| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7593ea79-6810-b178-8c28-02c2427d73c5@baylibre.com>
Date: Mon, 1 Apr 2019 13:59:13 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: hverkuil@...all.nl, mchehab@...nel.org
Cc: linux-amlogic@...ts.infradead.org, linux-media@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/3] media: platform: meson: Add Amlogic Meson G12A AO
CEC Controller driver
On 01/04/2019 10:19, Neil Armstrong wrote:
> The Amlogic G12A SoC embeds a second CEC controller with a totally
> different design.
>
> The two controller can work in the same time since the CEC line can
> be set to two different pins on the two controllers.
>
> This second CEC controller is documented as "AO-CEC-B", thus the
> registers will be named "CECB_" to differentiate with the other
> AO-CEC driver.
>
> Unlike the other AO-CEC controller, this one takes the Oscillator
> clock as input and embeds a dual-divider to provide a precise
> 32768Hz clock for communication. This is handled by registering
> a clock in the driver.
>
> Unlike the other AO-CEC controller, this controller supports setting
> up to 15 logical addresses and supports the signal_free_time settings
> in the transmit function.
>
> Unfortunately, this controller does not support "monitor" mode.
>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
> drivers/media/platform/Kconfig | 13 +
> drivers/media/platform/meson/Makefile | 1 +
> drivers/media/platform/meson/ao-cec-g12a.c | 788 +++++++++++++++++++++
> 3 files changed, 802 insertions(+)
> create mode 100644 drivers/media/platform/meson/ao-cec-g12a.c
>
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index 4acbed189644..92ea07ddc609 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -578,6 +578,19 @@ config VIDEO_MESON_AO_CEC
> generic CEC framework interface.
> CEC bus is present in the HDMI connector and enables communication
>
> +config VIDEO_MESON_G12A_AO_CEC
> + tristate "Amlogic Meson G12A AO CEC driver"
> + depends on ARCH_MESON || COMPILE_TEST
> + select CEC_CORE
> + select CEC_NOTIFIER
> + ---help---
> + This is a driver for Amlogic Meson G12A SoCs AO CEC interface.
> + This driver if for the new AO-CEC module found in G12A SoCs,
> + usually named AO_CEC_B in documentation.
> + It uses the generic CEC framework interface.
> + CEC bus is present in the HDMI connector and enables communication
> + between compatible devices.
> +
> config CEC_GPIO
> tristate "Generic GPIO-based CEC driver"
> depends on PREEMPT || COMPILE_TEST
> diff --git a/drivers/media/platform/meson/Makefile b/drivers/media/platform/meson/Makefile
> index 597beb8f34d1..f611c23c3718 100644
> --- a/drivers/media/platform/meson/Makefile
> +++ b/drivers/media/platform/meson/Makefile
> @@ -1 +1,2 @@
> obj-$(CONFIG_VIDEO_MESON_AO_CEC) += ao-cec.o
> +obj-$(CONFIG_VIDEO_MESON_G12A_AO_CEC) += ao-cec-g12a.o
> diff --git a/drivers/media/platform/meson/ao-cec-g12a.c b/drivers/media/platform/meson/ao-cec-g12a.c
> new file mode 100644
> index 000000000000..db6886771e58
> --- /dev/null
> +++ b/drivers/media/platform/meson/ao-cec-g12a.c
> @@ -0,0 +1,788 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Amlogic Meson AO CEC G12A Controller
> + *
> + * Copyright (C) 2017 Amlogic, Inc. All rights reserved
> + * Copyright (C) 2019 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@...libre.com>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +#include <linux/regmap.h>
> +#include <media/cec.h>
> +#include <media/cec-notifier.h>
> +#include <linux/clk-provider.h>
> +
> +/* CEC Registers */
> +
> +#define CECB_CLK_CNTL_REG0 0x00
> +
> +#define CECB_CLK_CNTL_N1 GENMASK(11, 0)
> +#define CECB_CLK_CNTL_N2 GENMASK(23, 12)
> +#define CECB_CLK_CNTL_DUAL_EN BIT(28)
> +#define CECB_CLK_CNTL_OUTPUT_EN BIT(30)
> +#define CECB_CLK_CNTL_INPUT_EN BIT(31)
> +
> +#define CECB_CLK_CNTL_REG1 0x04
> +
> +#define CECB_CLK_CNTL_M1 GENMASK(11, 0)
> +#define CECB_CLK_CNTL_M2 GENMASK(23, 12)
> +#define CECB_CLK_CNTL_BYPASS_EN BIT(24)
> +
> +/*
> + * [14:12] Filter_del. For glitch-filtering CEC line, ignore signal
> + * change pulse width < filter_del * T(filter_tick) * 3.
