[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190408103240.GF6644@ulmo>
Date: Mon, 8 Apr 2019 12:32:40 +0200
From: Thierry Reding <thierry.reding@...il.com>
To: Douglas Anderson <dianders@...omium.org>
Cc: Heiko Stuebner <heiko@...ech.de>,
Sean Paul <seanpaul@...omium.org>,
linux-rockchip@...ts.infradead.org,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
dri-devel@...ts.freedesktop.org,
Boris Brezillon <boris.brezillon@...labora.com>,
Ezequiel Garcia <ezequiel@...labora.com>,
Enric Balletbò <enric.balletbo@...labora.com>,
Rob Herring <robh+dt@...nel.org>, mka@...omium.org,
Eric Anholt <eric@...olt.net>,
Jeffy Chen <jeffy.chen@...k-chips.com>,
Stéphane Marchesin <marcheu@...omium.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
David Airlie <airlied@...ux.ie>,
Mark Rutland <mark.rutland@....com>,
Daniel Vetter <daniel@...ll.ch>
Subject: Re: [PATCH v5 1/7] dt-bindings: Add panel-timing subnode to
simple-panel
On Mon, Apr 01, 2019 at 10:17:18AM -0700, Douglas Anderson wrote:
> From: Sean Paul <seanpaul@...omium.org>
>
> This patch adds a new subnode to simple-panel allowing us to override
> the typical timing expressed in the panel's display_timing.
>
> Changes in v2:
> - Split out the binding into a new patch (Rob)
> - display-timings is a new section (Rob)
> - Use the full display-timings subnode instead of picking the timing
> out (Rob/Thierry)
> Changes in v3:
> - Go back to using the timing subnode directly, but rename to
> panel-timing (Rob)
> Changes in v4:
> - Simplify desc. for when override should be used (Thierry/Laurent)
> - Removed Rob H review since it's been a year and wording changed
> Changes in v5:
> - Removed bit about OS may ignore (Rob/Ezequiel)
>
> Cc: Doug Anderson <dianders@...omium.org>
> Cc: Eric Anholt <eric@...olt.net>
> Cc: Heiko Stuebner <heiko@...ech.de>
> Cc: Jeffy Chen <jeffy.chen@...k-chips.com>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: Stéphane Marchesin <marcheu@...omium.org>
> Cc: Thierry Reding <thierry.reding@...il.com>
> Cc: devicetree@...r.kernel.org
> Cc: dri-devel@...ts.freedesktop.org
> Cc: linux-rockchip@...ts.infradead.org
> Signed-off-by: Sean Paul <seanpaul@...omium.org>
> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> ---
>
> .../bindings/display/panel/simple-panel.txt | 22 +++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
> index b2b872c710f2..93882268c0b9 100644
> --- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
> +++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
> @@ -15,6 +15,16 @@ Optional properties:
> (hot plug detect) signal, but the signal isn't hooked up so we should
> hardcode the max delay from the panel spec when powering up the panel.
>
> +panel-timing subnode
Is there any reason why we need the panel- prefix? This is already part
of a panel definition, so it's completely redundant. Why not just name
the subnode "timing"?
Thierry
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists