| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190414183641.7539-2-tszucs@protonmail.ch>
Date: Sun, 14 Apr 2019 20:36:41 +0200
From: Tamás Szűcs <tszucs@...tonmail.ch>
To: Amitkumar Karwar <amitkarwar@...il.com>,
Nishant Sarmukadam <nishants@...vell.com>,
Ganapathi Bhat <gbhat@...vell.com>,
Xinming Hu <huxinming820@...il.com>,
Kalle Valo <kvalo@...eaurora.org>,
"David S . Miller" <davem@...emloft.net>,
linux-wireless@...r.kernel.org (open list:MARVELL MWIFIEX WIRELESS
DRIVER), netdev@...r.kernel.org (open list:NETWORKING DRIVERS),
linux-kernel@...r.kernel.org (open list)
Cc: Cathy Luo <cluo@...vell.com>, Zhiyuan Yang <yangzy@...vell.com>,
James Cao <jcao@...vell.com>,
Rakesh Parmar <rakeshp@...vell.com>,
Hemantkumar Suthar <shemant@...vell.com>,
Tamás Szűcs <tszucs@...tonmail.ch>
Subject: [PATCH 1/1] mwifiex: add support for SD8987 chipset
This patch adds support for Marvell 88W8987 chipset with SDIO interface.
Register offsets and supported feature flags are updated. The corresponding
firmware image file shall be "mrvl/sd8987_uapsta.bin".
Signed-off-by: Tamás Szűcs <tszucs@...tonmail.ch>
---
drivers/net/wireless/marvell/mwifiex/Kconfig | 4 +-
drivers/net/wireless/marvell/mwifiex/sdio.c | 5 ++
drivers/net/wireless/marvell/mwifiex/sdio.h | 69 ++++++++++++++++++++++++++++
3 files changed, 76 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/Kconfig b/drivers/net/wireless/marvell/mwifiex/Kconfig
index 524fd565cb2a..572d187a99f4 100644
--- a/drivers/net/wireless/marvell/mwifiex/Kconfig
+++ b/drivers/net/wireless/marvell/mwifiex/Kconfig
@@ -9,13 +9,13 @@ config MWIFIEX
mwifiex.
config MWIFIEX_SDIO
- tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997"
+ tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997"
depends on MWIFIEX && MMC
select FW_LOADER
select WANT_DEV_COREDUMP
---help---
This adds support for wireless adapters based on Marvell
- 8786/8787/8797/8887/8897/8997 chipsets with SDIO interface.
+ 8786/8787/8797/8887/8897/8977/8987/8997 chipsets with SDIO interface.
If you choose to build it as a module, it will be called
mwifiex_sdio.
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index a85648342d15..32bf2baeba9a 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -491,6 +491,8 @@ static void mwifiex_sdio_coredump(struct device *dev)
#define SDIO_DEVICE_ID_MARVELL_8801 (0x9139)
/* Device ID for SD8977 */
#define SDIO_DEVICE_ID_MARVELL_8977 (0x9145)
+/* Device ID for SD8987 */
+#define SDIO_DEVICE_ID_MARVELL_8987 (0x9149)
/* Device ID for SD8997 */
#define SDIO_DEVICE_ID_MARVELL_8997 (0x9141)
@@ -511,6 +513,8 @@ static const struct sdio_device_id mwifiex_ids[] = {
.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8977),
.driver_data = (unsigned long)&mwifiex_sdio_sd8977},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8987),
+ .driver_data = (unsigned long)&mwifiex_sdio_sd8987},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997),
.driver_data = (unsigned long)&mwifiex_sdio_sd8997},
{},
@@ -2731,4 +2735,5 @@ MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8977_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8987_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h
index 912de2cde8d9..f672bdf52cc1 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.h
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.h
@@ -37,6 +37,7 @@
#define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
#define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
#define SD8977_DEFAULT_FW_NAME "mrvl/sd8977_uapsta.bin"
+#define SD8987_DEFAULT_FW_NAME "mrvl/sd8987_uapsta.bin"
#define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
#define BLOCK_MODE 1
@@ -526,6 +527,58 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8887 = {
0x68, 0x69, 0x6a},
};
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8987 = {
+ .start_rd_port = 0,
+ .start_wr_port = 0,
+ .base_0_reg = 0xF8,
+ .base_1_reg = 0xF9,
+ .poll_reg = 0x5C,
+ .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+ CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+ .host_int_rsr_reg = 0x4,
+ .host_int_status_reg = 0x0C,
+ .host_int_mask_reg = 0x08,
+ .status_reg_0 = 0xE8,
+ .status_reg_1 = 0xE9,
+ .sdio_int_mask = 0xff,
+ .data_port_mask = 0xffffffff,
+ .io_port_0_reg = 0xE4,
+ .io_port_1_reg = 0xE5,
+ .io_port_2_reg = 0xE6,
+ .max_mp_regs = 196,
+ .rd_bitmap_l = 0x10,
+ .rd_bitmap_u = 0x11,
+ .rd_bitmap_1l = 0x12,
+ .rd_bitmap_1u = 0x13,
+ .wr_bitmap_l = 0x14,
+ .wr_bitmap_u = 0x15,
+ .wr_bitmap_1l = 0x16,
+ .wr_bitmap_1u = 0x17,
+ .rd_len_p0_l = 0x18,
+ .rd_len_p0_u = 0x19,
+ .card_misc_cfg_reg = 0xd8,
+ .card_cfg_2_1_reg = 0xd9,
+ .cmd_rd_len_0 = 0xc0,
+ .cmd_rd_len_1 = 0xc1,
+ .cmd_rd_len_2 = 0xc2,
+ .cmd_rd_len_3 = 0xc3,
+ .cmd_cfg_0 = 0xc4,
+ .cmd_cfg_1 = 0xc5,
+ .cmd_cfg_2 = 0xc6,
+ .cmd_cfg_3 = 0xc7,
+ .fw_dump_host_ready = 0xcc,
+ .fw_dump_ctrl = 0xf9,
+ .fw_dump_start = 0xf1,
+ .fw_dump_end = 0xf8,
+ .func1_dump_reg_start = 0x10,
+ .func1_dump_reg_end = 0x17,
+ .func1_scratch_reg = 0xE8,
+ .func1_spec_reg_num = 13,
+ .func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D, 0x60,
+ 0x61, 0x62, 0x64, 0x65, 0x66,
+ 0x68, 0x69, 0x6a},
+};
+
static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
.firmware = SD8786_DEFAULT_FW_NAME,
.reg = &mwifiex_reg_sd87xx,
@@ -633,6 +686,22 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
.can_ext_scan = true,
};
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8987 = {
+ .firmware = SD8987_DEFAULT_FW_NAME,
+ .reg = &mwifiex_reg_sd8987,
+ .max_ports = 32,
+ .mp_agg_pkt_limit = 16,
+ .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
+ .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+ .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+ .supports_sdio_new_mode = true,
+ .has_control_mask = false,
+ .can_dump_fw = true,
+ .fw_dump_enh = true,
+ .can_auto_tdls = true,
+ .can_ext_scan = true,
+};
+
static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = {
.firmware = SD8801_DEFAULT_FW_NAME,
.reg = &mwifiex_reg_sd87xx,
--
2.11.0
Powered by blists - more mailing lists