> + * [9:8] Filter_tick_sel: Select which periodical pulse for
> + * glitch-filtering CEC line signal.
> + * - 0=Use T(xtal)*3 = 125ns;
> + * - 1=Use once-per-1us pulse;
> + * - 2=Use once-per-10us pulse;
> + * - 3=Use once-per-100us pulse.
> + * [3] Sysclk_en. 0=Disable system clock; 1=Enable system clock.
> + * [2:1] cntl_clk
> + * - 0 = Disable clk (Power-off mode)
> + * - 1 = Enable gated clock (Normal mode)
> + * - 2 = Enable free-run clk (Debug mode)
> + * [0] SW_RESET 1=Apply reset; 0=No reset.
> + */
> +#define CECB_GEN_CNTL_REG 0x08
> +
> +#define CECB_GEN_CNTL_RESET BIT(0)
> +#define CECB_GEN_CNTL_CLK_DISABLE 0
> +#define CECB_GEN_CNTL_CLK_ENABLE 1
> +#define CECB_GEN_CNTL_CLK_ENABLE_DBG 2
> +#define CECB_GEN_CNTL_CLK_CTRL_MASK GENMASK(2, 1)
> +#define CECB_GEN_CNTL_SYS_CLK_EN BIT(3)
> +#define CECB_GEN_CNTL_FILTER_TICK_125NS 0
> +#define CECB_GEN_CNTL_FILTER_TICK_1US 1
> +#define CECB_GEN_CNTL_FILTER_TICK_10US 2
> +#define CECB_GEN_CNTL_FILTER_TICK_100US 3
> +#define CECB_GEN_CNTL_FILTER_TICK_SEL GENMASK(9, 8)
> +#define CECB_GEN_CNTL_FILTER_DEL GENMASK(14, 12)
> +
> +/*
> + * [7:0] cec_reg_addr
> + * [15:8] cec_reg_wrdata
> + * [16] cec_reg_wr
> + * - 0 = Read
> + * - 1 = Write
> + * [31:24] cec_reg_rddata
> + */
> +#define CECB_RW_REG 0x0c
> +
> +#define CECB_RW_ADDR GENMASK(7, 0)
> +#define CECB_RW_WR_DATA GENMASK(15, 8)
> +#define CECB_RW_WRITE_EN BIT(16)
> +#define CECB_RW_BUS_BUSY BIT(23)
> +#define CECB_RW_RD_DATA GENMASK(31, 24)
> +
> +/*
> + * [0] DONE Interrupt
> + * [1] End Of Message Interrupt
> + * [2] Not Acknowlegde Interrupt
> + * [3] Arbitration Loss Interrupt
> + * [4] Initiator Error Interrupt
> + * [5] Follower Error Interrupt
> + * [6] Wake-Up Interrupt
> + */
> +#define CECB_INTR_MASKN_REG 0x10
> +#define CECB_INTR_CLR_REG 0x14
> +#define CECB_INTR_STAT_REG 0x18
> +
> +#define CECB_INTR_DONE BIT(0)
> +#define CECB_INTR_EOM BIT(1)
> +#define CECB_INTR_NACK BIT(2)
> +#define CECB_INTR_ARB_LOSS BIT(3)
> +#define CECB_INTR_INITIATOR_ERR BIT(4)
> +#define CECB_INTR_FOLLOWER_ERR BIT(5)
> +#define CECB_INTR_WAKE_UP BIT(6)
> +
> +/* CEC Commands */
> +
> +#define CECB_CTRL 0x00
> +
> +#define CECB_CTRL_SEND BIT(0)
> +#define CECB_CTRL_TYPE GENMASK(2, 1)
> +#define CECB_CTRL_TYPE_RETRY 0
> +#define CECB_CTRL_TYPE_NEW 1
> +#define CECB_CTRL_TYPE_NEXT 2
> +
> +#define CECB_CTRL2 0x01
