| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <6105BFF6-41B1-4DB8-A78D-20BC2E35C014@canonical.com>
Date: Tue, 2 Apr 2019 12:18:23 +0800
From: Kai Heng Feng <kai.heng.feng@...onical.com>
To: Mario.Limonciello@...l.com
Cc: Andy Shevchenko <andy.shevchenko@...il.com>, hdegoede@...hat.com,
benjamin.tissoires@...hat.com, hotwater438@...anota.com,
jikos@...nel.org, swboyd@...omium.org, bigeasy@...utronix.de,
dtor@...omium.org, linux-input@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ELAN touchpad i2c_hid bugs fix
> On Apr 2, 2019, at 5:37 AM, <Mario.Limonciello@...l.com>
> <Mario.Limonciello@...l.com> wrote:
>
>> -----Original Message-----
>> From: Andy Shevchenko <andy.shevchenko@...il.com>
>> Sent: Thursday, March 21, 2019 4:48 AM
>> To: Kai-Heng Feng; Limonciello, Mario
>> Cc: Hans de Goede; Benjamin Tissoires; hotwater438@...anota.com; Jiri
>> Kosina;
>> Stephen Boyd; Sebastian Andrzej Siewior; Dmitry Torokhov; open list:HID
>> CORE
>> LAYER; lkml
>> Subject: Re: [PATCH] ELAN touchpad i2c_hid bugs fix
>>
>>
>> [EXTERNAL EMAIL]
>>
>> +Cc: Mario
>>
>> Mario, do you have any insights about the issue with touchpad on Dell
>> system described below?
>
> My apologies, this got lost while I was on vacation.
>
>>
>> On Thu, Mar 21, 2019 at 6:08 AM Kai-Heng Feng
>> <kai.heng.feng@...onical.com> wrote:
>>>
>>> at 01:18, Andy Shevchenko <andy.shevchenko@...il.com> wrote:
>>>
>>>> On Wed, Mar 20, 2019 at 6:55 PM Kai-Heng Feng
>>>> <kai.heng.feng@...onical.com> wrote:
>>>>> at 23:39, Hans de Goede <hdegoede@...hat.com> wrote:
>>>>>> On 3/20/19 3:37 PM, Benjamin Tissoires wrote:
>>>>
>>>>>> Benjamin, what I find interesting here is that the BOGUS_IRQ quirk
>>>>>> is also used on Elan devices, I suspect that these Elan devices
>>>>>> likely also need the I2C_HID_QUIRK_FORCE_TRIGGER_FALLING quirk
>>>>>> and then they probably will no longer need the bogus IRQ flag,
>>>>>> if you know about bugreports with an acpidump for any of the devices
>>>>>> needing the bogus IRQ quirk, then I (or you) can check how the IRQ is
>>>>>> declared there, I suspect it will be declared as level-low, just like
>>>>>> with the laptop this patch was written for. And it probably need to
>>>>>> be edge-falling instead of level-low just like this case.
>>>>>
>>>>> First, I’ve already tried using IRQF_TRIGGER_FALLING, unfortunately it
>>>>> doesn’t solve the issue for me.
>>>>>
>>>>> I talked to Elan once, and they confirm the correct IRQ trigger is
>>>>> level
>>>>> low. So forcing falling trigger may break other platforms.
>>>>
>>>> As far as I understood Vladislav the quirk he got from Elan as well.
>>>
>>> Ok, then this is really weird.
>>>
>>>>
>>>>> Recently we found that Elan touchpad doesn’t like GpioInt() from its
>>>>> _CRS.
>>>>> Once the Interrupt() is used instead, the issue goes away.
>>>>
>>>> IIRC i2c core tries to get interrupt from Interrupt() resource and
>>>> then falls back to GpioInt().
>>>> See i2c_acpi_get_info() and i2c_device_probe().
