| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190410122647.CBE451128ED2@debutante.sirena.org.uk>
Date: Wed, 10 Apr 2019 13:26:47 +0100 (BST)
From: Mark Brown <broonie@...nel.org>
To: Olivier Moysan <olivier.moysan@...com>
Cc: alexandre.torgue@...com, alsa-devel@...a-project.org,
arnaud.pouliquen@...com, benjamin.gaignard@...com,
broonie@...nel.org, lgirdwood@...il.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
Mark Brown <broonie@...nel.org>, mcoquelin.stm32@...il.com,
olivier.moysan@...com, perex@...ex.cz, tiwai@...e.com
Subject: Applied "ASoC: stm32: sai: fix master clock management" to the asoc tree
The patch
ASoC: stm32: sai: fix master clock management
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From e37c2deafe7058cf7989c4c47bbf1140cc867d89 Mon Sep 17 00:00:00 2001
From: Olivier Moysan <olivier.moysan@...com>
Date: Wed, 10 Apr 2019 10:08:36 +0200
Subject: [PATCH] ASoC: stm32: sai: fix master clock management
When master clock is used, master clock rate is set exclusively.
Parent clocks of master clock cannot be changed after a call to
clk_set_rate_exclusive(). So the parent clock of SAI kernel clock
must be set before.
Ensure also that exclusive rate operations are balanced
in STM32 SAI driver.
Signed-off-by: Olivier Moysan <olivier.moysan@...com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
sound/soc/stm/stm32_sai_sub.c | 64 +++++++++++++++++++++++++----------
1 file changed, 47 insertions(+), 17 deletions(-)
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index 83d8a7ac56f4..d7045aa520de 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -70,6 +70,7 @@
#define SAI_IEC60958_STATUS_BYTES 24
#define SAI_MCLK_NAME_LEN 32
+#define SAI_RATE_11K 11025
/**
* struct stm32_sai_sub_data - private data of SAI sub block (block A or B)
@@ -309,6 +310,25 @@ static int stm32_sai_set_clk_div(struct stm32_sai_sub_data *sai,
return ret;
}
+static int stm32_sai_set_parent_clock(struct stm32_sai_sub_data *sai,
+ unsigned int rate)
+{
+ struct platform_device *pdev = sai->pdev;
+ struct clk *parent_clk = sai->pdata->clk_x8k;
+ int ret;
+
+ if (!(rate % SAI_RATE_11K))
+ parent_clk = sai->pdata->clk_x11k;
+
+ ret = clk_set_parent(sai->sai_ck, parent_clk);
+ if (ret)
+ dev_err(&pdev->dev, " Error %d setting sai_ck parent clock. %s",
+ ret, ret == -EBUSY ?
+ "Active stream rates conflict\n" : "\n");
+
+ return ret;
+}
+
static long stm32_sai_mclk_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
@@ -490,25 +510,29 @@ static int stm32_sai_set_sysclk(struct snd_soc_dai *cpu_dai,
struct stm32_sai_sub_data *sai = snd_soc_dai_get_drvdata(cpu_dai);
int ret;
- if (dir == SND_SOC_CLOCK_OUT) {
+ if (dir == SND_SOC_CLOCK_OUT && sai->sai_mclk) {
ret = regmap_update_bits(sai->regmap, STM_SAI_CR1_REGX,
SAI_XCR1_NODIV,
(unsigned int)~SAI_XCR1_NODIV);
if (ret < 0)
return ret;
- dev_dbg(cpu_dai->dev, "SAI MCLK frequency is %uHz\n", freq);
- sai->mclk_rate = freq;
+ /* If master clock is used, set parent clock now */
+ ret = stm32_sai_set_parent_clock(sai, freq);
+ if (ret)
+ return ret;
- if (sai->sai_mclk) {
- ret = clk_set_rate_exclusive(sai->sai_mclk,
- sai->mclk_rate);
- if (ret) {
- dev_err(cpu_dai->dev,
- "Could not set mclk rate\n");
- return ret;
- }
+ ret = clk_set_rate_exclusive(sai->sai_mclk, freq);
+ if (ret) {
+ dev_err(cpu_dai->dev,
+ ret == -EBUSY ?
+ "Active streams have incompatible rates" :
+ "Could not set mclk rate\n");
+ return ret;
}
+
+ dev_dbg(cpu_dai->dev, "SAI MCLK frequency is %uHz\n", freq);
+ sai->mclk_rate = freq;
}
return 0;
@@ -916,11 +940,13 @@ static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai,
int div = 0, cr1 = 0;
int sai_clk_rate, mclk_ratio, den;
unsigned int rate = params_rate(params);
+ int ret;
- if (!(rate % 11025))
- clk_set_parent(sai->sai_ck, sai->pdata->clk_x11k);
- else
- clk_set_parent(sai->sai_ck, sai->pdata->clk_x8k);
+ if (!sai->sai_mclk) {
+ ret = stm32_sai_set_parent_clock(sai, rate);
+ if (ret)
+ return ret;
+ }
sai_clk_rate = clk_get_rate(sai->sai_ck);
if (STM_SAI_IS_F4(sai->pdata)) {
@@ -1079,9 +1105,13 @@ static void stm32_sai_shutdown(struct snd_pcm_substream *substream,
regmap_update_bits(sai->regmap, STM_SAI_CR1_REGX, SAI_XCR1_NODIV,
SAI_XCR1_NODIV);
- clk_disable_unprepare(sai->sai_ck);
+ /* Release mclk rate only if rate was actually set */
+ if (sai->mclk_rate) {
+ clk_rate_exclusive_put(sai->sai_mclk);
+ sai->mclk_rate = 0;
+ }
- clk_rate_exclusive_put(sai->sai_mclk);
+ clk_disable_unprepare(sai->sai_ck);
spin_lock_irqsave(&sai->irq_lock, flags);
sai->substream = NULL;
--
2.20.1
Powered by blists - more mailing lists