> +#define CECB_INTR_MASK 0x02
> +#define CECB_LADD_LOW 0x05
> +#define CECB_LADD_HIGH 0x06
> +#define CECB_TX_CNT 0x07
> +#define CECB_RX_CNT 0x08
> +#define CECB_STAT0 0x09
> +#define CECB_TX_DATA00 0x10
> +#define CECB_TX_DATA01 0x11
> +#define CECB_TX_DATA02 0x12
> +#define CECB_TX_DATA03 0x13
> +#define CECB_TX_DATA04 0x14
> +#define CECB_TX_DATA05 0x15
> +#define CECB_TX_DATA06 0x16
> +#define CECB_TX_DATA07 0x17
> +#define CECB_TX_DATA08 0x18
> +#define CECB_TX_DATA09 0x19
> +#define CECB_TX_DATA10 0x1A
> +#define CECB_TX_DATA11 0x1B
> +#define CECB_TX_DATA12 0x1C
> +#define CECB_TX_DATA13 0x1D
> +#define CECB_TX_DATA14 0x1E
> +#define CECB_TX_DATA15 0x1F
> +#define CECB_RX_DATA00 0x20
> +#define CECB_RX_DATA01 0x21
> +#define CECB_RX_DATA02 0x22
> +#define CECB_RX_DATA03 0x23
> +#define CECB_RX_DATA04 0x24
> +#define CECB_RX_DATA05 0x25
> +#define CECB_RX_DATA06 0x26
> +#define CECB_RX_DATA07 0x27
> +#define CECB_RX_DATA08 0x28
> +#define CECB_RX_DATA09 0x29
> +#define CECB_RX_DATA10 0x2A
> +#define CECB_RX_DATA11 0x2B
> +#define CECB_RX_DATA12 0x2C
> +#define CECB_RX_DATA13 0x2D
> +#define CECB_RX_DATA14 0x2E
> +#define CECB_RX_DATA15 0x2F
> +#define CECB_LOCK_BUF 0x30
> +
> +#define CECB_LOCK_BUF_EN BIT(0)
> +
> +#define CECB_WAKEUPCTRL 0x31
> +
> +struct meson_ao_cec_g12a_device {
> + struct platform_device *pdev;
> + struct regmap *regmap;
> + struct regmap *regmap_cec;
> + spinlock_t cec_reg_lock;
> + struct cec_notifier *notify;
> + struct cec_adapter *adap;
> + struct cec_msg rx_msg;
> + struct clk *oscin;
> + struct clk *core;
> +};
> +
> +static const struct regmap_config meson_ao_cec_g12a_regmap_conf = {
> + .reg_bits = 8,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = CECB_INTR_STAT_REG,
> +};
> +
> +/*
> + * The AO-CECB embeds a dual/divider to generate a more precise
> + * 32,768KHz clock for CEC core clock.
> + * ______ ______
> + * | | | |
> + * ______ | Div1 |-| Cnt1 | ______
> + * | | /|______| |______|\ | |
> + * Xtal-->| Gate |---| ______ ______ X-X--| Gate |-->
> + * |______| | \| | | |/ | |______|
> + * | | Div2 |-| Cnt2 | |
> + * | |______| |______| |
> + * |_______________________|
> + *
> + * The dividing can be switched to single or dual, with a counter
> + * for each divider to set when the switching is done.
> + * The entire dividing mechanism can be also bypassed.
