lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190410143826.GA7856@lap1>
Date:   Wed, 10 Apr 2019 17:38:26 +0300
From:   Yuval Shaia <yuval.shaia@...cle.com>
To:     Cornelia Huck <cohuck@...hat.com>, pagupta@...hat.com
Cc:     Pankaj Gupta <pagupta@...hat.com>, linux-nvdimm@...ts.01.org,
        linux-kernel@...r.kernel.org,
        virtualization@...ts.linux-foundation.org, kvm@...r.kernel.org,
        linux-fsdevel@...r.kernel.org, linux-acpi@...r.kernel.org,
        qemu-devel@...gnu.org, linux-ext4@...r.kernel.org,
        linux-xfs@...r.kernel.org, dan.j.williams@...el.com,
        zwisler@...nel.org, vishal.l.verma@...el.com, dave.jiang@...el.com,
        mst@...hat.com, jasowang@...hat.com, willy@...radead.org,
        rjw@...ysocki.net, hch@...radead.org, lenb@...nel.org,
        jack@...e.cz, tytso@....edu, adilger.kernel@...ger.ca,
        darrick.wong@...cle.com, lcapitulino@...hat.com, kwolf@...hat.com,
        imammedo@...hat.com, jmoyer@...hat.com, nilal@...hat.com,
        riel@...riel.com, stefanha@...hat.com, aarcange@...hat.com,
        david@...hat.com, david@...morbit.com,
        xiaoguangrong.eric@...il.com, pbonzini@...hat.com,
        kilobyte@...band.pl
Subject: Re: [PATCH v5 2/5] virtio-pmem: Add virtio pmem driver

On Wed, Apr 10, 2019 at 02:24:26PM +0200, Cornelia Huck wrote:
> On Wed, 10 Apr 2019 09:38:22 +0530
> Pankaj Gupta <pagupta@...hat.com> wrote:
> 
> > This patch adds virtio-pmem driver for KVM guest.
> > 
> > Guest reads the persistent memory range information from
> > Qemu over VIRTIO and registers it on nvdimm_bus. It also
> > creates a nd_region object with the persistent memory
> > range information so that existing 'nvdimm/pmem' driver
> > can reserve this into system memory map. This way
> > 'virtio-pmem' driver uses existing functionality of pmem
> > driver to register persistent memory compatible for DAX
> > capable filesystems.
> > 
> > This also provides function to perform guest flush over
> > VIRTIO from 'pmem' driver when userspace performs flush
> > on DAX memory range.
> > 
> > Signed-off-by: Pankaj Gupta <pagupta@...hat.com>
> > ---
> >  drivers/nvdimm/virtio_pmem.c     |  88 ++++++++++++++++++++++
> >  drivers/virtio/Kconfig           |  10 +++
> >  drivers/virtio/Makefile          |   1 +
> >  drivers/virtio/pmem.c            | 124 +++++++++++++++++++++++++++++++
> >  include/linux/virtio_pmem.h      |  60 +++++++++++++++
> >  include/uapi/linux/virtio_ids.h  |   1 +
> >  include/uapi/linux/virtio_pmem.h |  10 +++
> >  7 files changed, 294 insertions(+)
> >  create mode 100644 drivers/nvdimm/virtio_pmem.c
> >  create mode 100644 drivers/virtio/pmem.c
> >  create mode 100644 include/linux/virtio_pmem.h
> >  create mode 100644 include/uapi/linux/virtio_pmem.h
> > 
> (...)
> > diff --git a/drivers/virtio/pmem.c b/drivers/virtio/pmem.c
> > new file mode 100644
> > index 000000000000..cc9de9589d56
> > --- /dev/null
> > +++ b/drivers/virtio/pmem.c
> > @@ -0,0 +1,124 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * virtio_pmem.c: Virtio pmem Driver
> > + *
> > + * Discovers persistent memory range information
> > + * from host and registers the virtual pmem device
> > + * with libnvdimm core.
> > + */
> > +#include <linux/virtio_pmem.h>
> > +#include <../../drivers/nvdimm/nd.h>
> > +
> > +static struct virtio_device_id id_table[] = {
> > +	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
> > +	{ 0 },
> > +};
> > +
> > + /* Initialize virt queue */
> > +static int init_vq(struct virtio_pmem *vpmem)
> 
> IMHO, you don't gain much by splitting off this function...

It make sense to have all the vq-init-related stuff in one function, so
here pmem_lock and req_list are used only for the vq.
Saying that - maybe it would be better to have the 3 in one struct.

> 
> > +{
> > +	struct virtqueue *vq;
> > +
> > +	/* single vq */
> > +	vpmem->req_vq = vq = virtio_find_single_vq(vpmem->vdev,
> > +				host_ack, "flush_queue");
> > +	if (IS_ERR(vq))
> > +		return PTR_ERR(vq);
> 
> I'm personally not a fan of chained assignments... I think I'd just
> drop the 'vq' variable and operate on vpmem->req_vq directly.

