lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5CAAB293.3080600@huawei.com>
Date:   Mon, 8 Apr 2019 10:31:47 +0800
From:   "Leizhen (ThunderTown)" <thunder.leizhen@...wei.com>
To:     Will Deacon <will.deacon@....com>
CC:     Jean-Philippe Brucker <jean-philippe.brucker@....com>,
        Robin Murphy <robin.murphy@....com>,
        Joerg Roedel <joro@...tes.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        iommu <iommu@...ts.linux-foundation.org>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 0/2] iommu/arm-smmu-v3: make sure the kdump kernel can
 work well when smmu is enabled

Hi Will,

On 2019/4/4 23:30, Will Deacon wrote:
> Hi Zhen Lei,
> 
> On Mon, Mar 18, 2019 at 09:12:41PM +0800, Zhen Lei wrote:
>> v1 --> v2:
>> 1. Drop part2. Now, we only use the SMMUv3 hardware feature STE.config=0b000
>> (Report abort to device, no event recorded) to suppress the event messages
>> caused by the unexpected devices.
>> 2. rewrite the patch description.
> 
> This issue came up a while back:
> 
> https://lore.kernel.org/linux-pci/20180302103032.GB19323@arm.com/
> 
> and I'd still prefer to solve it using the disable_bypass logic which we
> already have. Something along the lines of the diff below?

Yes, my patches also use disable_bypass=1(set ste.config=0b000). If
SMMU_IDR0.ST_LEVEL=0(Linear Stream table supported), then all STE entries
are allocated and initialized(set ste.config=0b000). But if SMMU_IDR0.ST_LEVEL=1
(2-level Stream Table), we only allocated and initialized the first level tables,
but leave level 2 tables dynamic allocated. That means, C_BAD_STREAMID(eventid=0x2)
will be reported, if an unexpeted device access memory without reinitialized in
kdump kernel. So my patches allocated a dummy level 2 table(STE table), and make
all level 1 table entries pointer to it in advance. That means abort all unexpected
devices memory access base this dummy STE table. When an expected device(need to be
used in kdump kernel) attached, we will allocate a new level 2 table(STE table)
accordingly, but keep others still pointer to the dummy STE table.


> 
> We're relying on the DMA API not subsequently requesting a passthrough
> domain, but it should only do that if you've configured your crashkernel
> to do so.
> 
> Will
> 
> --->8
> 
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index d3880010c6cf..91b8f3b2ee25 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -2454,13 +2454,9 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
>  	/* Clear CR0 and sync (disables SMMU and queue processing) */
>  	reg = readl_relaxed(smmu->base + ARM_SMMU_CR0);
>  	if (reg & CR0_SMMUEN) {
> -		if (is_kdump_kernel()) {
> -			arm_smmu_update_gbpa(smmu, GBPA_ABORT, 0);
> -			arm_smmu_device_disable(smmu);
> -			return -EBUSY;
> -		}
> -
>  		dev_warn(smmu->dev, "SMMU currently enabled! Resetting...\n");
> +		WARN_ON(is_kdump_kernel() && !disable_bypass);
> +		arm_smmu_update_gbpa(smmu, GBPA_ABORT, 0);
>  	}
>  
>  	ret = arm_smmu_device_disable(smmu);
> 
> .
> 

-- 
Thanks!
BestRegards

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