| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190416215351.242246-3-dianders@chromium.org>
Date: Tue, 16 Apr 2019 14:53:49 -0700
From: Douglas Anderson <dianders@...omium.org>
To: Rob Herring <robh+dt@...nel.org>,
Minas Harutyunyan <hminas@...opsys.com>,
Heiko Stuebner <heiko@...ech.de>,
Felipe Balbi <felipe.balbi@...ux.intel.com>
Cc: amstan@...omium.org, linux-rockchip@...ts.infradead.org,
linux-usb@...r.kernel.org, Randy Li <ayaka@...lik.info>,
mka@...omium.org, ryandcase@...omium.org, jwerner@...omium.org,
Elaine Zhang <zhangqing@...k-chips.com>,
Douglas Anderson <dianders@...omium.org>,
Yunzhi Li <lyz@...k-chips.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/4] usb: dwc2: optionally assert phy reset when waking up
On the rk3288 USB host-only port (the one that's not the OTG-enabled
port) the PHY can get into a bad state when a wakeup is asserted (not
just a wakeup from full system suspend but also a wakeup from
autosuspend).
We can get the PHY out of its bad state by asserting its "port reset",
but unfortunately that seems to assert a reset onto the USB bus so it
could confuse things if we don't actually deenumerate / reenumerate the
device.
We can also get the PHY out of its bad state by fully resetting it using
the reset from the CRU (clock reset unit), which does a more full
reset. The CRU-based reset appears to actually cause devices on the bus
to be removed and reinserted, which fixes the problem (albeit in a hacky
way).
It's unfortunate that we need to do a full re-enumeration of devices at
wakeup time, but this is better than alternative of letting the bus get
wedged.
Signed-off-by: Douglas Anderson <dianders@...omium.org>
Signed-off-by: Yunzhi Li <lyz@...k-chips.com>
---
Changes in v2:
- Cancel the work when dwc2 is freed (Matthias).
drivers/usb/dwc2/core.h | 5 +++++
drivers/usb/dwc2/core_intr.c | 12 ++++++++++++
drivers/usb/dwc2/hcd.c | 18 +++++++++++++++---
drivers/usb/dwc2/platform.c | 9 +++++++++
4 files changed, 41 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 30bab8463c96..f30748f4fe7e 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -859,6 +859,8 @@ struct dwc2_hregs_backup {
* @gadget_enabled: Peripheral mode sub-driver initialization indicator.
* @ll_hw_enabled: Status of low-level hardware resources.
* @hibernated: True if core is hibernated
+ * @reset_phy_on_wake: Quirk saying that we should assert PHY reset on a
+ * remote wakeup.
* @frame_number: Frame number read from the core. For both device
* and host modes. The value ranges are from 0
* to HFNUM_MAX_FRNUM.
@@ -972,6 +974,7 @@ struct dwc2_hregs_backup {
* @status_buf_dma: DMA address for status_buf
* @start_work: Delayed work for handling host A-cable connection
* @reset_work: Delayed work for handling a port reset
+ * @phy_reset_work: Work structure for doing a PHY reset
* @otg_port: OTG port number
* @frame_list: Frame list
* @frame_list_dma: Frame list DMA address
@@ -1045,6 +1048,7 @@ struct dwc2_hsotg {
unsigned int gadget_enabled:1;
unsigned int ll_hw_enabled:1;
unsigned int hibernated:1;
+ unsigned int reset_phy_on_wake:1;
u16 frame_number;
struct phy *phy;
@@ -1147,6 +1151,7 @@ struct dwc2_hsotg {
struct delayed_work start_work;
struct delayed_work reset_work;
+ struct work_struct phy_reset_work;
u8 otg_port;
u32 *frame_list;
dma_addr_t frame_list_dma;
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 19ae2595f1c3..16ff33574116 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -435,6 +435,18 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
/* Restart the Phy Clock */
pcgcctl &= ~PCGCTL_STOPPCLK;
dwc2_writel(hsotg, pcgcctl, PCGCTL);
+
+ /*
+ * If we've got this quirk then the PHY is stuck upon
+ * wakeup. Assert reset. This will propagate out and
+ * eventually we'll re-enumerate the device. Not great
+ * but the best we can do. We can't call phy_reset()
+ * at interrupt time but there's no hurry, so we'll
+ * schedule it for later.
+ */
+ if (hsotg->reset_phy_on_wake)
+ schedule_work(&hsotg->phy_reset_work);
+
mod_timer(&hsotg->wkp_timer,
jiffies + msecs_to_jiffies(71));
} else {
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 3f087962f498..e272d020012e 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -4376,6 +4376,17 @@ static void dwc2_hcd_reset_func(struct work_struct *work)
spin_unlock_irqrestore(&hsotg->lock, flags);
}
+static void dwc2_hcd_phy_reset_func(struct work_struct *work)
+{
+ struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+ phy_reset_work);
+ int ret;
+
+ ret = phy_reset(hsotg->phy);
+ if (ret)
+ dev_warn(hsotg->dev, "PHY reset failed\n");
+}
+
/*
* =========================================================================
* Linux HC Driver Functions
@@ -5130,6 +5141,8 @@ static void dwc2_hcd_free(struct dwc2_hsotg *hsotg)
destroy_workqueue(hsotg->wq_otg);
}
+ cancel_work_sync(&hsotg->phy_reset_work);
+
del_timer(&hsotg->wkp_timer);
}
@@ -5271,11 +5284,10 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
hsotg->hc_ptr_array[i] = channel;
}
- /* Initialize hsotg start work */
+ /* Initialize work */
INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func);
-
- /* Initialize port reset work */
INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func);
+ INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func);
/*
* Allocate space for storing data on status transactions. Normally no
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index c0b64d483552..9b65b766e0b9 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -481,6 +481,15 @@ static int dwc2_driver_probe(struct platform_device *dev)
hsotg->gadget_enabled = 1;
}
+ hsotg->reset_phy_on_wake =
+ of_property_read_bool(dev->dev.of_node,
+ "snps,reset-phy-on-wake");
+ if (hsotg->reset_phy_on_wake && !hsotg->phy) {
+ dev_warn(hsotg->dev,
+ "Quirk reset-phy-on-wake only supports generic PHYs\n");
+ hsotg->reset_phy_on_wake = false;
+ }
+
if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
retval = dwc2_hcd_init(hsotg);
if (retval) {
--
2.21.0.593.g511ec345e18-goog
Powered by blists - more mailing lists