linux-kernel - [PATCH v10] Add basic and clock support for Mediatek MT8183 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1555402331-5343-1-git-send-email-erin.lo@mediatek.com>
Date:   Tue, 16 Apr 2019 16:12:10 +0800
From:   Erin Lo <erin.lo@...iatek.com>
To:     Matthias Brugger <matthias.bgg@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
CC:     <devicetree@...r.kernel.org>,
        srv_heupstream <srv_heupstream@...iatek.com>,
        <linux-kernel@...r.kernel.org>, <linux-serial@...r.kernel.org>,
        <linux-mediatek@...ts.infradead.org>,
        <linux-arm-kernel@...ts.infradead.org>, <erin.lo@...iatek.com>,
        <mars.cheng@...iatek.com>, <eddie.huang@...iatek.com>
Subject: [PATCH v10] Add basic and clock support for Mediatek MT8183 SoC

MT8183 is a SoC based on 64bit ARMv8 architecture.
It contains 4 CA53 and 4 CA73 cores.
MT8183 share many HW IP with MT65xx series.
This patchset was tested on MT8183 evaluation board and use correct clock to shell.

Based on v5.1-rc1 and
http://lists.infradead.org/pipermail/linux-mediatek/2019-March/017963.html

Change in v10:
Add the L2 cache node to prevent warning on unable to detect cache
hierarchy.

Change in v9:
Remove pio node since binding is not documented yet

Change in v8:
1. Fix interrupt-parent of pio node
2. Remove pinfunc.h and spi node patches

Change in v7:
1. Place all the MMIO peripherals under one or more simple-bus nodes
2. Make the pinfunc.h and spi node into seperate patch
3. Modify SPIs pamerater from 4 back to 3
   and remove patch "support 4 interrupt parameters for sysirq"
4. Rename intpol-controller to interrupt-controller
5. Rename pinctrl@...0b000 to pinctrl@...05000

Change in v6:
1. Remove power and iommu nodes
2. Fix dtb build warning
3. Fix pinctrl binding doc
4. Fix '_' in node names

Change in v5:
1. Collect all device tree nodes to the last patch
2. Add PMU
3. Add Signed-off-by
4. Remove clock driver code and binding doc
5. Add pinctrl, iommu, spi, and pwrap nodes

Change in v4:
1. Correct syntax error in dtsi
2. Add MT8183 clock support

Change in v3:
1. Fill out GICC, GICH, GICV regions
2. Update Copyright to 2018

Change in v2:
1. Split dt-bindings into different patches
2. Correct bindings for supported SoCs (mtk-uart.txt)

Ben Ho (1):
  arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
    Makefile

 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts |  31 +++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi    | 329 ++++++++++++++++++++++++++++
 3 files changed, 361 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183.dtsi

--
1.9.1