>>>
>>> Here’s its ASL:
>>>
>>> Scope (\_SB.PCI0.I2C4)
>>> {
>>> Device (TPD0)
>>> {
>>> Name (_ADR, One) // _ADR: Address
>>> Name (_HID, "DELL08AE") // _HID: Hardware ID
>>> Name (_CID, "PNP0C50" /* HID Protocol Device (I2C bus) */) // _CID:
>> Compatible ID
>>> Name (_UID, One) // _UID: Unique ID
>>> Name (_S0W, 0x04) // _S0W: S0 Device Wake State
>>> Name (SBFB, ResourceTemplate ()
>>> {
>>> I2cSerialBusV2 (0x002C, ControllerInitiated, 0x00061A80,
>>> AddressingMode7Bit, "\\_SB.PCI0.I2C4",
>>> 0x00, ResourceConsumer, , Exclusive,
>>> )
>>> })
>>> Name (SBFG, ResourceTemplate ()
>>> {
>>> GpioInt (Level, ActiveLow, ExclusiveAndWake, PullUp, 0x0000,
>>> "\\_SB.GPO1", 0x00, ResourceConsumer, ,
>>> )
>>> { // Pin list
>>> 0x0012
>>> }
>>> })
>>> Name (SBFI, ResourceTemplate ()
>>> {
>>> Interrupt (ResourceConsumer, Level, ActiveLow, ExclusiveAndWake, ,, )
>>> {
>>> 0x0000003C,
>>> }
>>> })
>>> Method (_INI, 0, NotSerialized) // _INI: Initialize
>>> {
>>> }
>>> Method (_STA, 0, NotSerialized) // _STA: Status
>>> {
>>> If ((TCPD == One))
>>> {
>>> Return (0x0F)
>>> }
>>>
>>> Return (Zero)
>>> }
>>> Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
>>> {
>>> If ((OSYS < 0x07DC))
>>> {
>>> Return (SBFI) /* \_SB_.PCI0.I2C4.TPD0.SBFI */
>>> }
>>>
>>> Return (ConcatenateResTemplate (SBFB, SBFG))
>>> }
>>> Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
>>> {
>>> If ((Arg0 == ToUUID ("3cdff6f7-4267-4555-ad05-b30a3d8938de") /* HID
>> I2C Device */))
>>> {
>>> If ((Arg2 == Zero))
>>> {
>>> If ((Arg1 == One))
>>> {
>>> Return (Buffer (One)
>>> {
>>> 0x03 // .
>>> })
>>> }
>>> Else
>>> {
>>> Return (Buffer (One)
>>> {
>>> 0x00 // .
>>> })
>>> }
>>> }
>>> ElseIf ((Arg2 == One))
>>> {
>>> Return (0x20)
>>> }
>>> Else
>>> {
>>> Return (Buffer (One)
>>> {
>>> 0x00 // .
>>> })
>>> }
>>> }
>>> ElseIf ((Arg0 == ToUUID ("ef87eb82-f951-46da-84ec-14871ac6f84b")))
>>> {
>>> If ((Arg2 == Zero))
>>> {
>>> If ((Arg1 == One))
>>> {
>>> Return (Buffer (One)
>>> {
>>> 0x03 // .
>>> })
>>> }
>>> }
>>>
>>> If ((Arg2 == One))
>>> {
>>> Return (ConcatenateResTemplate (SBFB, SBFG))
>>> }
>>>
>>> Return (Buffer (One)
>>> {
>>> 0x00 // .
>>> })
>>> }
>>> }
>>> Else
>>> {
>>> Return (Buffer (One)
>>> {
>>> 0x00 // .
>>> })
>>> }
>>> }
>>> }
>>> }
>>>
>>> Change SBFG to SBFI in its _CRS can workaround the issue.
>>> Is ASL in this form possible to do the flow you described?
>>>
>>> Kai-Heng
>>>
>>>>
>>>>> But I am not sure how to patch its DSDT/SSDT in i2c-hid.
>
> Is this pre-production HW? If so, maybe this is a case that we should talk
> about custom OSI string to run the ASL differently.
Some are already shipped.
>
> The other option would be to create a new ASL method in FW and from Linux
> side a quirk that calls this new ASL method.
>
Since this patch is for ASUS Laptop, I think a more generic solution from
driver layer is preferred.
Kai-Heng
Powered by blists - more mailing lists