+1

> 
> > +
> > +	spin_lock_init(&vpmem->pmem_lock);
> > +	INIT_LIST_HEAD(&vpmem->req_list);
> > +
> > +	return 0;
> > +};
> > +
> > +static int virtio_pmem_probe(struct virtio_device *vdev)
> > +{
> > +	int err = 0;
> > +	struct resource res;
> > +	struct virtio_pmem *vpmem;
> > +	struct nvdimm_bus *nvdimm_bus;
> > +	struct nd_region_desc ndr_desc = {};
> > +	int nid = dev_to_node(&vdev->dev);
> > +	struct nd_region *nd_region;
> > +
> > +	if (!vdev->config->get) {
> > +		dev_err(&vdev->dev, "%s failure: config disabled\n",
> 
> Maybe s/config disabled/config access disabled/ ? That seems to be the
> more common message.
> 
> > +			__func__);
> > +		return -EINVAL;
> > +	}
> > +
> > +	vdev->priv = vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem),
> > +					GFP_KERNEL);
> 
> Here, the vpmem variable makes sense for convenience, but I'm again not
> a fan of the chaining :)

+1

> 
> > +	if (!vpmem) {
> > +		err = -ENOMEM;
> > +		goto out_err;
> > +	}
> > +
> > +	vpmem->vdev = vdev;
> > +	err = init_vq(vpmem);
> > +	if (err)
> > +		goto out_err;
> > +
> > +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > +			start, &vpmem->start);
> > +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > +			size, &vpmem->size);
> > +
> > +	res.start = vpmem->start;
> > +	res.end   = vpmem->start + vpmem->size-1;
> > +	vpmem->nd_desc.provider_name = "virtio-pmem";
> > +	vpmem->nd_desc.module = THIS_MODULE;
> > +
> > +	vpmem->nvdimm_bus = nvdimm_bus = nvdimm_bus_register(&vdev->dev,
> > +						&vpmem->nd_desc);
> 
> And here :)
> 
> > +	if (!nvdimm_bus)
> > +		goto out_vq;
> > +
> > +	dev_set_drvdata(&vdev->dev, nvdimm_bus);
> > +
> > +	ndr_desc.res = &res;
> > +	ndr_desc.numa_node = nid;
> > +	ndr_desc.flush = virtio_pmem_flush;
> > +	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
> > +	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
> > +	nd_region = nvdimm_pmem_region_create(nvdimm_bus, &ndr_desc);
> > +	nd_region->provider_data =  dev_to_virtio
> > +					(nd_region->dev.parent->parent);
> 
> Isn't it clear that this parent chain will always end up at &vdev->dev?
> Maybe simply set ->provider_data to vdev directly? (Does it need to
> grab a reference count of the device, BTW?)
> 
> > +
> > +	if (!nd_region)
> > +		goto out_nd;
> 
> Probably better to do this check before you access nd_region's
> members :)
> 
> > +
> > +	return 0;
> > +out_nd:
> > +	err = -ENXIO;
> > +	nvdimm_bus_unregister(nvdimm_bus);
> > +out_vq:
> > +	vdev->config->del_vqs(vdev);
> > +out_err:
> > +	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
> > +	return err;
> > +}
> > +
> > +static void virtio_pmem_remove(struct virtio_device *vdev)
> > +{
> > +	struct virtio_pmem *vpmem = vdev->priv;
> > +	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
> > +
> > +	nvdimm_bus_unregister(nvdimm_bus);
> 
> I haven't followed this around the nvdimm code, but is the nd_region
> you created during probe cleaned up automatically, or would you need to
> do something here?
> 
> > +	vdev->config->del_vqs(vdev);
> > +	vdev->config->reset(vdev);
> > +	kfree(vpmem);
> 
> You allocated vpmem via devm_kzalloc; isn't it freed automatically on
> remove?
> 
> > +}
> > +
> > +static struct virtio_driver virtio_pmem_driver = {
> > +	.driver.name		= KBUILD_MODNAME,
> > +	.driver.owner		= THIS_MODULE,
> > +	.id_table		= id_table,
> > +	.probe			= virtio_pmem_probe,
> > +	.remove			= virtio_pmem_remove,
> > +};
> > +
> > +module_virtio_driver(virtio_pmem_driver);
> > +MODULE_DEVICE_TABLE(virtio, id_table);
> > +MODULE_DESCRIPTION("Virtio pmem driver");
> > +MODULE_LICENSE("GPL");
> 
> Only looked at this from the general virtio driver angle; seems fine
> apart from some easy-to-fix issues and some personal style preference
> things.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