lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Mon, 15 Apr 2019 08:10:14 -0500
From:   Adam Ford <aford173@...il.com>
To:     Bartosz Golaszewski <brgl@...ev.pl>
Cc:     Sekhar Nori <nsekhar@...com>, Kevin Hilman <khilman@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        David Lechner <david@...hnology.com>,
        arm-soc <linux-arm-kernel@...ts.infradead.org>,
        devicetree <devicetree@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: Re: [PATCH v4 4/5] ARM: dts: da850-evm: enable cpufreq

On Fri, Apr 12, 2019 at 8:44 AM Bartosz Golaszewski <brgl@...ev.pl> wrote:
>
> From: Bartosz Golaszewski <bgolaszewski@...libre.com>
>
> Enable cpufreq-dt support for da850-evm. The cvdd is supplied by the
> tps6507 pmic with configurable output voltage. By default da850-evm

 It's just a little minor typo, but technically, the PMIC is TPS65070.

> boards support frequencies up to 375MHz so enable this operating
> point.
>
Reviewed-by: Adam Ford <aford173@...il.com>

> Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
> ---
>  arch/arm/boot/dts/da850-evm.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index f04bc3e15332..f94bb38fdad9 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -191,6 +191,19 @@
>         };
>  };
>
> +&cpu {
> +       cpu-supply = <&vdcdc3_reg>;
> +};
> +
> +/*
> + * The standard da850-evm kits and SOM's are 375MHz so enable this operating
> + * point by default. Higher frequencies must be enabled for custom boards with
> + * other variants of the SoC.
> + */
> +&opp_375 {
> +       status = "okay";
> +};
> +
>  &sata {
>         status = "okay";
>  };
> --
> 2.21.0
>

Powered by blists - more mailing lists