[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <6398556a755a19cde69d4185d34b09c985c79bc0.1554923967.git.mchehab+samsung@kernel.org>
Date: Wed, 10 Apr 2019 16:22:43 -0300
From: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>
To: Linux Doc Mailing List <linux-doc@...r.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Mauro Carvalho Chehab <mchehab@...radead.org>,
linux-kernel@...r.kernel.org, Jonathan Corbet <corbet@....net>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>, linux-hwmon@...r.kernel.org
Subject: [PATCH v2 06/21] docs: hwmon: pc87360: convert to ReST format
Convert pc87360 to ReST format, in order to allow it to
be parsed by Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>
---
Documentation/hwmon/pc87360 | 38 +++++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 12 deletions(-)
diff --git a/Documentation/hwmon/pc87360 b/Documentation/hwmon/pc87360
index d5f5cf16ce59..4bad07bce54b 100644
--- a/Documentation/hwmon/pc87360
+++ b/Documentation/hwmon/pc87360
@@ -2,14 +2,19 @@ Kernel driver pc87360
=====================
Supported chips:
+
* National Semiconductor PC87360, PC87363, PC87364, PC87365 and PC87366
+
Prefixes: 'pc87360', 'pc87363', 'pc87364', 'pc87365', 'pc87366'
+
Addresses scanned: none, address read from Super I/O config space
+
Datasheets: No longer available
Authors: Jean Delvare <jdelvare@...e.de>
Thanks to Sandeep Mehta, Tonko de Rooy and Daniel Ceregatti for testing.
+
Thanks to Rudolf Marek for helping me investigate conversion issues.
@@ -17,11 +22,13 @@ Module Parameters
-----------------
* init int
- Chip initialization level:
- 0: None
- *1: Forcibly enable internal voltage and temperature channels, except in9
- 2: Forcibly enable all voltage and temperature channels, except in9
- 3: Forcibly enable all voltage and temperature channels, including in9
+ Chip initialization level:
+
+ - 0: None
+ - **1**: Forcibly enable internal voltage and temperature channels,
+ except in9
+ - 2: Forcibly enable all voltage and temperature channels, except in9
+ - 3: Forcibly enable all voltage and temperature channels, including in9
Note that this parameter has no effect for the PC87360, PC87363 and PC87364
chips.
@@ -43,13 +50,15 @@ hardware monitoring chipsets, not only controlling and monitoring three fans,
but also monitoring eleven voltage inputs and two (PC87365) or up to four
(PC87366) temperatures.
+ =========== ======= ======= ======= ======= =====
Chip #vin #fan #pwm #temp devid
-
+ =========== ======= ======= ======= ======= =====
PC87360 - 2 2 - 0xE1
PC87363 - 2 2 - 0xE8
PC87364 - 3 3 - 0xE4
PC87365 11 3 3 2 0xE5
PC87366 11 3 3 3-4 0xE9
+ =========== ======= ======= ======= ======= =====
The driver assumes that no more than one chip is present, and one of the
standard Super I/O addresses is used (0x2E/0x2F or 0x4E/0x4F)
@@ -68,18 +77,23 @@ have to care no more.
For reference, here are a few values about clock dividers:
- slowest accuracy highest
- measurable around 3000 accurate
+ =========== =============== =============== ===========
+ slowest accuracy highest
+ measurable around 3000 accurate
divider speed (RPM) RPM (RPM) speed (RPM)
- 1 1882 18 6928
- 2 941 37 4898
- 4 470 74 3464
- 8 235 150 2449
+ =========== =============== =============== ===========
+ 1 1882 18 6928
+ 2 941 37 4898
+ 4 470 74 3464
+ 8 235 150 2449
+ =========== =============== =============== ===========
For the curious, here is how the values above were computed:
+
* slowest measurable speed: clock/(255*divider)
* accuracy around 3000 RPM: 3000^2/clock
* highest accurate speed: sqrt(clock*100)
+
The clock speed for the PC87360 family is 480 kHz. I arbitrarily chose 100
RPM as the lowest acceptable accuracy.
--
2.20.1
Powered by blists - more mailing lists