| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e60c1bb8-2b30-50b0-4864-6e0db8797b2c@nvidia.com>
Date: Wed, 3 Apr 2019 16:15:25 +0530
From: Vidya Sagar <vidyas@...dia.com>
To: Kishon Vijay Abraham I <kishon@...com>, <bhelgaas@...gle.com>,
<robh+dt@...nel.org>, <mark.rutland@....com>,
<thierry.reding@...il.com>, <jonathanh@...dia.com>,
<catalin.marinas@....com>, <will.deacon@....com>,
<lorenzo.pieralisi@....com>, <jingoohan1@...il.com>,
<gustavo.pimentel@...opsys.com>, <mperttunen@...dia.com>,
<tiwai@...e.de>, <spujar@...dia.com>, <skomatineni@...dia.com>,
<liviu.dudau@....com>, <krzk@...nel.org>, <heiko@...ech.de>,
<horms+renesas@...ge.net.au>, <olof@...om.net>,
<maxime.ripard@...tlin.com>, <andy.gross@...aro.org>,
<bjorn.andersson@...aro.org>, <jagan@...rulasolutions.com>,
<enric.balletbo@...labora.com>, <ezequiel@...labora.com>,
<stefan.wahren@...e.com>, <marc.w.gonzalez@...e.fr>,
<l.stach@...gutronix.de>, <tpiepho@...inj.com>,
<hayashi.kunihiko@...ionext.com>, <yue.wang@...ogic.com>,
<shawn.lin@...k-chips.com>, <xiaowei.bao@....com>
CC: <linux-pci@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <kthota@...dia.com>,
<mmaddireddy@...dia.com>
Subject: Re: [PATCH 08/10] phy: tegra: Add PCIe PIPE2UPHY support
On 4/3/2019 1:35 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On 26/03/19 8:43 PM, Vidya Sagar wrote:
>> Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface
>> with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module.
>> For each PCIe lane of a controller, there is a P2U unit instantiated at
>> hardware level. This driver provides support for the programming required
>> for each P2U that is going to be used for a PCIe controller.
>>
>> Signed-off-by: Vidya Sagar <vidyas@...dia.com>
>> ---
>> drivers/phy/tegra/Kconfig | 7 ++
>> drivers/phy/tegra/Makefile | 1 +
>> drivers/phy/tegra/pcie-p2u-tegra194.c | 138 ++++++++++++++++++++++++++++++++++
>> 3 files changed, 146 insertions(+)
>> create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c
>>
>> diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig
>> index a3b1de953fb7..1460c060fa70 100644
>> --- a/drivers/phy/tegra/Kconfig
>> +++ b/drivers/phy/tegra/Kconfig
>> @@ -6,3 +6,10 @@ config PHY_TEGRA_XUSB
>>
>> To compile this driver as a module, choose M here: the module will
>> be called phy-tegra-xusb.
>> +
>> +config PHY_TEGRA194_PCIE_P2U
>> + tristate "NVIDIA Tegra P2U PHY Driver"
>> + depends on ARCH_TEGRA
>
> COMPILE_TEST
Done.
>> + select GENERIC_PHY
>> + help
>> + Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x SOCs.
>> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
>> index 898589238fd9..f85b2c86643d 100644
>> --- a/drivers/phy/tegra/Makefile
>> +++ b/drivers/phy/tegra/Makefile
>> @@ -4,3 +4,4 @@ phy-tegra-xusb-y += xusb.o
>> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
>> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
>> phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
>> +obj-$(CONFIG_PHY_TEGRA194_PCIE_P2U) += pcie-p2u-tegra194.o
>> diff --git a/drivers/phy/tegra/pcie-p2u-tegra194.c b/drivers/phy/tegra/pcie-p2u-tegra194.c
>> new file mode 100644
>> index 000000000000..bb2412ec4765
>> --- /dev/null
>> +++ b/drivers/phy/tegra/pcie-p2u-tegra194.c
>> @@ -0,0 +1,138 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * P2U (PIPE to UPHY) driver for Tegra T194 SoC
>> + *
>> + * Copyright (C) 2018 NVIDIA Corporation.
>
> 2019
Done.
>> + *
>> + * Author: Vidya Sagar <vidyas@...dia.com>
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/of.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_platform.h>
>> +#include <soc/tegra/bpmp-abi.h>
>> +
>> +#define P2U_PERIODIC_EQ_CTRL_GEN3 0xc0
>> +#define P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN BIT(0)
>> +#define P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN BIT(1)
>> +#define P2U_PERIODIC_EQ_CTRL_GEN4 0xc4
>> +#define P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN BIT(1)
>> +
>> +#define P2U_RX_DEBOUNCE_TIME 0xa4
>> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK 0xFFFF
>> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL 160
>> +
>> +struct tegra_p2u {
>> + void __iomem *base;
>> +};
>> +
>> +static int tegra_p2u_power_off(struct phy *x)
>> +{
>> + return 0;
>
> Empty phy_ops are not required.
Done.
>> +}
>> +
>> +static int tegra_p2u_power_on(struct phy *x)
>> +{
>> + u32 val;
>> + struct tegra_p2u *phy = phy_get_drvdata(x);
>> +
>> + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN3);
>> + val &= ~P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN;
>> + val |= P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN;
>> + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN3);
>> +
>> + val = readl(phy->base + P2U_PERIODIC_EQ_CTRL_GEN4);
>> + val |= P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN;
>> + writel(val, phy->base + P2U_PERIODIC_EQ_CTRL_GEN4);
>> +
>> + val = readl(phy->base + P2U_RX_DEBOUNCE_TIME);
>> + val &= ~P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK;
>> + val |= P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL;
>> + writel(val, phy->base + P2U_RX_DEBOUNCE_TIME);
>
> This looks more like a init configuration rather than power on.
>> +
>> + return 0;
>> +}
>> +
>> +static int tegra_p2u_init(struct phy *x)
>> +{
>> + return 0;
>> +}
>> +
>> +static int tegra_p2u_exit(struct phy *x)
>> +{
>> + return 0;
>> +}
>
> Empty functions are not required.
Done.
>> +
>> +static const struct phy_ops ops = {
>> + .init = tegra_p2u_init,
>> + .exit = tegra_p2u_exit,
>> + .power_on = tegra_p2u_power_on,
>> + .power_off = tegra_p2u_power_off,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int tegra_p2u_probe(struct platform_device *pdev)
>> +{
>> + struct tegra_p2u *phy;
>> + struct phy *generic_phy;
>> + struct phy_provider *phy_provider;
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> +
>> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
>> + if (!phy)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base");
>> + phy->base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(phy->base))
>> + return PTR_ERR(phy->base);
>> +
>> + platform_set_drvdata(pdev, phy);
>> +
>> + generic_phy = devm_phy_create(dev, NULL, &ops);
>> + if (IS_ERR(generic_phy))
>> + return PTR_ERR(generic_phy);
>> +
>> + phy_set_drvdata(generic_phy, phy);
>> +
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> + if (IS_ERR(phy_provider))
>> + return PTR_ERR(phy_provider);
>> +
>
> return PTR_ERR_OR_ZERO(phy_provider);
Done.
>> + return 0;
>> +}
>> +
>> +static int tegra_p2u_remove(struct platform_device *pdev)
>> +{
>> + return 0;
>> +}
>
> not required.
I think this is still required as this driver can be made as a module right?
>
> Thanks
> Kishon
>
Powered by blists - more mailing lists