linux-kernel - Re: [PATCH 1/4] ARM: dts: imx6: RDU2: Use new CODEC reset pin name

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Thu, 11 Apr 2019 10:42:51 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     "Andrew F. Davis" <afd@...com>
Cc:     Sascha Hauer <s.hauer@...gutronix.de>,
        Benoît Cousson <bcousson@...libre.com>,
        Tony Lindgren <tony@...mide.com>, devicetree@...r.kernel.org,
        linux-omap@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/4] ARM: dts: imx6: RDU2: Use new CODEC reset pin name

On Fri, Mar 29, 2019 at 01:13:10PM -0500, Andrew F. Davis wrote:
> The correct DT property for specifying a GPIO used for reset
> is "reset-gpios", the driver now accepts this name, use it here.
> 
> Note the GPIO polarity in the driver was ignored before and always
> assumed to be active low, when all the DTs are fixed we will start
> respecting the specified polarity. Switch polarity in DT to the
> currently assumed one, this way when the driver changes the
> behavior will not change.
> 
> Signed-off-by: Andrew F. Davis <afd@...com>

I fixed up the prefix to use board name, and applied patch #1 ~ #3.

Shawn