[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1554785675-8090-3-git-send-email-Anson.Huang@nxp.com>
Date: Tue, 9 Apr 2019 05:00:01 +0000
From: Anson Huang <anson.huang@....com>
To: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"a.zummo@...ertech.it" <a.zummo@...ertech.it>,
"alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
Aisheng Dong <aisheng.dong@....com>,
"ulf.hansson@...aro.org" <ulf.hansson@...aro.org>,
"sboyd@...nel.org" <sboyd@...nel.org>, Peng Fan <peng.fan@....com>,
Daniel Baluta <daniel.baluta@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-rtc@...r.kernel.org" <linux-rtc@...r.kernel.org>
CC: dl-linux-imx <linux-imx@....com>
Subject: [PATCH V7 3/4] arm64: dts: freescale: imx8qxp: enable scu general irq
channel
On i.MX8QXP, SCU uses MU1 general interrupt channel #3 to notify
user for IRQs of RTC alarm, thermal alarm and WDOG etc., mailbox
RX doorbell mode is used for this function, this patch adds
support for it.
Signed-off-by: Anson Huang <Anson.Huang@....com>
Reviewed-by: Dong Aisheng <aisheng.dong@....com>
---
No changes.
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 0cb9398..70ef3db 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -21,6 +21,7 @@
mmc1 = &usdhc2;
mmc2 = &usdhc3;
serial0 = &adma_lpuart0;
+ mu1 = &lsio_mu1;
};
cpus {
@@ -117,7 +118,8 @@
scu {
compatible = "fsl,imx-scu";
mbox-names = "tx0", "tx1", "tx2", "tx3",
- "rx0", "rx1", "rx2", "rx3";
+ "rx0", "rx1", "rx2", "rx3",
+ "gip3";
mboxes = <&lsio_mu1 0 0
&lsio_mu1 0 1
&lsio_mu1 0 2
@@ -125,7 +127,8 @@
&lsio_mu1 1 0
&lsio_mu1 1 1
&lsio_mu1 1 2
- &lsio_mu1 1 3>;
+ &lsio_mu1 1 3
+ &lsio_mu1 3 3>;
clk: clock-controller {
compatible = "fsl,imx8qxp-clk";
--
2.7.4
Powered by blists - more mailing lists