> + */
> +
> +struct meson_ao_cec_g12a_dualdiv_clk {
> + struct clk_hw hw;
> + struct regmap *regmap;
> +};
> +
> +#define hw_to_meson_ao_cec_g12a_dualdiv_clk(_hw) \
> + container_of(_hw, struct meson_ao_cec_g12a_dualdiv_clk, hw) \
> +
> +static unsigned long
> +meson_ao_cec_g12a_dualdiv_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
> + hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
> + unsigned long n1;
> + u32 reg0, reg1;
> +
> + regmap_read(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0, ®0);
> + regmap_read(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0, ®1);
> +
> + if (reg1 & CECB_CLK_CNTL_BYPASS_EN)
> + return parent_rate;
> +
> + if (reg0 & CECB_CLK_CNTL_DUAL_EN) {
> + unsigned long n2, m1, m2, f1, f2, p1, p2;
> +
> + n1 = FIELD_GET(CECB_CLK_CNTL_N1, reg0) + 1;
> + n2 = FIELD_GET(CECB_CLK_CNTL_N2, reg0) + 1;
> +
> + m1 = FIELD_GET(CECB_CLK_CNTL_M1, reg1) + 1;
> + m2 = FIELD_GET(CECB_CLK_CNTL_M1, reg1) + 1;
> +
> + f1 = DIV_ROUND_CLOSEST(parent_rate, n1);
> + f2 = DIV_ROUND_CLOSEST(parent_rate, n2);
> +
> + p1 = DIV_ROUND_CLOSEST(100000000 * m1, f1 * (m1 + m2));
> + p2 = DIV_ROUND_CLOSEST(100000000 * m2, f2 * (m1 + m2));
> +
> + return DIV_ROUND_UP(100000000, p1 + p2);
> + }
> +
> + n1 = FIELD_GET(CECB_CLK_CNTL_N1, reg0) + 1;
> +
> + return DIV_ROUND_CLOSEST(parent_rate, n1);
> +}
> +
> +static int meson_ao_cec_g12a_dualdiv_clk_enable(struct clk_hw *hw)
> +{
> + struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
> + hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
> +
> +
> + /* Disable Input & Output */
> + regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
> + CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN,
> + 0);
> +
> + /* Set N1 & N2 */
> + regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
> + CECB_CLK_CNTL_N1,
> + FIELD_PREP(CECB_CLK_CNTL_N1, 733 - 1));
> +
> + regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
> + CECB_CLK_CNTL_N2,
> + FIELD_PREP(CECB_CLK_CNTL_N2, 732 - 1));
> +
> + /* Set M1 & M2 */
> + regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG1,
> + CECB_CLK_CNTL_M1,
> + FIELD_PREP(CECB_CLK_CNTL_M1, 8 - 1));
> +
> + regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG1,
> + CECB_CLK_CNTL_M2,
> + FIELD_PREP(CECB_CLK_CNTL_M2, 11 - 1));
> +
> + /* Enable Dual divisor */
> + regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
> + CECB_CLK_CNTL_DUAL_EN, CECB_CLK_CNTL_DUAL_EN);
> +
> + /* Disable divisor bypass */
> + regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG1,
> + CECB_CLK_CNTL_BYPASS_EN, 0);
> +
> + /* Enable Input & Output */
> + regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
> + CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN,
> + CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN);
> +
> + return 0;
> +}
> +
> +static void meson_ao_cec_g12a_dualdiv_clk_disable(struct clk_hw *hw)
> +{
> + struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
> + hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
> +
> + regmap_update_bits(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0,
> + CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN,
> + 0);
> +}
> +
> +static int meson_ao_cec_g12a_dualdiv_clk_is_enabled(struct clk_hw *hw)
> +{
> + struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk =
> + hw_to_meson_ao_cec_g12a_dualdiv_clk(hw);
> + int val;
