[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CADRPPNR0VqCZvyRvdTRAeNYWX5qgVTGrhDab5Y=mR9r9UJy-4w@mail.gmail.com>
Date: Mon, 8 Apr 2019 15:15:48 -0500
From: Li Yang <leoyang.li@....com>
To: Ioana Ciornei <ioana.ciornei@....com>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Roy Pledge <roy.pledge@....com>
Subject: Re: [PATCH v2] soc: fsl: add DPAA2 console support
On Fri, Apr 5, 2019 at 4:51 AM Ioana Ciornei <ioana.ciornei@....com> wrote:
>
> This patch adds DPAA2 MC and AIOP console log support.
>
> The platform driver probes on the "fsl,dpaa2-console" device tree node
> which describes the base firmware address needed in order to infer the
> start address of both firmware logs: MC and AIOP.
> It then exports two misc char devices which can be used to dump
> the needed logs.
>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@....com>
> Signed-off-by: Roy Pledge <roy.pledge@....com>
Applied to soc-fsl for next. Thanks.
> ---
> Changes in v2:
> - adjust the COMPILE_TEST dependencies
> - remove the duplicate "dpaa2-console" print prefix
> - move driver description and author at the bottom
> - do not leak 'cd' structure in _open
>
> drivers/soc/fsl/Kconfig | 10 ++
> drivers/soc/fsl/Makefile | 1 +
> drivers/soc/fsl/dpaa2-console.c | 312 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 323 insertions(+)
> create mode 100644 drivers/soc/fsl/dpaa2-console.c
>
> diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
> index 61f8e1433d0a..b6804c04e96f 100644
> --- a/drivers/soc/fsl/Kconfig
> +++ b/drivers/soc/fsl/Kconfig
> @@ -29,4 +29,14 @@ config FSL_MC_DPIO
> other DPAA2 objects. This driver does not expose the DPIO
> objects individually, but groups them under a service layer
> API.
> +
> +config DPAA2_CONSOLE
> + tristate "QorIQ DPAA2 console driver"
> + depends on OF && (ARCH_LAYERSCAPE || COMPILE_TEST)
> + default y
> + help
> + Console driver for DPAA2 platforms. Exports 2 char devices,
> + /dev/dpaa2_mc_console and /dev/dpaa2_aiop_console,
> + which can be used to dump the Management Complex and AIOP
> + firmware logs.
> endmenu
> diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
> index 803ef1bfb5ff..57762c9fc7da 100644
> --- a/drivers/soc/fsl/Makefile
> +++ b/drivers/soc/fsl/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_QUICC_ENGINE) += qe/
> obj-$(CONFIG_CPM) += qe/
> obj-$(CONFIG_FSL_GUTS) += guts.o
> obj-$(CONFIG_FSL_MC_DPIO) += dpio/
> +obj-$(CONFIG_DPAA2_CONSOLE) += dpaa2-console.o
> diff --git a/drivers/soc/fsl/dpaa2-console.c b/drivers/soc/fsl/dpaa2-console.c
> new file mode 100644
> index 000000000000..37e582e818d3
> --- /dev/null
> +++ b/drivers/soc/fsl/dpaa2-console.c
> @@ -0,0 +1,312 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Freescale DPAA2 Platforms Console Driver
> + *
> + * Copyright 2015-2016 Freescale Semiconductor Inc.
