lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1bebaf0766988a9f27cbbcb9bb35e26f@codeaurora.org>
Date:   Tue, 02 Apr 2019 17:32:54 +0530
From:   Balakrishna Godavarthi <bgodavar@...eaurora.org>
To:     Matthias Kaehlcke <mka@...omium.org>
Cc:     Marcel Holtmann <marcel@...tmann.org>,
        Johan Hedberg <johan.hedberg@...il.com>,
        linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
        Hemantg <hemantg@...eaurora.org>
Subject: Re: [PATCH 2/2] Bluetooth: hci_qca: wcn3990: Drop baudrate change
 vendor event

Hi Matthias,

On 2019-04-01 22:42, Matthias Kaehlcke wrote:
> On Mon, Apr 01, 2019 at 01:48:23PM +0530, Balakrishna Godavarthi wrote:
>> Hi Matthias,
>> 
>> On 2019-04-01 13:29, Balakrishna Godavarthi wrote:
>> > Hi Matthias,
>> >
>> > Sorry for the late reply i was on vacation.
>> >
>> > On 2019-03-08 05:00, Matthias Kaehlcke wrote:
>> > > On Thu, Mar 07, 2019 at 10:20:09AM -0800, Matthias Kaehlcke wrote:
>> > > > Hi Balakrishna,
>> > > >
>> > > > On Thu, Mar 07, 2019 at 10:35:08AM +0530, Balakrishna Godavarthi
>> > > > wrote:
>> > > > > hi Matthias,
>> > > > >
>> > > > > On 2019-03-07 06:10, Matthias Kaehlcke wrote:
>> > > > > > Firmware download to the WCN3990 often fails with a 'TLV response size
>> > > > > > mismatch' error:
>> > > > > >
>> > > > > > [  133.064659] Bluetooth: hci0: setting up wcn3990
>> > > > > > [  133.489150] Bluetooth: hci0: QCA controller version 0x02140201
>> > > > > > [  133.495245] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
>> > > > > > [  133.507214] Bluetooth: hci0: QCA TLV response size mismatch
>> > > > > > [  133.513265] Bluetooth: hci0: QCA Failed to download patch (-84)
>> > > > > >
>> > > > > > This is caused by a vendor event that corresponds to an earlier command
>> > > > > > to change the baudrate. The event is not processed in the context of the
>> > > > > > baudrate change and later interpreted as response to the firmware
>> > > > > > download command (which is also a vendor command), but the driver
>> > > > > > detects
>> > > > > > that the event doesn't have the expected amount of associated data.
>> > > > > >
>> > > > > > More details:
>> > > > > >
>> > > > > > For the WCN3990 the vendor command for a baudrate change isn't sent as
>> > > > > > synchronous HCI command, because the controller sends the corresponding
>> > > > > > vendor event with the new baudrate. The event is received and decoded
>> > > > > > after the baudrate change of the host port.
>> > > > > >
>> > > > > > Identify the 'unused' event when it is received and don't add it to
>> > > > > > the queue of RX frames.
>> > > > > >
>> > > > > > Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
>> > > > > > ---
>> > > > >
>> > > > > ...
>> > > > >
>> > > > > Can you test by reverting this change "94d6671473924".
>> > > >
>> > > > The issue is still reproducible.
>> > > >
>> > > > > We need at least 15ms minimum delay for the soc to change its baud rate and
>> > > > > respond to the with command complete event.
>> > > >
>> > > > The baudrate change has clearly been successful when the problem is
>> > > > observed, since the host receives the vendor event with the new
>> > > > baudrate.
>> > >
>> > > I forgot to mention this earlier: the controller doesn't send a
>> > > command complete event for the command, or at least not a correct
>> > > one.
>> > >
>> > > That's the data that is received:
>> > >
>> > > 04 0e 04 01 00 00 00
>> > >             ~~ ~~
>> > >
>> > [Bala]: can you share me the command sent and event recevied.
>> >  I see that we receive a command complete event for the baud rate
>> > change command.
>> >
>> > command sent: 01 48 fc 01 11
>> > vendor specific event: 04 ff 02 92 01
>> > command complete event: 04 0e 04 01 00 00 00.
>> >
>> >
>> >
>> > > This is *a* command complete event, but the opcode is 0x0000 instead
>> > > of the earlier command. The same happens for the firmware
>> > > download/read version command, which is the reason why the command
>> > > complete injection mess
>> > > (https://lore.kernel.org/patchwork/patch/1027955/) is needed in one
>> > > way or another.
>> > >
>> > [Bala]: fw download approach is different where we use
>> > __hci_cmd_sync() where as here we use hci_uart_tx_wakeup()
>> >         which directly calls the hci_uart_write_work(). so even we
>> > send an valid opcode or not for baudrate change will bot matter.
>> >
>> [Bala]: i miss understood the comment. Yes your true. in the all 
>> vendor
>> commands SoC responds with an 0x0000 opcode.
> 
> And IIUC this is not compliant with the spec, or at least the BT core
> expects the actual opcode to consider the command to be completed.

[Bala]: Did you try increasing the the baud rate change timeout to 50ms 
instead of 10ms.
         i suspect it is an timing issue.
         I have see on the hardware sniffer that the chip is responding 
with command complete event with
         the newer baud rate after 15ms.
-- 
Regards
Balakrishna.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