| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190413103305.9576-12-srinivas.kandagatla@linaro.org>
Date: Sat, 13 Apr 2019 11:32:56 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: gregkh@...uxfoundation.org
Cc: linux-kernel@...r.kernel.org, srinivas.kandagatla@...aro.org
Subject: [RESEND PATCH 11/20] nvmem: stm32: add support for STM32MP15 BSEC to control OTP data
From: Fabrice Gasnier <fabrice.gasnier@...com>
On STM32MP15, OTP area may be read/written by using BSEC (boot, security
and OTP control). BSEC registers set is composed of various regions, among
which control registers and OTP shadow registers.
Secure monitor calls are involved in this process to allow (or deny)
access to the full range of OTP data.
This adds support for reading and writing OTP data using SMC services.
Data content can be aligned on 16-bits or 8-bits. Then take care of it,
since BSEC data is 32-bits wide.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
drivers/nvmem/stm32-romem.c | 134 ++++++++++++++++++++++++++++++++++--
1 file changed, 129 insertions(+), 5 deletions(-)
diff --git a/drivers/nvmem/stm32-romem.c b/drivers/nvmem/stm32-romem.c
index 07e98b53b391..354be526897f 100644
--- a/drivers/nvmem/stm32-romem.c
+++ b/drivers/nvmem/stm32-romem.c
@@ -6,11 +6,29 @@
* Author: Fabrice Gasnier <fabrice.gasnier@...com> for STMicroelectronics.
*/
+#include <linux/arm-smccc.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/nvmem-provider.h>
#include <linux/of_device.h>
+/* BSEC secure service access from non-secure */
+#define STM32_SMC_BSEC 0x82001003
+#define STM32_SMC_READ_SHADOW 0x01
+#define STM32_SMC_PROG_OTP 0x02
+#define STM32_SMC_WRITE_SHADOW 0x03
+#define STM32_SMC_READ_OTP 0x04
+
+/* shadow registers offest */
+#define STM32MP15_BSEC_DATA0 0x200
+
+/* 32 (x 32-bits) lower shadow registers */
+#define STM32MP15_BSEC_NUM_LOWER 32
+
+struct stm32_romem_cfg {
+ int size;
+};
+
struct stm32_romem_priv {
void __iomem *base;
struct nvmem_config cfg;
@@ -29,8 +47,98 @@ static int stm32_romem_read(void *context, unsigned int offset, void *buf,
return 0;
}
+static int stm32_bsec_smc(u8 op, u32 otp, u32 data, u32 *result)
+{
+#if IS_ENABLED(CONFIG_HAVE_ARM_SMCCC)
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(STM32_SMC_BSEC, op, otp, data, 0, 0, 0, 0, &res);
+ if (res.a0)
+ return -EIO;
+
+ if (result)
+ *result = (u32)res.a1;
+
+ return 0;
+#else
+ return -ENXIO;
+#endif
+}
+
+static int stm32_bsec_read(void *context, unsigned int offset, void *buf,
+ size_t bytes)
+{
+ struct stm32_romem_priv *priv = context;
+ struct device *dev = priv->cfg.dev;
+ u32 roffset, rbytes, val;
+ u8 *buf8 = buf, *val8 = (u8 *)&val;
+ int i, j = 0, ret, skip_bytes, size;
+
+ /* Round unaligned access to 32-bits */
+ roffset = rounddown(offset, 4);
+ skip_bytes = offset & 0x3;
+ rbytes = roundup(bytes + skip_bytes, 4);
+
+ if (roffset + rbytes > priv->cfg.size)
+ return -EINVAL;
+
+ for (i = roffset; (i < roffset + rbytes); i += 4) {
+ u32 otp = i >> 2;
+
+ if (otp < STM32MP15_BSEC_NUM_LOWER) {
+ /* read lower data from shadow registers */
+ val = readl_relaxed(
+ priv->base + STM32MP15_BSEC_DATA0 + i);
+ } else {
+ ret = stm32_bsec_smc(STM32_SMC_READ_SHADOW, otp, 0,
+ &val);
+ if (ret) {
+ dev_err(dev, "Can't read data%d (%d)\n", otp,
+ ret);
+ return ret;
+ }
+ }
+ /* skip first bytes in case of unaligned read */
+ if (skip_bytes)
+ size = min(bytes, (size_t)(4 - skip_bytes));
+ else
+ size = min(bytes, (size_t)4);
+ memcpy(&buf8[j], &val8[skip_bytes], size);
+ bytes -= size;
+ j += size;
+ skip_bytes = 0;
+ }
+
+ return 0;
+}
+
+static int stm32_bsec_write(void *context, unsigned int offset, void *buf,
+ size_t bytes)
+{
+ struct stm32_romem_priv *priv = context;
+ struct device *dev = priv->cfg.dev;
+ u32 *buf32 = buf;
+ int ret, i;
+
+ /* Allow only writing complete 32-bits aligned words */
+ if ((bytes % 4) || (offset % 4))
+ return -EINVAL;
+
+ for (i = offset; i < offset + bytes; i += 4) {
+ ret = stm32_bsec_smc(STM32_SMC_PROG_OTP, i >> 2, *buf32++,
+ NULL);
+ if (ret) {
+ dev_err(dev, "Can't write data%d (%d)\n", i >> 2, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static int stm32_romem_probe(struct platform_device *pdev)
{
+ const struct stm32_romem_cfg *cfg;
struct device *dev = &pdev->dev;
struct stm32_romem_priv *priv;
struct resource *res;
@@ -45,21 +153,37 @@ static int stm32_romem_probe(struct platform_device *pdev)
return PTR_ERR(priv->base);
priv->cfg.name = "stm32-romem";
- priv->cfg.read_only = true;
priv->cfg.word_size = 1;
priv->cfg.stride = 1;
- priv->cfg.size = resource_size(res);
- priv->cfg.reg_read = stm32_romem_read;
priv->cfg.dev = dev;
priv->cfg.priv = priv;
priv->cfg.owner = THIS_MODULE;
+ cfg = (const struct stm32_romem_cfg *)
+ of_match_device(dev->driver->of_match_table, dev)->data;
+ if (!cfg) {
+ priv->cfg.read_only = true;
+ priv->cfg.size = resource_size(res);
+ priv->cfg.reg_read = stm32_romem_read;
+ } else {
+ priv->cfg.size = cfg->size;
+ priv->cfg.reg_read = stm32_bsec_read;
+ priv->cfg.reg_write = stm32_bsec_write;
+ }
+
return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg));
}
+static const struct stm32_romem_cfg stm32mp15_bsec_cfg = {
+ .size = 384, /* 96 x 32-bits data words */
+};
+
static const struct of_device_id stm32_romem_of_match[] = {
- { .compatible = "st,stm32f4-otp", },
- {},
+ { .compatible = "st,stm32f4-otp", }, {
+ .compatible = "st,stm32mp15-bsec",
+ .data = (void *)&stm32mp15_bsec_cfg,
+ }, {
+ },
};
MODULE_DEVICE_TABLE(of, stm32_romem_of_match);
--
2.21.0
Powered by blists - more mailing lists