe
> >
>
> Thanks Uffe. Yes this is applicable for stable.
I don’t see any confirmation of this being applied by arm-soc.
So thought to re-check if this is applied?
> > > ---
> > > arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > > b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > > index 97aeb946ed5e..472f55fe9488 100644
> > > --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > > +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> > > @@ -317,8 +317,8 @@
> > > nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
> > > nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
> > > nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
> > > - nvidia,default-tap = <0x5>;
> > > - nvidia,default-trim = <0x9>;
> > > + nvidia,default-tap = <0x9>;
> > > + nvidia,default-trim = <0x5>;
> > > nvidia,dqs-trim = <63>;
> > > mmc-hs400-1_8v;
> > > status = "disabled";
> > > --
> > > 2.7.4
> > >
Powered by blists - more mailing lists