> +
> + regmap_read(dualdiv_clk->regmap, CECB_CLK_CNTL_REG0, &val);
> +
> + return !!(val & (CECB_CLK_CNTL_INPUT_EN | CECB_CLK_CNTL_OUTPUT_EN));
> +}
> +
> +static const struct clk_ops meson_ao_cec_g12a_dualdiv_clk_ops = {
> + .recalc_rate = meson_ao_cec_g12a_dualdiv_clk_recalc_rate,
> + .is_enabled = meson_ao_cec_g12a_dualdiv_clk_is_enabled,
> + .enable = meson_ao_cec_g12a_dualdiv_clk_enable,
> + .disable = meson_ao_cec_g12a_dualdiv_clk_disable,
> +};
> +
> +static int meson_ao_cec_g12a_setup_clk(struct meson_ao_cec_g12a_device *ao_cec)
> +{
> + struct meson_ao_cec_g12a_dualdiv_clk *dualdiv_clk;
> + struct device *dev = &ao_cec->pdev->dev;
> + struct clk_init_data init;
> + const char *parent_name;
> + struct clk *clk;
> + char *name;
> +
> + dualdiv_clk = devm_kzalloc(dev, sizeof(*dualdiv_clk), GFP_KERNEL);
> + if (!dualdiv_clk)
> + return -ENOMEM;
> +
> + name = kasprintf(GFP_KERNEL, "%s#dualdiv_clk", dev_name(dev));
> + if (!name)
> + return -ENOMEM;
> +
> + parent_name = __clk_get_name(ao_cec->oscin);
> +
> + init.name = name;
> + init.ops = &meson_ao_cec_g12a_dualdiv_clk_ops;
> + init.flags = 0;
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + dualdiv_clk->regmap = ao_cec->regmap;
> + dualdiv_clk->hw.init = &init;
> +
> + clk = devm_clk_register(dev, &dualdiv_clk->hw);
> + kfree(name);
> + if (IS_ERR(clk)) {
> + dev_err(dev, "failed to register clock\n");
> + return PTR_ERR(clk);
> + }
> +
> + ao_cec->core = clk;
> +
> + return 0;
> +}
> +
> +static int meson_ao_cec_g12a_read(void *context, unsigned int addr,
> + unsigned int *data)
> +{
> + struct meson_ao_cec_g12a_device *ao_cec = context;
> + u32 reg = FIELD_PREP(CECB_RW_ADDR, addr);
> + unsigned long flags;
> + int ret = 0;
> +
> + spin_lock_irqsave(&ao_cec->cec_reg_lock, flags);
> +
> + ret = regmap_write(ao_cec->regmap, CECB_RW_REG, reg);
> + if (ret)
> + goto read_out;
> +
> + ret = regmap_read_poll_timeout(ao_cec->regmap, CECB_RW_REG, reg,
> + !(reg & CECB_RW_BUS_BUSY),
> + 5, 1000);
> + if (ret)
> + goto read_out;
> +
> + ret = regmap_read(ao_cec->regmap, CECB_RW_REG, ®);
> +
> + *data = FIELD_GET(CECB_RW_RD_DATA, reg);
> +
> +read_out:
> + spin_unlock_irqrestore(&ao_cec->cec_reg_lock, flags);
> +
> + return ret;
> +}
> +
> +static int meson_ao_cec_g12a_write(void *context, unsigned int addr,
> + unsigned int data)
> +{
> + struct meson_ao_cec_g12a_device *ao_cec = context;
> + unsigned long flags;
> + u32 reg = FIELD_PREP(CECB_RW_ADDR, addr) |
> + FIELD_PREP(CECB_RW_WR_DATA, data) |
> + CECB_RW_WRITE_EN;
> + int ret = 0;
> +
> + spin_lock_irqsave(&ao_cec->cec_reg_lock, flags);
> +
> + ret = regmap_write(ao_cec->regmap, CECB_RW_REG, reg);
> +
> + spin_unlock_irqrestore(&ao_cec->cec_reg_lock, flags);
> +
> + return ret;
> +}
> +
> +static const struct regmap_config meson_ao_cec_g12a_cec_regmap_conf = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .reg_read = meson_ao_cec_g12a_read,
> + .reg_write = meson_ao_cec_g12a_write,
> + .max_register = 0xffff,
> + .fast_io = true,
> +};
> +
> +static inline void
> +meson_ao_cec_g12a_irq_setup(struct meson_ao_cec_g12a_device *ao_cec,
> + bool enable)
> +{
> + u32 cfg = CECB_INTR_DONE | CECB_INTR_EOM | CECB_INTR_NACK |
> + CECB_INTR_ARB_LOSS | CECB_INTR_INITIATOR_ERR |
> + CECB_INTR_FOLLOWER_ERR;
> +
> + regmap_write(ao_cec->regmap, CECB_INTR_MASKN_REG,
> + enable ? cfg : 0);
> +}
> +
