[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <VI1PR10MB2352F3C08CADD6029FF77FF3FE550@VI1PR10MB2352.EURPRD10.PROD.OUTLOOK.COM>
Date: Mon, 1 Apr 2019 08:38:28 +0000
From: Steve Twiss <stwiss.opensource@...semi.com>
To: Fabio Estevam <festevam@...il.com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>
CC: PENGUTRONIX <kernel@...gutronix.de>, IMXNXP <linux-imx@....com>,
"smoch@....de" <smoch@....de>, ARMLINUX <linux@...linux.org.uk>,
"andrew@...n.ch" <andrew@...n.ch>,
LINUX-ARM-KERNEL <linux-arm-kernel@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>,
Support Opensource <Support.Opensource@...semi.com>,
Adam Thomson <Adam.Thomson.Opensource@...semi.com>
Subject: RE: [RFC] ARM: dts: imx: Fix the AR803X phy-mode
Hi Fabio,
On 30 March 2019 15:51 Fabio Estevam, wrote:
> Subject: [RFC] ARM: dts: imx: Fix the AR803X phy-mode
>
> Commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode")
> exposed an issue on imx DTS files using AR8031/AR8035 PHYs.
>
> The end result is that the boards can no longer obtain an IP address
> via UDHCP, for example.
[...]
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +-
[...]
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index a0705066ccba..185fb17a3500 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -202,7 +202,7 @@
> &fec {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_enet>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-id";
> phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> status = "okay";
> };
[...]
This patch looks surprisingly similar to this one ;)
https://lore.kernel.org/patchwork/patch/1052588/
Link: https://lkml.kernel.org/r/1397569821-5530-4-git-send-email-thomas.petazzoni@free-electrons.com
Tested-by: Steve Twiss <stwiss.opensource@...semi.com>
Tested-by: Adam Thomson <Adam.Thomson@...semi.com>
Signed-off-by: Steve Twiss <stwiss.opensource@...semi.com>
Regards,
Steve
Powered by blists - more mailing lists