[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190412080158.GG12975@pdeschrijver-desktop.Nvidia.com>
Date: Fri, 12 Apr 2019 11:01:58 +0300
From: Peter De Schrijver <pdeschrijver@...dia.com>
To: Dmitry Osipenko <digetx@...il.com>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Joseph Lo <josephl@...dia.com>, <devicetree@...r.kernel.org>,
<linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1 3/3] ARM: dts: tegra30: Add External Memory Controller
node
On Fri, Apr 12, 2019 at 02:02:21AM +0300, Dmitry Osipenko wrote:
> Add Add External Memory Controller node to the device-tree.
>
One 'Add' is enough I think :)
Peter.
> Signed-off-by: Dmitry Osipenko <digetx@...il.com>
> ---
> arch/arm/boot/dts/tegra30.dtsi | 11 +++++++++++
> drivers/memory/tegra/tegra30-emc.c | 3 ++-
> 2 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
> index e074258d4518..92c4aeafab29 100644
> --- a/arch/arm/boot/dts/tegra30.dtsi
> +++ b/arch/arm/boot/dts/tegra30.dtsi
> @@ -732,6 +732,17 @@
> #reset-cells = <1>;
> };
>
> + memory-controller@...0f400 {
> + compatible = "nvidia,tegra30-emc";
> + reg = <0x7000f400 0x400>;
> + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&tegra_car TEGRA30_CLK_EMC>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + nvidia,memory-controller = <&mc>;
> + };
> +
> fuse@...0f800 {
> compatible = "nvidia,tegra30-efuse";
> reg = <0x7000f800 0x400>;
> diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c
> index 38ebdb076ccd..defdb38bde54 100644
> --- a/drivers/memory/tegra/tegra30-emc.c
> +++ b/drivers/memory/tegra/tegra30-emc.c
> @@ -980,7 +980,8 @@ static long emc_round_rate(unsigned long rate,
> }
>
> if (!timing) {
> - dev_err(emc->dev, "no timing for rate %lu\n", rate);
> + dev_err(emc->dev, "no timing for rate %lu min %lu max %lu\n",
> + rate, min_rate, max_rate);
> return -EINVAL;
> }
>
> --
> 2.21.0
>
Powered by blists - more mailing lists