| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1554883239-12051-1-git-send-email-erwan.leray@st.com>
Date: Wed, 10 Apr 2019 10:00:39 +0200
From: Erwan Le Ray <erwan.leray@...com>
To: Olof Johansson <olof@...om.net>, Arnd Bergmann <arnd@...db.de>,
"Kevin Hilman" <khilman@...libre.com>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Russell King <linux@...linux.org.uk>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Clement Peron <clement.peron@...ialet.com>,
Simon Horman <horms+renesas@...ge.net.au>,
Stefan Agner <stefan@...er.ch>,
Biju Das <biju.das@...renesas.com>,
"Gerald Baeza" <gerald.baeza@...com>,
Uwe Kleine-Koenig <u.kleine-koenig@...gutronix.de>,
Erwan Le Ray <erwan.leray@...com>,
"Clement Peron" <peron.clem@...il.com>,
Bich Hemon <bich.hemon@...com>,
Fabrice Gasnier <fabrice.gasnier@...com>
Subject: [PATCH] ARM: debug: stm32: add UART early console configuration
- This patch allows to configure UART instance for early console by setting
physical and virtual base addresses.
- This patch adds UART early console support for stm32h7 and stm32mp157c.
Signed-off-by: Erwan Le Ray <erwan.leray@...com>
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 6d6e033..4ea3e17 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1201,23 +1201,49 @@ choice
config STM32F4_DEBUG_UART
bool "Use STM32F4 UART for low-level debug"
- depends on ARCH_STM32
+ depends on MACH_STM32F429 || MACH_STM32F469
select DEBUG_STM32_UART
help
Say Y here if you want kernel low-level debugging support
on STM32F4 based platforms, which default UART is wired on
- USART1.
+ USART1, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS.
If unsure, say N.
config STM32F7_DEBUG_UART
bool "Use STM32F7 UART for low-level debug"
- depends on ARCH_STM32
+ depends on MACH_STM32F746 || MACH_STM32F769
select DEBUG_STM32_UART
help
Say Y here if you want kernel low-level debugging support
on STM32F7 based platforms, which default UART is wired on
- USART1.
+ USART1, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS.
+
+ If unsure, say N.
+
+ config STM32H7_DEBUG_UART
+ bool "Use STM32H7 UART for low-level debug"
+ depends on MACH_STM32H743
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STM32H7 based platforms, which default UART is wired on
+ USART1, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS.
+
+ If unsure, say N.
+
+ config STM32MP1_DEBUG_UART
+ bool "Use STM32MP1 UART for low-level debug"
+ depends on MACH_STM32MP157
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STM32MP1 based platforms, wich default UART is wired on
+ UART4, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
If unsure, say N.
@@ -1622,6 +1648,9 @@ config DEBUG_UART_PHYS
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x3f201000 if DEBUG_BCM2836
default 0x4000e400 if DEBUG_LL_UART_EFM32
+ default 0x40010000 if STM32MP1_DEBUG_UART
+ default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
+ STM32H7_DEBUG_UART
default 0x40028000 if DEBUG_AT91_SAMV7_USART1
default 0x40081000 if DEBUG_LPC18XX_UART0
default 0x40090000 if DEBUG_LPC32XX
@@ -1716,7 +1745,7 @@ config DEBUG_UART_PHYS
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
- DEBUG_AT91_UART
+ DEBUG_AT91_UART || DEBUG_STM32_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
@@ -1784,6 +1813,7 @@ config DEBUG_UART_VIRT
default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE
+ default 0xfe010000 if STM32MP1_DEBUG_UART
default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
@@ -1832,7 +1862,7 @@ config DEBUG_UART_VIRT
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
- DEBUG_AT91_UART
+ DEBUG_AT91_UART || DEBUG_STM32_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S
index 1abb32f..6446e46 100644
--- a/arch/arm/include/debug/stm32.S
+++ b/arch/arm/include/debug/stm32.S
@@ -4,14 +4,13 @@
* Author: Gerald Baeza <gerald.baeza@...com> for STMicroelectronics.
*/
-#define STM32_UART_BASE 0x40011000 /* USART1 */
-
#ifdef CONFIG_STM32F4_DEBUG_UART
#define STM32_USART_SR_OFF 0x00
#define STM32_USART_TDR_OFF 0x04
#endif
-#ifdef CONFIG_STM32F7_DEBUG_UART
+#if defined(CONFIG_STM32F7_DEBUG_UART) || (CONFIG_STM32H7_DEBUG_UART) || \
+ defined(CONFIG_STM32MP1_DEBUG_UART)
#define STM32_USART_SR_OFF 0x1C
#define STM32_USART_TDR_OFF 0x28
#endif
@@ -20,8 +19,8 @@
#define STM32_USART_TXE (1 << 7) /* Tx data reg empty */
.macro addruart, rp, rv, tmp
- ldr \rp, =STM32_UART_BASE @ physical base
- ldr \rv, =STM32_UART_BASE @ virt base /* NoMMU */
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical base
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virt base
.endm
.macro senduart,rd,rx
--
1.9.1
Powered by blists - more mailing lists