| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1554978456-20794-4-git-send-email-yoshihiro.shimoda.uh@renesas.com>
Date: Thu, 11 Apr 2019 19:27:36 +0900
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
To: kishon@...com, robh+dt@...nel.org, mark.rutland@....com
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Subject: [PATCH v2 3/3] phy: renesas: rcar-gen3-usb2: enable/disable independent irqs
Since the previous code enabled/disabled the irqs both OHCI and EHCI,
it is possible to cause unexpected interruptions. To avoid this,
this patch creates multiple phy instances from phandle and
enables/disables independent irqs by the instances.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Reviewed-by: Simon Horman <horms+renesas@...ge.net.au>
Reviewed-by: Fabrizio Castro <fabrizio.castro@...renesas.com>
Tested-by: Fabrizio Castro <fabrizio.castro@...renesas.com>
---
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 185 ++++++++++++++++++++++++++-----
1 file changed, 160 insertions(+), 25 deletions(-)
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 9e12d24..1322185 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -37,11 +37,8 @@
/* INT_ENABLE */
#define USB2_INT_ENABLE_UCOM_INTEN BIT(3)
-#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2)
-#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1)
-#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_UCOM_INTEN | \
- USB2_INT_ENABLE_USBH_INTB_EN | \
- USB2_INT_ENABLE_USBH_INTA_EN)
+#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) /* For EHCI */
+#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) /* For OHCI */
/* USBCTR */
#define USB2_USBCTR_DIRPD BIT(2)
@@ -78,11 +75,35 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
+#define NUM_OF_PHYS 4
+enum rcar_gen3_phy_index {
+ PHY_INDEX_BOTH_HC,
+ PHY_INDEX_OHCI,
+ PHY_INDEX_EHCI,
+ PHY_INDEX_HSUSB
+};
+
+static const u32 rcar_gen3_int_enable[NUM_OF_PHYS] = {
+ USB2_INT_ENABLE_USBH_INTB_EN | USB2_INT_ENABLE_USBH_INTA_EN,
+ USB2_INT_ENABLE_USBH_INTA_EN,
+ USB2_INT_ENABLE_USBH_INTB_EN,
+ 0
+};
+
+struct rcar_gen3_phy {
+ struct phy *phy;
+ struct rcar_gen3_chan *ch;
+ u32 int_enable_bits;
+ bool initialized;
+ bool otg_initialized;
+ bool powered;
+};
+
struct rcar_gen3_chan {
void __iomem *base;
struct device *dev; /* platform_device's device */
struct extcon_dev *extcon;
- struct phy *phy;
+ struct rcar_gen3_phy rphys[NUM_OF_PHYS];
struct regulator *vbus;
struct work_struct work;
enum usb_dr_mode dr_mode;
@@ -250,6 +271,42 @@ static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch)
return PHY_MODE_USB_DEVICE;
}
+static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch)
+{
+ int i;
+
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ if (ch->rphys[i].initialized)
+ return true;
+ }
+
+ return false;
+}
+
+static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch)
+{
+ int i;
+
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ if (ch->rphys[i].otg_initialized)
+ return false;
+ }
+
+ return true;
+}
+
+static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch)
+{
+ int i;
+
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ if (ch->rphys[i].powered)
+ return false;
+ }
+
+ return true;
+}
+
static ssize_t role_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -257,7 +314,7 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr,
bool is_b_device;
enum phy_mode cur_mode, new_mode;
- if (!ch->is_otg_channel || !ch->phy->init_count)
+ if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
return -EIO;
if (!strncmp(buf, "host", strlen("host")))
@@ -295,7 +352,7 @@ static ssize_t role_show(struct device *dev, struct device_attribute *attr,
{
struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
- if (!ch->is_otg_channel || !ch->phy->init_count)
+ if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
return -EIO;
return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
@@ -329,37 +386,62 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
static int rcar_gen3_phy_usb2_init(struct phy *p)
{
- struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+ struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+ struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
+ u32 val;
/* Initialize USB2 part */
- writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
+ val = readl(usb2_base + USB2_INT_ENABLE);
+ val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits;
+ writel(val, usb2_base + USB2_INT_ENABLE);
writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
/* Initialize otg part */
- if (channel->is_otg_channel)
