| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190415180510.6044-1-krzk@kernel.org>
Date: Mon, 15 Apr 2019 20:05:07 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Andrzej Hajda <a.hajda@...sung.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 1/4] ARM: dts: exynos: Move pmu and timer nodes out of soc
The ARM PMU and ARM architected timer nodes are part of ARM CPU design
therefore they should not be inside the soc node. This also fixes DTC
W=1 warnings like:
arch/arm/boot/dts/exynos3250.dtsi:106.21-135.5:
Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property
arch/arm/boot/dts/exynos3250.dtsi:676.7-680.5:
Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
arch/arm/boot/dts/exynos3250.dtsi | 12 +++++-----
arch/arm/boot/dts/exynos4.dtsi | 12 +++++-----
arch/arm/boot/dts/exynos5250.dtsi | 40 +++++++++++++++----------------
arch/arm/boot/dts/exynos54xx.dtsi | 38 ++++++++++++++---------------
4 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 5892a9f7622f..af54b306204b 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -97,6 +97,12 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -673,12 +679,6 @@
status = "disabled";
};
- pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- };
-
ppmu_dmc0: ppmu_dmc0@...a0000 {
compatible = "samsung,exynos-ppmu";
reg = <0x106a0000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 6085e92ac2d7..1c21627e3c3c 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -51,6 +51,12 @@
serial3 = &serial_3;
};
+ pmu: pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <2 2>, <3 2>;
+ };
+
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -169,12 +175,6 @@
reg = <0x10440000 0x1000>;
};
- pmu: pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupt-parent = <&combiner>;
- interrupts = <2 2>, <3 2>;
- };
-
sys_reg: syscon@...10000 {
compatible = "samsung,exynos4-sysreg", "syscon";
reg = <0x10010000 0x400>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 80986b97dfe5..96ace6a5e2f9 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -157,6 +157,26 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <1 2>, <22 4>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ /*
+ * Unfortunately we need this since some versions
+ * of U-Boot on Exynos don't set the CNTFRQ register,
+ * so we need the value from DT.
+ */
+ clock-frequency = <24000000>;
+ };
+
soc: soc {
sysram@...0000 {
compatible = "mmio-sram";
@@ -227,20 +247,6 @@
power-domains = <&pd_mau>;
};
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- /*
- * Unfortunately we need this since some versions
- * of U-Boot on Exynos don't set the CNTFRQ register,
- * so we need the value from DT.
- */
- clock-frequency = <24000000>;
- };
-
mct@...c0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
@@ -265,12 +271,6 @@
};
};
- pmu {
- compatible = "arm,cortex-a15-pmu";
- interrupt-parent = <&combiner>;
- interrupts = <1 2>, <22 4>;
- };
-
pinctrl_0: pinctrl@...00000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index de26e5ee0d2d..ae866bcc30c4 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -25,27 +25,27 @@
usbdrdphy1 = &usbdrd_phy1;
};
- soc: soc {
- arm_a7_pmu: arm-a7-pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
+ arm_a7_pmu: arm-a7-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
- arm_a15_pmu: arm-a15-pmu {
- compatible = "arm,cortex-a15-pmu";
- interrupt-parent = <&combiner>;
- interrupts = <1 2>,
- <7 0>,
- <16 6>,
- <19 2>;
- status = "disabled";
- };
+ arm_a15_pmu: arm-a15-pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <1 2>,
+ <7 0>,
+ <16 6>,
+ <19 2>;
+ status = "disabled";
+ };
+ soc: soc {
sysram@...0000 {
compatible = "mmio-sram";
reg = <0x02020000 0x54000>;
--
2.17.1
Powered by blists - more mailing lists