lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+h21hqNMCzFKkdoeB0snbXY1E+BD3Rp24geuD_ZbNVPJf4kuQ@mail.gmail.com>
Date:   Sat, 13 Apr 2019 18:48:37 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     Florian Fainelli <f.fainelli@...il.com>, vivien.didelot@...il.com,
        davem@...emloft.net, netdev <netdev@...r.kernel.org>,
        linux-kernel@...r.kernel.org,
        Georg Waibel <georg.waibel@...sor-technik.de>
Subject: Re: [PATCH v3 net-next 13/24] net: dsa: Allow drivers to filter
 packets they can decode source port from

On Sat, 13 Apr 2019 at 18:40, Andrew Lunn <andrew@...n.ch> wrote:
>
> On Sat, Apr 13, 2019 at 04:28:11AM +0300, Vladimir Oltean wrote:
> > Frames get processed by DSA and redirected to switch port net devices
> > based on the ETH_P_XDSA multiplexed packet_type handler found by the
> > network stack when calling eth_type_trans().
> >
> > The running assumption is that once the DSA .rcv function is called, DSA
> > is always able to decode the switch tag in order to change the skb->dev
> > from its master.
> >
> > However there are tagging protocols (such as the new DSA_TAG_PROTO_SJA1105,
> > user of DSA_TAG_PROTO_8021Q) where this assumption is not completely
> > true, since switch tagging piggybacks on the absence of a vlan_filtering
> > bridge. Moreover, management traffic (BPDU, PTP) for this switch doesn't
> > rely on switch tagging, but on a different mechanism. So it would make
> > sense to at least be able to terminate that.
>
> Hi Vladimir
>
> Let me see if i get this correct.
>
> If the filter fails to match, the frame is received on the master
> interface? So BPDUs and PTT packets are going to go to the master
> interface?
>
> How does the bridge get these BPDUs, and associated to the correct
> slave port?
>
> How does the PTP core code get these frames, and associated to the
> correct slave port?
>
> You say there is a different mechanism to do this. Maybe a later patch
> i've not yet looked at. But cannot this mechanism be built into the
> tagger? That is what the tagger is there for, to demultiplex a frame
> to the correct slave. The current code assume the needed information
> is in the header, but there is nothing to stop it looking deeper into
> the packet if needed. So far, we have been reluctant for a tagger to
> call into the DSA driver, but if need be, it could happen.
>
>      Andrew


Hi Andrew,

Yes it's explained in a further patch. See the checks for
sja1105_is_link_local() in patch 18/24.
There's also a table in the documentation patch (23/24).

Thanks,
-Vladimir

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