| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <bc9909afa34d4e8de8ee524ec5b7ffc1e5affbaf.1554923967.git.mchehab+samsung@kernel.org>
Date: Wed, 10 Apr 2019 16:22:45 -0300
From: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>
To: Linux Doc Mailing List <linux-doc@...r.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Mauro Carvalho Chehab <mchehab@...radead.org>,
linux-kernel@...r.kernel.org, Jonathan Corbet <corbet@....net>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>, linux-hwmon@...r.kernel.org
Subject: [PATCH v2 08/21] docs: hwmon: w83791d: convert to ReST format
Convert w83791d to ReST format, in order to allow it to
be parsed by Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>
---
Documentation/hwmon/w83791d | 123 +++++++++++++++++++++---------------
1 file changed, 71 insertions(+), 52 deletions(-)
diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d
index f4021a285460..a91f9e5fb0c6 100644
--- a/Documentation/hwmon/w83791d
+++ b/Documentation/hwmon/w83791d
@@ -2,9 +2,13 @@ Kernel driver w83791d
=====================
Supported chips:
+
* Winbond W83791D
+
Prefix: 'w83791d'
+
Addresses scanned: I2C 0x2c - 0x2f
+
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791D_W83791Gb.pdf
Author: Charles Spirakis <bezaur@...il.com>
@@ -12,39 +16,46 @@ Author: Charles Spirakis <bezaur@...il.com>
This driver was derived from the w83781d.c and w83792d.c source files.
Credits:
+
w83781d.c:
- Frodo Looijaard <frodol@....nl>,
- Philip Edelbrock <phil@...roedge.com>,
- and Mark Studebaker <mdsxyz123@...oo.com>
+
+ - Frodo Looijaard <frodol@....nl>,
+ - Philip Edelbrock <phil@...roedge.com>,
+ - Mark Studebaker <mdsxyz123@...oo.com>
+
w83792d.c:
- Shane Huang (Winbond),
- Rudolf Marek <r.marek@...embler.cz>
+
+ - Shane Huang (Winbond),
+ - Rudolf Marek <r.marek@...embler.cz>
Additional contributors:
- Sven Anders <anders@...uras.de>
- Marc Hulsman <m.hulsman@...elft.nl>
+
+ - Sven Anders <anders@...uras.de>
+ - Marc Hulsman <m.hulsman@...elft.nl>
Module Parameters
-----------------
* init boolean
- (default 0)
- Use 'init=1' to have the driver do extra software initializations.
- The default behavior is to do the minimum initialization possible
- and depend on the BIOS to properly setup the chip. If you know you
- have a w83791d and you're having problems, try init=1 before trying
- reset=1.
+ (default 0)
+
+ Use 'init=1' to have the driver do extra software initializations.
+ The default behavior is to do the minimum initialization possible
+ and depend on the BIOS to properly setup the chip. If you know you
+ have a w83791d and you're having problems, try init=1 before trying
+ reset=1.
* reset boolean
- (default 0)
- Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
- behavior is no chip reset to preserve BIOS settings.
+ (default 0)
+
+ Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
+ behavior is no chip reset to preserve BIOS settings.
* force_subclients=bus,caddr,saddr,saddr
- This is used to force the i2c addresses for subclients of
- a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b'
- to force the subclients of chip 0x2f on bus 0 to i2c addresses
- 0x4a and 0x4b.
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b`
+ to force the subclients of chip 0x2f on bus 0 to i2c addresses
+ 0x4a and 0x4b.
Description
@@ -91,11 +102,11 @@ This file is used for both legacy and new code.
The sysfs interface to the beep bitmask has migrated from the original legacy
method of a single sysfs beep_mask file to a newer method using multiple
-*_beep files as described in .../Documentation/hwmon/sysfs-interface.
+`*_beep` files as described in `Documentation/hwmon/sysfs-interface`.
A similar change has occurred for the bitmap corresponding to the alarms. The
original legacy method used a single sysfs alarms file containing a bitmap
-of triggered alarms. The newer method uses multiple sysfs *_alarm files
+of triggered alarms. The newer method uses multiple sysfs `*_alarm` files
(again following the pattern described in sysfs-interface).
Since both methods read and write the underlying hardware, they can be used
@@ -116,46 +127,54 @@ User mode code requesting values more often will receive cached values.
The sysfs-interface is documented in the 'sysfs-interface' file. Only
chip-specific options are documented here.