> + * Copyright 2018 NXP
> + */
> +
> +#define pr_fmt(fmt) "dpaa2-console: " fmt
> +
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/miscdevice.h>
> +#include <linux/uaccess.h>
> +#include <linux/slab.h>
> +#include <linux/fs.h>
> +#include <linux/io.h>
> +
> +/* MC firmware base low/high registers indexes */
> +#define MCFBALR_OFFSET 0
> +#define MCFBAHR_OFFSET 1
> +
> +/* Bit masks used to get the most/least significant part of the MC base addr */
> +#define MC_FW_ADDR_MASK_HIGH 0x1FFFF
> +#define MC_FW_ADDR_MASK_LOW 0xE0000000
> +
> +#define MC_BUFFER_OFFSET 0x01000000
> +#define MC_BUFFER_SIZE (1024 * 1024 * 16)
> +#define MC_OFFSET_DELTA MC_BUFFER_OFFSET
> +
> +#define AIOP_BUFFER_OFFSET 0x06000000
> +#define AIOP_BUFFER_SIZE (1024 * 1024 * 16)
> +#define AIOP_OFFSET_DELTA 0
> +
> +#define LOG_HEADER_FLAG_BUFFER_WRAPAROUND 0x80000000
> +#define LAST_BYTE(a) ((a) & ~(LOG_HEADER_FLAG_BUFFER_WRAPAROUND))
> +
> +/* MC and AIOP Magic words */
> +#define MAGIC_MC 0x4d430100
> +#define MAGIC_AIOP 0x41494F50
> +
> +struct log_header {
> + __le32 magic_word;
> + char reserved[4];
> + __le32 buf_start;
> + __le32 buf_length;
> + __le32 last_byte;
> +};
> +
> +struct console_data {
> + char *map_addr;
> + struct log_header *hdr;
> + char *start_addr;
> + char *end_addr;
> + char *end_of_data;
> + char *cur_ptr;
> +};
> +
> +struct resource mc_base_addr;
> +
> +static inline void adjust_end(struct console_data *cd)
> +{
> + u32 last_byte = readl(&cd->hdr->last_byte);
> +
> + cd->end_of_data = cd->start_addr + LAST_BYTE(last_byte);
> +}
> +
> +static u64 get_mc_fw_base_address(void)
> +{
> + u64 mcfwbase = 0ULL;
> + u32 *mcfbaregs;
> +
> + mcfbaregs = (u32 *)ioremap(mc_base_addr.start,
> + resource_size(&mc_base_addr));
> + if (!mcfbaregs) {
> + pr_err("could not map MC Firmaware Base registers\n");
> + return -EIO;
> + }
> +
> + mcfwbase = readl(mcfbaregs + MCFBAHR_OFFSET) & MC_FW_ADDR_MASK_HIGH;
> + mcfwbase <<= 32;
> + mcfwbase |= readl(mcfbaregs + MCFBALR_OFFSET) & MC_FW_ADDR_MASK_LOW;
> + iounmap(mcfbaregs);
> +
> + pr_debug("MC base address at 0x%016llx\n", mcfwbase);
> + return mcfwbase;
> +}
> +
> +static ssize_t dpaa2_console_size(struct console_data *cd)
> +{
> + ssize_t size;
> +
> + if (cd->cur_ptr <= cd->end_of_data)
> + size = cd->end_of_data - cd->cur_ptr;
> + else
> + size = (cd->end_addr - cd->cur_ptr) +
> + (cd->end_of_data - cd->start_addr);
> +
> + return size;
> +}
> +
> +static int dpaa2_generic_console_open(struct inode *node, struct file *fp,
> + u64 offset, u64 size,
> + u32 expected_magic,
> + u32 offset_delta)
> +{
> + u32 read_magic, wrapped, last_byte, buf_start, buf_length;
> + struct console_data *cd;
> + u64 base_addr;
> + int err;
> +
> + cd = kmalloc(sizeof(*cd), GFP_KERNEL);
> + if (!cd)
> + return -ENOMEM;
> +
> + base_addr = get_mc_fw_base_address();
> + if (base_addr < 0) {
> + err = -EIO;
> + goto err_fwba;
> + }
> +
> + cd->map_addr = ioremap(base_addr + offset, size);
> + if (!cd->map_addr) {
> + pr_err("cannot map console log memory\n");
> + err = -EIO;
> + goto err_ioremap;
> + }
> +
> + cd->hdr = (struct log_header *)cd->map_addr;
> + read_magic = readl(&cd->hdr->magic_word);
> + last_byte = readl(&cd->hdr->last_byte);
> + buf_start = readl(&cd->hdr->buf_start);
> + buf_length = readl(&cd->hdr->buf_length);
> +
> + if (read_magic != expected_magic) {
> + pr_warn("expected = %08x, read = %08x\n",
> + expected_magic, read_magic);
> + err = -EIO;
> + goto err_magic;
> + }
> +
> + cd->start_addr = cd->map_addr + buf_start - offset_delta;
> + cd->end_addr = cd->start_addr + buf_length;
> +
> + wrapped = last_byte & LOG_HEADER_FLAG_BUFFER_WRAPAROUND;
> +
> + adjust_end(cd);
> + if (wrapped && cd->end_of_data != cd->end_addr)
> + cd->cur_ptr = cd->end_of_data + 1;
> + else
> + cd->cur_ptr = cd->start_addr;
> +
> + fp->private_data = cd;
> +
> + return 0;
> +
> +err_magic:
> + iounmap(cd->map_addr);
> +