> +static void meson_ao_cec_g12a_irq_rx(struct meson_ao_cec_g12a_device *ao_cec)
> +{
> + int i, ret = 0;
> + u32 val;
> +
> + ret = regmap_read(ao_cec->regmap_cec, CECB_RX_CNT, &val);
> +
> + ao_cec->rx_msg.len = val;
> + if (ao_cec->rx_msg.len > CEC_MAX_MSG_SIZE)
> + ao_cec->rx_msg.len = CEC_MAX_MSG_SIZE;
> +
> + for (i = 0; i < ao_cec->rx_msg.len; i++) {
> + ret |= regmap_read(ao_cec->regmap_cec,
> + CECB_RX_DATA00 + i, &val);
> +
> + ao_cec->rx_msg.msg[i] = val & 0xff;
> + }
> +
> + ret |= regmap_write(ao_cec->regmap_cec, CECB_LOCK_BUF, 0);
> + if (ret)
> + return;
> +
> + cec_received_msg(ao_cec->adap, &ao_cec->rx_msg);
> +}
> +
> +static irqreturn_t meson_ao_cec_g12a_irq(int irq, void *data)
> +{
> + struct meson_ao_cec_g12a_device *ao_cec = data;
> + u32 stat;
> +
> + regmap_read(ao_cec->regmap, CECB_INTR_STAT_REG, &stat);
> + if (stat)
> + return IRQ_WAKE_THREAD;
> +
> + return IRQ_NONE;
> +}
> +
> +static irqreturn_t meson_ao_cec_g12a_irq_thread(int irq, void *data)
> +{
> + struct meson_ao_cec_g12a_device *ao_cec = data;
> + u32 stat;
> +
> + regmap_read(ao_cec->regmap, CECB_INTR_STAT_REG, &stat);
> + regmap_write(ao_cec->regmap, CECB_INTR_CLR_REG, stat);
> +
> + if (stat & CECB_INTR_DONE)
> + cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_OK);
> +
> + if (stat & CECB_INTR_EOM)
> + meson_ao_cec_g12a_irq_rx(ao_cec);
> +
> + if (stat & CECB_INTR_NACK)
> + cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_NACK);
> +
> + if (stat & CECB_INTR_ARB_LOSS) {
> + regmap_write(ao_cec->regmap_cec, CECB_TX_CNT, 0);
> + regmap_update_bits(ao_cec->regmap_cec, CECB_CTRL,
> + CECB_CTRL_SEND | CECB_CTRL_TYPE, 0);
> + cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_ARB_LOST);
> + }
> +
> + /* Initiator reports an error on the CEC bus */
> + if (stat & CECB_INTR_INITIATOR_ERR)
> + cec_transmit_attempt_done(ao_cec->adap, CEC_TX_STATUS_ERROR);
> +
> + /* Follower reports a receive error, just reset RX buffer */
> + if (stat & CECB_INTR_FOLLOWER_ERR)
> + regmap_write(ao_cec->regmap_cec, CECB_LOCK_BUF, 0);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int
> +meson_ao_cec_g12a_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
> +{
> + struct meson_ao_cec_g12a_device *ao_cec = adap->priv;
> + int ret = 0;
> +
> + if (logical_addr == CEC_LOG_ADDR_INVALID) {
> + /* Assume this will allways succeed */
> + regmap_write(ao_cec->regmap_cec, CECB_LADD_LOW, 0);
> + regmap_write(ao_cec->regmap_cec, CECB_LADD_HIGH, 0);
> +
> + return 0;
> + } else if (logical_addr < 8) {
> + ret = regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_LOW,
> + BIT(logical_addr),
> + BIT(logical_addr));
> + } else {
> + ret = regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_HIGH,
> + BIT(logical_addr - 8),
> + BIT(logical_addr - 8));
> + }
> +
> + /* Always set Broadcast/Unregistered 15 address */
> + ret |= regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_HIGH,
> + BIT(CEC_LOG_ADDR_UNREGISTERED - 8),
> + BIT(CEC_LOG_ADDR_UNREGISTERED - 8));
> +
> + return ret ? -EIO : 0;
> +}
> +
> +static int meson_ao_cec_g12a_transmit(struct cec_adapter *adap, u8 attempts,
> + u32 signal_free_time, struct cec_msg *msg)
> +{
> + struct meson_ao_cec_g12a_device *ao_cec = adap->priv;
> + unsigned int type;
> + int ret = 0;
> + u32 val;
> + int i;
> +
> + /* Check if RX is in progress */
> + ret = regmap_read(ao_cec->regmap_cec, CECB_LOCK_BUF, &val);
> + if (ret)
> + return ret;
> + if (val & CECB_LOCK_BUF_EN)
> + return -EBUSY;
> +
> + /* Check if TX Busy */
> + ret = regmap_read(ao_cec->regmap_cec, CECB_CTRL, &val);
> + if (ret)
> + return ret;
> + if (val & CECB_CTRL_SEND)
> + return -EBUSY;
> +
> + switch (signal_free_time) {
> + case CEC_SIGNAL_FREE_TIME_RETRY:
> + type = CECB_CTRL_TYPE_RETRY;
> + break;
> + case CEC_SIGNAL_FREE_TIME_NEXT_XFER:
> + type = CECB_CTRL_TYPE_NEXT;
> + break;
> + case CEC_SIGNAL_FREE_TIME_NEW_INITIATOR:
> + default:
> + type = CECB_CTRL_TYPE_NEW;
> + break;
> + }
> +
> + for (i = 0; i < msg->len; i++)
> + ret |= regmap_write(ao_cec->regmap_cec, CECB_TX_DATA00 + i,
> + msg->msg[i]);
> +
> + ret |= regmap_write(ao_cec->regmap_cec, CECB_TX_CNT, msg->len);
> + if (ret)
> + return -EIO;
> +
> + ret = regmap_update_bits(ao_cec->regmap_cec, CECB_CTRL,
> + CECB_CTRL_SEND |
> + CECB_CTRL_TYPE,
> + CECB_CTRL_SEND |
> + FIELD_PREP(CECB_CTRL_TYPE, type));
> +
> + return ret;
> +}
> +
> +static int meson_ao_cec_g12a_adap_enable(struct cec_adapter *adap, bool enable)
> +{
> + struct meson_ao_cec_g12a_device *ao_cec = adap->priv;
> +
> + meson_ao_cec_g12a_irq_setup(ao_cec, false);
> +
> + regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
> + CECB_GEN_CNTL_RESET, CECB_GEN_CNTL_RESET);
> +
> + if (!enable)
> + return 0;
> +
> + /* Setup Filter */
> + regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
> + CECB_GEN_CNTL_FILTER_TICK_SEL |
> + CECB_GEN_CNTL_FILTER_DEL,
> + FIELD_PREP(CECB_GEN_CNTL_FILTER_TICK_SEL,
> + CECB_GEN_CNTL_FILTER_TICK_1US) |
> + FIELD_PREP(CECB_GEN_CNTL_FILTER_DEL, 7));
> +
> + /* Enable System Clock */
> + regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
> + CECB_GEN_CNTL_SYS_CLK_EN,
> + CECB_GEN_CNTL_SYS_CLK_EN);
> +
> + /* Enable gated clock (Normal mode). */
> + regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
> + CECB_GEN_CNTL_CLK_CTRL_MASK,
> + FIELD_PREP(CECB_GEN_CNTL_CLK_CTRL_MASK,
> + CECB_GEN_CNTL_CLK_ENABLE));
> +
> + /* Release Reset */
> + regmap_update_bits(ao_cec->regmap, CECB_GEN_CNTL_REG,
> + CECB_GEN_CNTL_RESET, 0);
> +
> + meson_ao_cec_g12a_irq_setup(ao_cec, true);
> +
> + return 0;
> +}
> +
> +static const struct cec_adap_ops meson_ao_cec_g12a_ops = {
> + .adap_enable = meson_ao_cec_g12a_adap_enable,
> + .adap_log_addr = meson_ao_cec_g12a_set_log_addr,
> + .adap_transmit = meson_ao_cec_g12a_transmit,
> +};
> +
> +static int meson_ao_cec_g12a_probe(struct platform_device *pdev)
> +{
> + struct meson_ao_cec_g12a_device *ao_cec;
> + struct platform_device *hdmi_dev;
> + struct device_node *np;
> + struct resource *res;
> + void __iomem *base;
> + int ret, irq;
> +
> + np = of_parse_phandle(pdev->dev.of_node, "hdmi-phandle", 0);
> + if (!np) {
> + dev_err(&pdev->dev, "Failed to find hdmi node\n");
> + return -ENODEV;
> + }
> +
> + hdmi_dev = of_find_device_by_node(np);
> + of_node_put(np);
> + if (hdmi_dev == NULL)
> + return -EPROBE_DEFER;
> +
> + put_device(&hdmi_dev->dev);
> + ao_cec = devm_kzalloc(&pdev->dev, sizeof(*ao_cec), GFP_KERNEL);
> + if (!ao_cec)
> + return -ENOMEM;
> +
> + spin_lock_init(&ao_cec->cec_reg_lock);
> + ao_cec->pdev = pdev;
> +
> + ao_cec->notify = cec_notifier_get(&hdmi_dev->dev);
> + if (!ao_cec->notify)
> + return -ENOMEM;
> +
> + ao_cec->adap = cec_allocate_adapter(&meson_ao_cec_g12a_ops, ao_cec,
> + "meson_g12a_ao_cec",