- rcar_gen3_init_otg(channel);
+ if (channel->is_otg_channel) {
+ if (rcar_gen3_needs_init_otg(channel))
+ rcar_gen3_init_otg(channel);
+ rphy->otg_initialized = true;
+ }
+
+ rphy->initialized = true;
return 0;
}
static int rcar_gen3_phy_usb2_exit(struct phy *p)
{
- struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+ struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+ struct rcar_gen3_chan *channel = rphy->ch;
+ void __iomem *usb2_base = channel->base;
+ u32 val;
+
+ rphy->initialized = false;
- writel(0, channel->base + USB2_INT_ENABLE);
+ if (channel->is_otg_channel)
+ rphy->otg_initialized = false;
+
+ val = readl(usb2_base + USB2_INT_ENABLE);
+ val &= ~rphy->int_enable_bits;
+ if (!rcar_gen3_is_any_rphy_initialized(channel))
+ val &= ~USB2_INT_ENABLE_UCOM_INTEN;
+ writel(val, usb2_base + USB2_INT_ENABLE);
return 0;
}
static int rcar_gen3_phy_usb2_power_on(struct phy *p)
{
- struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+ struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+ struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
u32 val;
int ret;
+ if (!rcar_gen3_are_all_rphys_power_off(channel))
+ return 0;
+
if (channel->vbus) {
ret = regulator_enable(channel->vbus);
if (ret)
@@ -372,14 +454,22 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
val &= ~USB2_USBCTR_PLL_RST;
writel(val, usb2_base + USB2_USBCTR);
+ rphy->powered = true;
+
return 0;
}
static int rcar_gen3_phy_usb2_power_off(struct phy *p)
{
- struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+ struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+ struct rcar_gen3_chan *channel = rphy->ch;
int ret = 0;
+ rphy->powered = false;
+
+ if (!rcar_gen3_are_all_rphys_power_off(channel))
+ return 0;
+
if (channel->vbus)
ret = regulator_disable(channel->vbus);
@@ -448,6 +538,46 @@ static const unsigned int rcar_gen3_phy_cable[] = {
EXTCON_NONE,
};
+static struct phy *rcar_gen3_phy_usb2_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+
+ if (args->args_count == 0) /* For old version dts */
+ return ch->rphys[PHY_INDEX_BOTH_HC].phy;
+ else if (args->args_count > 1) /* Prevent invalid args count */
+ return ERR_PTR(-ENODEV);
+
+ if (args->args[0] >= NUM_OF_PHYS)
+ return ERR_PTR(-ENODEV);
+
+ return ch->rphys[args->args[0]].phy;
+}
+
+static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
+{
+ enum usb_dr_mode candidate = USB_DR_MODE_UNKNOWN;
+ int i;
+
+ /*
+ * If one of device nodes has other dr_mode except UNKNOWN,
+ * this function returns UNKNOWN. To achieve backward compatibility,
+ * this loop starts the index as 0.
+ */
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ enum usb_dr_mode mode = of_usb_get_dr_mode_by_phy(np, i);
+
+ if (mode != USB_DR_MODE_UNKNOWN) {
+ if (candidate == USB_DR_MODE_UNKNOWN)
+ candidate = mode;
+ else if (candidate != mode)
+ return USB_DR_MODE_UNKNOWN;
+ }
+ }
+
+ return candidate;
+}
+
static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -455,7 +585,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
struct phy_provider *provider;
struct resource *res;
const struct phy_ops *phy_usb2_ops;
- int irq, ret = 0;
+ int irq, ret = 0, i;
if (!dev->of_node) {
dev_err(dev, "This driver needs device tree\n");
@@ -481,7 +611,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
dev_err(dev, "No irq handler (%d)\n", irq);
}
- channel->dr_mode = of_usb_get_dr_mode_by_phy(dev->of_node, 0);
+ channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
int ret;
@@ -509,11 +639,17 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
if (!phy_usb2_ops)
return -EINVAL;
- channel->phy = devm_phy_create(dev, NULL, phy_usb2_ops);
- if (IS_ERR(channel->phy)) {
- dev_err(dev, "Failed to create USB2 PHY\n");
- ret = PTR_ERR(channel->phy);
- goto error;
+ for (i = 0; i < NUM_OF_PHYS; i++) {
+ channel->rphys[i].phy = devm_phy_create(dev, NULL,
+ phy_usb2_ops);
+ if (IS_ERR(channel->rphys[i].phy)) {
+ dev_err(dev, "Failed to create USB2 PHY\n");
+ ret = PTR_ERR(channel->rphys[i].phy);
+ goto error;
+ }
+ channel->rphys[i].ch = channel;
+ channel->rphys[i].int_enable_bits = rcar_gen3_int_enable[i];
+ phy_set_drvdata(channel->rphys[i].phy, &channel->rphys[i]);
}
channel->vbus = devm_regulator_get_optional(dev, "vbus");
@@ -526,10 +662,9 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, channel);
- phy_set_drvdata(channel->phy, channel);
channel->dev = dev;
- provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate);
if (IS_ERR(provider)) {
dev_err(dev, "Failed to register PHY provider\n");
ret = PTR_ERR(provider);
--
2.7.4
Powered by blists - more mailing lists