| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190413165418.27880-4-megous@megous.com>
Date: Sat, 13 Apr 2019 18:54:12 +0200
From: megous@...ous.com
To: linux-sunxi@...glegroups.com,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Ondrej Jirman <megous@...ous.com>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Mark Rutland <mark.rutland@....com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-gpio@...r.kernel.org
Subject: [PATCH v4 3/9] pinctrl: sunxi: Prepare for alternative bias voltage setting methods
From: Ondrej Jirman <megous@...ous.com>
H6 has a different I/O voltage bias setting method than A80. Prepare
existing code for using alternative bias voltage setting methods.
Signed-off-by: Ondrej Jirman <megous@...ous.com>
Acked-by: Maxime Ripard <maxime.ripard@...tlin.com>
---
drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c | 2 +-
drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 2 +-
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 47 ++++++++++++---------
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 11 ++++-
4 files changed, 39 insertions(+), 23 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c
index e05dd9a5551d..a191a65217ac 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c
@@ -153,7 +153,7 @@ static const struct sunxi_pinctrl_desc sun9i_a80_r_pinctrl_data = {
.pin_base = PL_BASE,
.irq_banks = 2,
.disable_strict_mode = true,
- .has_io_bias_cfg = true,
+ .io_bias_cfg_variant = BIAS_VOLTAGE_GRP_CONFIG,
};
static int sun9i_a80_r_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
index da37d594a13d..0633a03d5e13 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
@@ -722,7 +722,7 @@ static const struct sunxi_pinctrl_desc sun9i_a80_pinctrl_data = {
.npins = ARRAY_SIZE(sun9i_a80_pins),
.irq_banks = 5,
.disable_strict_mode = true,
- .has_io_bias_cfg = true,
+ .io_bias_cfg_variant = BIAS_VOLTAGE_GRP_CONFIG,
};
static int sun9i_a80_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index be04223591d4..98c4de5f4019 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -617,7 +617,7 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
u32 val, reg;
int uV;
- if (!pctl->desc->has_io_bias_cfg)
+ if (!pctl->desc->io_bias_cfg_variant)
return 0;
uV = regulator_get_voltage(supply);
@@ -628,25 +628,32 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
if (uV == 0)
return 0;
- /* Configured value must be equal or greater to actual voltage */
- if (uV <= 1800000)
- val = 0x0; /* 1.8V */
- else if (uV <= 2500000)
- val = 0x6; /* 2.5V */
- else if (uV <= 2800000)
- val = 0x9; /* 2.8V */
- else if (uV <= 3000000)
- val = 0xA; /* 3.0V */
- else
- val = 0xD; /* 3.3V */
-
- pin -= pctl->desc->pin_base;
-
- reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
- reg &= ~IO_BIAS_MASK;
- writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
-
- return 0;
+ switch (pctl->desc->io_bias_cfg_variant) {
+ case BIAS_VOLTAGE_GRP_CONFIG:
+ /*
+ * Configured value must be equal or greater to actual
+ * voltage.
+ */
+ if (uV <= 1800000)
+ val = 0x0; /* 1.8V */
+ else if (uV <= 2500000)
+ val = 0x6; /* 2.5V */
+ else if (uV <= 2800000)
+ val = 0x9; /* 2.8V */
+ else if (uV <= 3000000)
+ val = 0xA; /* 3.0V */
+ else
+ val = 0xD; /* 3.3V */
+
+ pin -= pctl->desc->pin_base;
+
+ reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
+ reg &= ~IO_BIAS_MASK;
+ writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
+ return 0;
+ default:
+ return -EINVAL;
+ }
}
static int sunxi_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index ee15ab067b5f..a62b81357136 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -95,6 +95,15 @@
#define PINCTRL_SUN7I_A20 BIT(7)
#define PINCTRL_SUN8I_R40 BIT(8)
+enum sunxi_desc_bias_voltage {
+ BIAS_VOLTAGE_NONE,
+ /*
+ * Bias voltage configuration is done through
+ * Pn_GRP_CONFIG registers, as seen on A80 SoC.
+ */
+ BIAS_VOLTAGE_GRP_CONFIG,
+};
+
struct sunxi_desc_function {
unsigned long variant;
const char *name;
@@ -117,7 +126,7 @@ struct sunxi_pinctrl_desc {
const unsigned int *irq_bank_map;
bool irq_read_needs_mux;
bool disable_strict_mode;
- bool has_io_bias_cfg;
+ enum sunxi_desc_bias_voltage io_bias_cfg_variant;
};
struct sunxi_pinctrl_function {
--
2.21.0
Powered by blists - more mailing lists