linux-kernel - Re: [PATCH v3 2/3] dt-bindings: backlight: add lm3630a bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <051b5306-9dab-6249-9e41-b815dce1f2e2@ti.com>
Date:   Mon, 15 Apr 2019 07:10:04 -0500
From:   Dan Murphy <dmurphy@...com>
To:     Brian Masney <masneyb@...tation.org>, <lee.jones@...aro.org>,
        <daniel.thompson@...aro.org>, <jingoohan1@...il.com>,
        <robh+dt@...nel.org>
CC:     <jacek.anaszewski@...il.com>, <pavel@....cz>,
        <mark.rutland@....com>, <b.zolnierkie@...sung.com>,
        <dri-devel@...ts.freedesktop.org>, <linux-leds@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-fbdev@...r.kernel.org>, <jonathan@...ek.ca>
Subject: Re: [PATCH v3 2/3] dt-bindings: backlight: add lm3630a bindings

Brian
On 4/15/19 2:29 AM, Brian Masney wrote:
> Add new backlight bindings for the TI LM3630A dual-string white LED.
> 
> Signed-off-by: Brian Masney <masneyb@...tation.org>
> ---
> Rob: Since the common bindings aren't converted to the new JSON schema
> yet, I'm not sure how to do led-sources here. I would expect that we'd
> have the uint32-array on the common binding once it exists. I had to
> add it here to keep 'make dt_binding_check' happy. I left the
> description off though for that property since that'll come from common
> once its converted.
> 
> Changes since v2:
> - Update description of max-brightness
> - Add description for reg
> - Correct typo: s/tranisiton/transition
> - Remove label from bindings since this isn't on backlight_properties
> - add reg to control banks
> - add additionalProperties
> 
>  .../leds/backlight/lm3630a-backlight.yaml     | 124 ++++++++++++++++++
>  1 file changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> new file mode 100644
> index 000000000000..cccd43c02732
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/lm3630a-backlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI LM3630A High-Efficiency Dual-String White LED
> +
> +maintainers:
> +  - Lee Jones <lee.jones@...aro.org>
> +  - Daniel Thompson <daniel.thompson@...aro.org>
> +  - Jingoo Han <jingoohan1@...il.com>
> +
> +description: |
> +  The LM3630A is a current-mode boost converter which supplies the power and
> +  controls the current in up to two strings of 10 LEDs per string.
> +  https://www.ti.com/product/LM3630A
> +
> +properties:
> +  compatible:
> +    const: ti,lm3630a
> +
> +  reg:
> +    description: The I2C address of the device
> +    maxItems: 1
> +
> +  ti,linear-mapping-mode:
> +    description: |
> +      Enable linear mapping mode. If disabled, then it will use exponential
> +      mapping mode in which the ramp up/down appears to have a more uniform
> +      transition to the human eye.
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - reg
> +
> +patternProperties:
> +  "^led@[01]$":
> +    type: object
> +    description: |
> +      Properties for a string of connected LEDs.
> +
> +    properties:
> +      reg:
> +        description: Control Bank
> +        maxItems: 1
> +        minimum: 0
> +        maximum: 1
> +
> +      led-sources:
> +        allOf:
> +          - $ref: /schemas/types.yaml#/definitions/uint32-array
> +          - minItems: 1
> +            maxItems: 2
> +            items:
> +              minimum: 0
> +              maximum: 1
> +
> +      default-brightness:
> +        description: Default brightness level on boot.
> +        minimum: 0
> +        maximum: 255
> +
> +      max-brightness:
> +        description: Maximum brightness that is allowed during runtime.
> +        minimum: 0
> +        maximum: 255
> +
> +    required:
> +      - reg
> +
> +    additionalProperties: false
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        lm3630a_bl@38 {
> +                compatible = "ti,lm3630a";
> +                status = "ok";
> +                reg = <0x38>;
> +
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                led@0 {
> +                        reg = <0>;
> +                        led-sources = <0 1>;
> +                        default-brightness = <200>;
> +                        max-brightness = <255>;
> +                };
> +        };
> +    };
> +  - |

I noticed we are missing "label".  It is defined as optional and it is hard coded in the driver
but wondering if there is a need to add it.


Dan
<snip>