> +err_ioremap:
> +err_fwba:
> + kfree(cd);
> +
> + return err;
> +}
> +
> +static int dpaa2_mc_console_open(struct inode *node, struct file *fp)
> +{
> + return dpaa2_generic_console_open(node, fp,
> + MC_BUFFER_OFFSET, MC_BUFFER_SIZE,
> + MAGIC_MC, MC_OFFSET_DELTA);
> +}
> +
> +static int dpaa2_aiop_console_open(struct inode *node, struct file *fp)
> +{
> + return dpaa2_generic_console_open(node, fp,
> + AIOP_BUFFER_OFFSET, AIOP_BUFFER_SIZE,
> + MAGIC_AIOP, AIOP_OFFSET_DELTA);
> +}
> +
> +static int dpaa2_console_close(struct inode *node, struct file *fp)
> +{
> + struct console_data *cd = fp->private_data;
> +
> + iounmap(cd->map_addr);
> + kfree(cd);
> + return 0;
> +}
> +
> +static ssize_t dpaa2_console_read(struct file *fp, char __user *buf,
> + size_t count, loff_t *f_pos)
> +{
> + struct console_data *cd = fp->private_data;
> + size_t bytes = dpaa2_console_size(cd);
> + size_t bytes_end = cd->end_addr - cd->cur_ptr;
> + size_t written = 0;
> +
> + /* Check if we need to adjust the end of data addr */
> + adjust_end(cd);
> +
> + if (cd->end_of_data == cd->cur_ptr)
> + return 0;
> +
> + if (count < bytes)
> + bytes = count;
> +
> + if (bytes > bytes_end) {
> + if (copy_to_user(buf, cd->cur_ptr, bytes_end))
> + return -EFAULT;
> + buf += bytes_end;
> + cd->cur_ptr = cd->start_addr;
> + bytes -= bytes_end;
> + written += bytes_end;
> + }
> +
> + if (copy_to_user(buf, cd->cur_ptr, bytes))
> + return -EFAULT;
> + cd->cur_ptr += bytes;
> + written += bytes;
> +
> + return written;
> +}
> +
> +static const struct file_operations dpaa2_mc_console_fops = {
> + .owner = THIS_MODULE,
> + .open = dpaa2_mc_console_open,
> + .release = dpaa2_console_close,
> + .read = dpaa2_console_read,
> +};
> +
> +static struct miscdevice dpaa2_mc_console_dev = {
> + .minor = MISC_DYNAMIC_MINOR,
> + .name = "dpaa2_mc_console",
> + .fops = &dpaa2_mc_console_fops
> +};
> +
> +static const struct file_operations dpaa2_aiop_console_fops = {
> + .owner = THIS_MODULE,
> + .open = dpaa2_aiop_console_open,
> + .release = dpaa2_console_close,
> + .read = dpaa2_console_read,
> +};
> +
> +static struct miscdevice dpaa2_aiop_console_dev = {
> + .minor = MISC_DYNAMIC_MINOR,
> + .name = "dpaa2_aiop_console",
> + .fops = &dpaa2_aiop_console_fops
> +};
> +
> +static int dpaa2_console_probe(struct platform_device *pdev)
> +{
> + int error;
> +
> + error = of_address_to_resource(pdev->dev.of_node, 0, &mc_base_addr);
> + if (error < 0) {
> + pr_err("of_address_to_resource() failed for %pOF with %d\n",
> + pdev->dev.of_node, error);
> + return error;
> + }
> +
> + error = misc_register(&dpaa2_mc_console_dev);
> + if (error) {
> + pr_err("cannot register device %s\n",
> + dpaa2_mc_console_dev.name);
> + goto err_register_mc;
> + }
> +
> + error = misc_register(&dpaa2_aiop_console_dev);
> + if (error) {
> + pr_err("cannot register device %s\n",
> + dpaa2_aiop_console_dev.name);
> + goto err_register_aiop;
> + }
> +
> + return 0;
> +
> +err_register_aiop:
> + misc_deregister(&dpaa2_mc_console_dev);
> +err_register_mc:
> + return error;
> +}
> +
> +static int dpaa2_console_remove(struct platform_device *pdev)
> +{
> + misc_deregister(&dpaa2_mc_console_dev);
> + misc_deregister(&dpaa2_aiop_console_dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id dpaa2_console_match_table[] = {
> + { .compatible = "fsl,dpaa2-console",},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, dpaa2_console_match_table);
> +
> +static struct platform_driver dpaa2_console_driver = {
> + .driver = {
> + .name = "dpaa2-console",
> + .pm = NULL,
> + .of_match_table = dpaa2_console_match_table,
> + },
> + .probe = dpaa2_console_probe,
> + .remove = dpaa2_console_remove,
> +};
> +module_platform_driver(dpaa2_console_driver);
> +
> +MODULE_LICENSE("Dual BSD/GPL");
> +MODULE_AUTHOR("Roy Pledge <roy.pledge@....com>");
> +MODULE_DESCRIPTION("DPAA2 console driver");
> --
> 1.9.1
>
Powered by blists - more mailing lists