> + CEC_CAP_DEFAULTS,
> + CEC_MAX_LOG_ADDRS);
> + if (IS_ERR(ao_cec->adap)) {
> + ret = PTR_ERR(ao_cec->adap);
> + goto out_probe_notify;
> + }
> +
> + ao_cec->adap->owner = THIS_MODULE;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base)) {
> + ret = PTR_ERR(base);
> + goto out_probe_adapter;
> + }
> +
> + ao_cec->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> + &meson_ao_cec_g12a_regmap_conf);
> + if (IS_ERR(ao_cec->regmap)) {
> + ret = PTR_ERR(ao_cec->regmap);
> + goto out_probe_adapter;
> + }
> +
> + ao_cec->regmap_cec = devm_regmap_init(&pdev->dev, NULL, ao_cec,
> + &meson_ao_cec_g12a_cec_regmap_conf);
> + if (IS_ERR(ao_cec->regmap_cec)) {
> + ret = PTR_ERR(ao_cec->regmap_cec);
> + goto out_probe_adapter;
> + }
> +
> + irq = platform_get_irq(pdev, 0);
> + ret = devm_request_threaded_irq(&pdev->dev, irq,
> + meson_ao_cec_g12a_irq,
> + meson_ao_cec_g12a_irq_thread,
> + 0, NULL, ao_cec);
> + if (ret) {
> + dev_err(&pdev->dev, "irq request failed\n");
> + goto out_probe_adapter;
> + }
> +
> + ao_cec->oscin = devm_clk_get(&pdev->dev, "oscin");
> + if (IS_ERR(ao_cec->oscin)) {
> + dev_err(&pdev->dev, "oscin clock request failed\n");
> + ret = PTR_ERR(ao_cec->oscin);
> + goto out_probe_adapter;
> + }
> +
> + ret = meson_ao_cec_g12a_setup_clk(ao_cec);
> + if (ret)
> + goto out_probe_adapter;
> +
> + ret = clk_prepare_enable(ao_cec->core);
> + if (ret) {
> + dev_err(&pdev->dev, "core clock enable failed\n");
> + goto out_probe_adapter;
> + }
> +
> + device_reset_optional(&pdev->dev);
> +
> + platform_set_drvdata(pdev, ao_cec);
> +
> + ret = cec_register_adapter(ao_cec->adap, &pdev->dev);
> + if (ret < 0) {
> + cec_notifier_put(ao_cec->notify);
> + goto out_probe_core_clk;
> + }
> +
> + /* Setup Hardware */
> + regmap_write(ao_cec->regmap, CECB_GEN_CNTL_REG, CECB_GEN_CNTL_RESET);
> +
> + cec_register_cec_notifier(ao_cec->adap, ao_cec->notify);
> +
> + return 0;
> +
> +out_probe_core_clk:
> + clk_disable_unprepare(ao_cec->core);
> +
> +out_probe_adapter:
> + cec_delete_adapter(ao_cec->adap);
> +
> +out_probe_notify:
> + cec_notifier_put(ao_cec->notify);
> +
> + dev_err(&pdev->dev, "CEC controller registration failed\n");
> +
> + return ret;
> +}
> +
> +static int meson_ao_cec_g12a_remove(struct platform_device *pdev)
> +{
> + struct meson_ao_cec_g12a_device *ao_cec = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(ao_cec->core);
> +
> + cec_unregister_adapter(ao_cec->adap);
> +
> + cec_notifier_put(ao_cec->notify);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id meson_ao_cec_g12a_of_match[] = {
> + { .compatible = "amlogic,meson-g12a-ao-cec-b", },
-------------------------------------------------/\
Sorry this fix went to /dev/null, I'll resend when the bindings are
reviewed.
Neil
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, meson_ao_cec_g12a_of_match);
> +
> +static struct platform_driver meson_ao_cec_g12a_driver = {
> + .probe = meson_ao_cec_g12a_probe,
> + .remove = meson_ao_cec_g12a_remove,
> + .driver = {
> + .name = "meson-ao-cec-g12a",
> + .of_match_table = of_match_ptr(meson_ao_cec_g12a_of_match),
> + },
> +};
> +
> +module_platform_driver(meson_ao_cec_g12a_driver);
> +
> +MODULE_DESCRIPTION("Meson AO CEC G12A Controller driver");
> +MODULE_AUTHOR("Neil Armstrong <narmstrong@...libre.com>");
> +MODULE_LICENSE("GPL");
>
Powered by blists - more mailing lists