-pwm[1-3]_enable - this file controls mode of fan/temperature control for
+======================= =======================================================
+pwm[1-3]_enable this file controls mode of fan/temperature control for
fan 1-3. Fan/PWM 4-5 only support manual mode.
- * 1 Manual mode
- * 2 Thermal Cruise mode
- * 3 Fan Speed Cruise mode (no further support)
-temp[1-3]_target - defines the target temperature for Thermal Cruise mode.
+ * 1 Manual mode
+ * 2 Thermal Cruise mode
+ * 3 Fan Speed Cruise mode (no further support)
+
+temp[1-3]_target defines the target temperature for Thermal Cruise mode.
Unit: millidegree Celsius
RW
-temp[1-3]_tolerance - temperature tolerance for Thermal Cruise mode.
+temp[1-3]_tolerance temperature tolerance for Thermal Cruise mode.
Specifies an interval around the target temperature
in which the fan speed is not changed.
Unit: millidegree Celsius
RW
+======================= =======================================================
Alarms bitmap vs. beep_mask bitmask
-------------------------------------
+-----------------------------------
+
For legacy code using the alarms and beep_mask files:
-in0 (VCORE) : alarms: 0x000001 beep_mask: 0x000001
-in1 (VINR0) : alarms: 0x000002 beep_mask: 0x002000 <== mismatch
-in2 (+3.3VIN): alarms: 0x000004 beep_mask: 0x000004
-in3 (5VDD) : alarms: 0x000008 beep_mask: 0x000008
-in4 (+12VIN) : alarms: 0x000100 beep_mask: 0x000100
-in5 (-12VIN) : alarms: 0x000200 beep_mask: 0x000200
-in6 (-5VIN) : alarms: 0x000400 beep_mask: 0x000400
-in7 (VSB) : alarms: 0x080000 beep_mask: 0x010000 <== mismatch
-in8 (VBAT) : alarms: 0x100000 beep_mask: 0x020000 <== mismatch
-in9 (VINR1) : alarms: 0x004000 beep_mask: 0x004000
-temp1 : alarms: 0x000010 beep_mask: 0x000010
-temp2 : alarms: 0x000020 beep_mask: 0x000020
-temp3 : alarms: 0x002000 beep_mask: 0x000002 <== mismatch
-fan1 : alarms: 0x000040 beep_mask: 0x000040
-fan2 : alarms: 0x000080 beep_mask: 0x000080
-fan3 : alarms: 0x000800 beep_mask: 0x000800
-fan4 : alarms: 0x200000 beep_mask: 0x200000
-fan5 : alarms: 0x400000 beep_mask: 0x400000
-tart1 : alarms: 0x010000 beep_mask: 0x040000 <== mismatch
-tart2 : alarms: 0x020000 beep_mask: 0x080000 <== mismatch
-tart3 : alarms: 0x040000 beep_mask: 0x100000 <== mismatch
-case_open : alarms: 0x001000 beep_mask: 0x001000
-global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable)
+============= ======== ========= ==========================
+Signal Alarms beep_mask Obs
+============= ======== ========= ==========================
+in0 (VCORE) 0x000001 0x000001
+in1 (VINR0) 0x000002 0x002000 <== mismatch
+in2 (+3.3VIN) 0x000004 0x000004
+in3 (5VDD) 0x000008 0x000008
+in4 (+12VIN) 0x000100 0x000100
+in5 (-12VIN) 0x000200 0x000200
+in6 (-5VIN) 0x000400 0x000400
+in7 (VSB) 0x080000 0x010000 <== mismatch
+in8 (VBAT) 0x100000 0x020000 <== mismatch
+in9 (VINR1) 0x004000 0x004000
+temp1 0x000010 0x000010
+temp2 0x000020 0x000020
+temp3 0x002000 0x000002 <== mismatch
+fan1 0x000040 0x000040
+fan2 0x000080 0x000080
+fan3 0x000800 0x000800
+fan4 0x200000 0x200000
+fan5 0x400000 0x400000
+tart1 0x010000 0x040000 <== mismatch
+tart2 0x020000 0x080000 <== mismatch
+tart3 0x040000 0x100000 <== mismatch
+case_open 0x001000 0x001000
+global_enable - 0x800000 (modified via beep_enable)
+============= ======== ========= ==========================
--
2.20.1
Powered by blists - more mailing lists