| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 16 Apr 2019 11:36:19 -0700
From: Ruslan Babayev <ruslan@...ayev.com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: xe-linux-external@...co.com, Jean Delvare <jdelvare@...e.com>,
linux-hwmon@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 4/4] hwmon: (pmbus/tps40422) add support for output voltage margining
TPS40422 has MFR_SPECIFIC registers STEP_VREF_MARGIN_HIGH and
STEP_VREF_MARGIN_LOW, which are signed 16-bit in units of 2mV. This
value is an offset from the nominal reference voltage of 600mV.
For instance, the default value of STEP_VREF_MARGIN_LOW is -30
(decimal), which corresponds to a default margin low voltage of
600 - 30 * 2 = 540mV.
Introduce tps40422_{read/write}_word_data() callbacks to map the
MFR_SPECIFIC registers to standard PMBUS_VOUT_MARGIN_HIGH and
PMBUS_VOUT_MARGIN_LOW. For the latter, pmbus_core stores sensor data
in linear16 format as specified in VOUT_MODE. Note, that on TPS40422
the exponent is fixed at (-9). The callbacks will perform the
necessary conversions.
Cc: xe-linux-external@...co.com
Signed-off-by: Ruslan Babayev <ruslan@...ayev.com>
---
drivers/hwmon/pmbus/tps40422.c | 54 ++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/drivers/hwmon/pmbus/tps40422.c b/drivers/hwmon/pmbus/tps40422.c
index 32803825d47e..129d1b0e6b43 100644
--- a/drivers/hwmon/pmbus/tps40422.c
+++ b/drivers/hwmon/pmbus/tps40422.c
@@ -21,16 +21,70 @@
#include <linux/i2c.h>
#include "pmbus.h"
+#define TPS40422_STEP_VREF_MARGIN_HIGH 0xd5
+#define TPS40422_STEP_VREF_MARGIN_LOW 0xd6
+#define TPS40422_VREF 600
+
+static int tps40422_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VOUT_MARGIN_HIGH:
+ reg = TPS40422_STEP_VREF_MARGIN_HIGH;
+ break;
+ case PMBUS_VOUT_MARGIN_LOW:
+ reg = TPS40422_STEP_VREF_MARGIN_LOW;
+ break;
+ default:
+ return -ENODATA;
+ }
+
+ ret = pmbus_read_word_data(client, page, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = (TPS40422_VREF + ((s16)ret) * 2) << 9;
+ ret = DIV_ROUND_CLOSEST(ret, 1000);
+
+ return ret;
+}
+
+static int tps40422_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ u16 val;
+
+ switch (reg) {
+ case PMBUS_VOUT_MARGIN_HIGH:
+ reg = TPS40422_STEP_VREF_MARGIN_HIGH;
+ break;
+ case PMBUS_VOUT_MARGIN_LOW:
+ reg = TPS40422_STEP_VREF_MARGIN_LOW;
+ break;
+ default:
+ return -ENODATA;
+ }
+
+ val = ((((long)word * 1000) >> 9) - TPS40422_VREF + 1) / 2;
+ return pmbus_write_word_data(client, page, reg, val);
+}
+
+
static struct pmbus_driver_info tps40422_info = {
.pages = 2,
+ .read_word_data = tps40422_read_word_data,
+ .write_word_data = tps40422_write_word_data,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = linear,
.format[PSC_TEMPERATURE] = linear,
.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP2
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_VOUT_MARGIN_HIGH | PMBUS_HAVE_VOUT_MARGIN_LOW
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP2
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_VOUT_MARGIN_HIGH | PMBUS_HAVE_VOUT_MARGIN_LOW
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
};
--
2.17.1
Powered by blists - more mailing lists