| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190414160144.331772825@linutronix.de>
Date: Sun, 14 Apr 2019 17:59:45 +0200
From: Thomas Gleixner <tglx@...utronix.de>
To: LKML <linux-kernel@...r.kernel.org>
Cc: x86@...nel.org, Andy Lutomirski <luto@...nel.org>,
Josh Poimboeuf <jpoimboe@...hat.com>,
Sean Christopherson <sean.j.christopherson@...el.com>
Subject: [patch V3 09/32] x86/exceptions: Make IST index zero based
The defines for the exception stack (IST) array in the TSS are using the
SDM convention IST1 - IST7. That causes all sorts of code to subtract 1 for
array indices related to IST. That's confusing at best and does not provide
any value.
Make the indices zero based and fixup the usage sites. The only code which
needs to adjust the 0 based index is the interrupt descriptor setup which
needs to add 1 now.
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
Reviewed-by: Sean Christopherson <sean.j.christopherson@...el.com>
---
Documentation/x86/kernel-stacks | 8 ++++----
arch/x86/entry/entry_64.S | 4 ++--
arch/x86/include/asm/page_64_types.h | 13 ++++++++-----
arch/x86/kernel/cpu/common.c | 4 ++--
arch/x86/kernel/dumpstack_64.c | 14 +++++++-------
arch/x86/kernel/idt.c | 15 +++++++++------
arch/x86/kernel/irq_64.c | 2 +-
arch/x86/mm/fault.c | 2 +-
8 files changed, 34 insertions(+), 28 deletions(-)
--- a/Documentation/x86/kernel-stacks
+++ b/Documentation/x86/kernel-stacks
@@ -59,7 +59,7 @@ If that assumption is ever broken then t
The currently assigned IST stacks are :-
-* DOUBLEFAULT_STACK. EXCEPTION_STKSZ (PAGE_SIZE).
+* ESTACK_DF. EXCEPTION_STKSZ (PAGE_SIZE).
Used for interrupt 8 - Double Fault Exception (#DF).
@@ -68,7 +68,7 @@ The currently assigned IST stacks are :-
Using a separate stack allows the kernel to recover from it well enough
in many cases to still output an oops.
-* NMI_STACK. EXCEPTION_STKSZ (PAGE_SIZE).
+* ESTACK_NMI. EXCEPTION_STKSZ (PAGE_SIZE).
Used for non-maskable interrupts (NMI).
@@ -76,7 +76,7 @@ The currently assigned IST stacks are :-
middle of switching stacks. Using IST for NMI events avoids making
assumptions about the previous state of the kernel stack.
-* DEBUG_STACK. DEBUG_STKSZ
+* ESTACK_DB. DEBUG_STKSZ
Used for hardware debug interrupts (interrupt 1) and for software
debug interrupts (INT3).
@@ -86,7 +86,7 @@ The currently assigned IST stacks are :-
avoids making assumptions about the previous state of the kernel
stack.
-* MCE_STACK. EXCEPTION_STKSZ (PAGE_SIZE).
+* ESTACK_MCE. EXCEPTION_STKSZ (PAGE_SIZE).
Used for interrupt 18 - Machine Check Exception (#MC).
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -841,7 +841,7 @@ apicinterrupt IRQ_WORK_VECTOR irq_work
/*
* Exception entry points.
*/
-#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8)
+#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + (x) * 8)
/**
* idtentry - Generate an IDT entry stub
@@ -1129,7 +1129,7 @@ apicinterrupt3 HYPERV_STIMER0_VECTOR \
hv_stimer0_callback_vector hv_stimer0_vector_handler
#endif /* CONFIG_HYPERV */
-idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
+idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=ESTACK_DB
idtentry int3 do_int3 has_error_code=0
idtentry stack_segment do_stack_segment has_error_code=1
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -24,11 +24,14 @@
#define IRQ_STACK_ORDER (2 + KASAN_STACK_ORDER)
#define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER)
-#define DOUBLEFAULT_STACK 1
-#define NMI_STACK 2
-#define DEBUG_STACK 3
-#define MCE_STACK 4
-#define N_EXCEPTION_STACKS 4 /* hw limit: 7 */
+/*
+ * The index for the tss.ist[] array. The hardware limit is 7 entries.
