linux-kernel - Re: [PATCH v2 00/10]

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20190402124536.GC3430@piout.net>
Date:   Tue, 2 Apr 2019 14:45:36 +0200
From:   Alexandre Belloni <alexandre.belloni@...tlin.com>
To:     Stephen Boyd <sboyd@...nel.org>
Cc:     Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>,
        Michael Turquette <mturquette@...libre.com>,
        linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 00/10]

Please disregard that series as this doesn't include the proper patches.

On 02/04/2019 14:40:06+0200, Alexandre Belloni wrote:
> This series add support for the sam9x60 clocks handled by the PMC.
> 
> The first four patches are preparatory patches to handle register layout
> and offset differences. Then, a driver for the new interface for PLLs is
> added and the final patch is the driver for the sam9x60 PMC.
> 
> changes in v2:
>  - rebased on v5.1-rc1
>  - changed the PLL_ACR handling to conform to the datasheet errata
> 
> Alexandre Belloni (7):
>   clk: at91: allow configuring peripheral PCR layout
>   clk: at91: allow configuring generated PCR layout
>   clk: at91: usb: Add sam9x60 support
>   clk: at91: master: Add sam9x60 support
>   clk: at91: add sam9x60 PLL driver
>   dt-bindings: clk: at91: add bindings for SAM9X60 pmc
>   clk: at91: add sam9x60 pmc driver
> 
> Claudiu Beznea (3):
>   clk: at91: sckc: add support to specify registers bit offsets
>   clk: at91: sckc: add support for SAM9X60
>   dt-bindings: clk: at91: add bindings for SAM9X60's slow clock
>     controller
> 
>  .../devicetree/bindings/clock/at91-clock.txt  |   6 +-
>  drivers/clk/at91/Makefile                     |   2 +
>  drivers/clk/at91/at91sam9x5.c                 |   9 +
>  drivers/clk/at91/clk-generated.c              |  48 +--
>  drivers/clk/at91/clk-master.c                 |   8 +-
>  drivers/clk/at91/clk-peripheral.c             |  46 +--
>  drivers/clk/at91/clk-sam9x60-pll.c            | 330 ++++++++++++++++++
>  drivers/clk/at91/clk-usb.c                    |  33 +-
>  drivers/clk/at91/dt-compat.c                  |  12 +-
>  drivers/clk/at91/pmc.h                        |  23 ++
>  drivers/clk/at91/sam9x60.c                    | 307 ++++++++++++++++
>  drivers/clk/at91/sama5d2.c                    |  10 +
>  drivers/clk/at91/sama5d4.c                    |   8 +
>  drivers/clk/at91/sckc.c                       | 142 ++++++--
>  include/linux/clk/at91_pmc.h                  |  12 +-
>  15 files changed, 895 insertions(+), 101 deletions(-)
>  create mode 100644 drivers/clk/at91/clk-sam9x60-pll.c
>  create mode 100644 drivers/clk/at91/sam9x60.c
> 
> -- 
> 2.20.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com