[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190415093648.7525-3-anup.patel@wdc.com>
Date: Mon, 15 Apr 2019 09:37:23 +0000
From: Anup Patel <Anup.Patel@....com>
To: Palmer Dabbelt <palmer@...ive.com>,
Albert Ou <aou@...s.berkeley.edu>
CC: Atish Patra <Atish.Patra@....com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Christoph Hellwig <hch@...radead.org>,
"linux-riscv@...ts.infradead.org" <linux-riscv@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Anup Patel <Anup.Patel@....com>
Subject: [PATCH v3 2/3] RISC-V: Add interrupt related SCAUSE defines in
asm/csr.h
This patch adds SCAUSE interrupt flag and SCAUSE interrupt related
defines to asm/csr.h. We also use these defines in kernel/irq.c and
express SIE/SIP flags in-terms of SCAUSE interrupt causes.
Signed-off-by: Anup Patel <anup.patel@....com>
---
arch/riscv/include/asm/csr.h | 25 +++++++++++++++++++++----
arch/riscv/kernel/irq.c | 23 ++++-------------------
2 files changed, 25 insertions(+), 23 deletions(-)
diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index 2ae54a7386f1..ab40a936cb2d 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -51,10 +51,22 @@
#define SATP_MODE SATP_MODE_39
#endif
-/* Interrupt Enable and Interrupt Pending flags */
-#define SIE_SSIE _AC(0x00000002, UL) /* Software Interrupt Enable */
-#define SIE_STIE _AC(0x00000020, UL) /* Timer Interrupt Enable */
-#define SIE_SEIE _AC(0x00000200, UL) /* External Interrupt Enable */
+/* SCAUSE */
+#ifdef CONFIG_64BIT
+#define SCAUSE_IRQ_FLAG _AC(0x8000000000000000, UL)
+#else
+#define SCAUSE_IRQ_FLAG _AC(0x80000000, UL)
+#endif
+
+#define IRQ_U_SOFT 0
+#define IRQ_S_SOFT 1
+#define IRQ_M_SOFT 3
+#define IRQ_U_TIMER 4
+#define IRQ_S_TIMER 5
+#define IRQ_M_TIMER 7
+#define IRQ_U_EXT 8
+#define IRQ_S_EXT 9
+#define IRQ_M_EXT 11
#define EXC_INST_MISALIGNED 0
#define EXC_INST_ACCESS 1
@@ -66,6 +78,11 @@
#define EXC_LOAD_PAGE_FAULT 13
#define EXC_STORE_PAGE_FAULT 15
+/* SIE (Interrupt Enable) and SIP (Interrupt Pending) flags */
+#define SIE_SSIE (_AC(0x1, UL) << IRQ_S_SOFT)
+#define SIE_STIE (_AC(0x1, UL) << IRQ_S_TIMER)
+#define SIE_SEIE (_AC(0x1, UL) << IRQ_S_EXT)
+
#ifndef __ASSEMBLY__
#define csr_swap(csr, val) \
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 48e6b7db83a1..68e5025b5a58 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -11,21 +11,6 @@
#include <linux/seq_file.h>
#include <asm/smp.h>
-/*
- * Possible interrupt causes:
- */
-#define INTERRUPT_CAUSE_SOFTWARE 1
-#define INTERRUPT_CAUSE_TIMER 5
-#define INTERRUPT_CAUSE_EXTERNAL 9
-
-/*
- * The high order bit of the trap cause register is always set for
- * interrupts, which allows us to differentiate them from exceptions
- * quickly. The INTERRUPT_CAUSE_* macros don't contain that bit, so we
- * need to mask it off.
- */
-#define INTERRUPT_CAUSE_FLAG (1UL << (__riscv_xlen - 1))
-
int arch_show_interrupts(struct seq_file *p, int prec)
{
show_ipi_stats(p, prec);
@@ -37,12 +22,12 @@ asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
struct pt_regs *old_regs = set_irq_regs(regs);
irq_enter();
- switch (regs->scause & ~INTERRUPT_CAUSE_FLAG) {
- case INTERRUPT_CAUSE_TIMER:
+ switch (regs->scause & ~SCAUSE_IRQ_FLAG) {
+ case IRQ_S_TIMER:
riscv_timer_interrupt();
break;
#ifdef CONFIG_SMP
- case INTERRUPT_CAUSE_SOFTWARE:
+ case IRQ_S_SOFT:
/*
* We only use software interrupts to pass IPIs, so if a non-SMP
* system gets one, then we don't know what to do.
@@ -50,7 +35,7 @@ asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs)
riscv_software_interrupt();
break;
#endif
- case INTERRUPT_CAUSE_EXTERNAL:
+ case IRQ_S_EXT:
handle_arch_irq(regs);
break;
default:
--
2.17.1
Powered by blists - more mailing lists