+ */
+#define ESTACK_DF 0
+#define ESTACK_NMI 1
+#define ESTACK_DB 2
+#define ESTACK_MCE 3
+#define N_EXCEPTION_STACKS 4
/*
* Set __PAGE_OFFSET to the most negative possible address +
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -516,7 +516,7 @@ DEFINE_PER_CPU(struct cpu_entry_area *,
*/
static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ,
- [DEBUG_STACK - 1] = DEBUG_STKSZ
+ [ESTACK_DB] = DEBUG_STKSZ
};
#endif
@@ -1760,7 +1760,7 @@ void cpu_init(void)
estacks += exception_stack_sizes[v];
oist->ist[v] = t->x86_tss.ist[v] =
(unsigned long)estacks;
- if (v == DEBUG_STACK-1)
+ if (v == ESTACK_DB)
per_cpu(debug_stack_addr, cpu) = (unsigned long)estacks;
}
}
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -18,16 +18,16 @@
#include <asm/stacktrace.h>
-static char *exception_stack_names[N_EXCEPTION_STACKS] = {
- [ DOUBLEFAULT_STACK-1 ] = "#DF",
- [ NMI_STACK-1 ] = "NMI",
- [ DEBUG_STACK-1 ] = "#DB",
- [ MCE_STACK-1 ] = "#MC",
+static const char *exception_stack_names[N_EXCEPTION_STACKS] = {
+ [ ESTACK_DF ] = "#DF",
+ [ ESTACK_NMI ] = "NMI",
+ [ ESTACK_DB ] = "#DB",
+ [ ESTACK_MCE ] = "#MC",
};
-static unsigned long exception_stack_sizes[N_EXCEPTION_STACKS] = {
+static const unsigned long exception_stack_sizes[N_EXCEPTION_STACKS] = {
[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ,
- [DEBUG_STACK - 1] = DEBUG_STKSZ
+ [ESTACK_DB] = DEBUG_STKSZ
};
const char *stack_type_name(enum stack_type type)
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -41,9 +41,12 @@ struct idt_data {
#define SYSG(_vector, _addr) \
G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL3, __KERNEL_CS)
-/* Interrupt gate with interrupt stack */
+/*
+ * Interrupt gate with interrupt stack. The _ist index is the index in
+ * the tss.ist[] array, but for the descriptor it needs to start at 1.
+ */
#define ISTG(_vector, _addr, _ist) \
- G(_vector, _addr, _ist, GATE_INTERRUPT, DPL0, __KERNEL_CS)
+ G(_vector, _addr, _ist + 1, GATE_INTERRUPT, DPL0, __KERNEL_CS)
/* Task gate */
#define TSKG(_vector, _gdt) \
@@ -180,11 +183,11 @@ gate_desc debug_idt_table[IDT_ENTRIES] _
* cpu_init() when the TSS has been initialized.
*/
static const __initconst struct idt_data ist_idts[] = {
- ISTG(X86_TRAP_DB, debug, DEBUG_STACK),
- ISTG(X86_TRAP_NMI, nmi, NMI_STACK),
- ISTG(X86_TRAP_DF, double_fault, DOUBLEFAULT_STACK),
+ ISTG(X86_TRAP_DB, debug, ESTACK_DB),
+ ISTG(X86_TRAP_NMI, nmi, ESTACK_NMI),
+ ISTG(X86_TRAP_DF, double_fault, ESTACK_DF),
#ifdef CONFIG_X86_MCE
- ISTG(X86_TRAP_MC, &machine_check, MCE_STACK),
+ ISTG(X86_TRAP_MC, &machine_check, ESTACK_MCE),
#endif
};
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -61,7 +61,7 @@ static inline void stack_overflow_check(
return;
oist = this_cpu_ptr(&orig_ist);
- estack_top = (u64)oist->ist[DEBUG_STACK];
+ estack_top = (u64)oist->ist[ESTACK_DB];
estack_bottom = estack_top - DEBUG_STKSZ + STACK_MARGIN;
if (regs->sp >= estack_bottom && regs->sp <= estack_top)
return;
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -793,7 +793,7 @@ no_context(struct pt_regs *regs, unsigne
if (is_vmalloc_addr((void *)address) &&
(((unsigned long)tsk->stack - 1 - address < PAGE_SIZE) ||
address - ((unsigned long)tsk->stack + THREAD_SIZE) < PAGE_SIZE)) {
- unsigned long stack = this_cpu_read(orig_ist.ist[DOUBLEFAULT_STACK]) - sizeof(void *);
+ unsigned long stack = this_cpu_read(orig_ist.ist[ESTACK_DF]) - sizeof(void *);
/*
* We're likely to be running with very little stack space
* left. It's plausible that we'd hit this condition but
Powered by blists - more mailing lists