linux-kernel - [PATCH 1/1] spi: pxa2xxx: change "no DMA channels..." msg from debug to warning

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1554468022-17416-1-git-send-email-f.suligoi@asem.it>
Date:   Fri, 5 Apr 2019 14:40:22 +0200
From:   Flavio Suligoi <f.suligoi@...m.it>
To:     Daniel Mack <daniel@...que.org>,
        Haojian Zhuang <haojian.zhuang@...il.com>,
        Robert Jarzmik <robert.jarzmik@...e.fr>,
        Mark Brown <broonie@...nel.org>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <linux-spi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Flavio Suligoi <f.suligoi@...m.it>
Subject: [PATCH 1/1] spi: pxa2xxx: change "no DMA channels..." msg from debug to warning

Change the type of the diagnostic message:

"no DMA channels available, using PIO"

from debug to warning.

The lack of an available DMA channel is very important regard the
spi-pxa2xx performance. The transfer speed can be reduced more than 50%.

So it is very important to warn the user about this, without enabling
the full SPI debug with CONFIG_SPI_DEBUG.

Moreover, enabling the full SPI debug only to enable this specific
debug message, the dmesg buffer fills quickly with a lot of
repetitive information during the SPI data transfer.
This cause the loss of all the first important messages
written during the initialization.

Signed-off-by: Flavio Suligoi <f.suligoi@...m.it>
---
 drivers/spi/spi-pxa2xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 6160fe0..f7068cc 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1696,7 +1696,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	if (platform_info->enable_dma) {
 		status = pxa2xx_spi_dma_setup(drv_data);
 		if (status) {
-			dev_dbg(dev, "no DMA channels available, using PIO\n");
+			dev_warn(dev, "no DMA channels available, using PIO\n");
 			platform_info->enable_dma = false;
 		} else {
 			controller->can_dma = pxa2xx_spi_can_dma;
-- 
2.7.4