[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ccaf5077-4fb8-847c-d8b6-6e8a25f27660@nvidia.com>
Date: Tue, 16 Apr 2019 19:59:12 +0530
From: Vidya Sagar <vidyas@...dia.com>
To: Thierry Reding <thierry.reding@...il.com>
CC: <bhelgaas@...gle.com>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <jonathanh@...dia.com>, <kishon@...com>,
<catalin.marinas@....com>, <will.deacon@....com>,
<lorenzo.pieralisi@....com>, <jingoohan1@...il.com>,
<gustavo.pimentel@...opsys.com>, <mperttunen@...dia.com>,
<linux-pci@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <kthota@...dia.com>,
<mmaddireddy@...dia.com>, <sagar.tv@...il.com>
Subject: Re: [PATCH V2 07/16] dt-bindings: PCI: designware: Add binding for
CDM register check
On 4/15/2019 8:24 PM, Thierry Reding wrote:
> On Fri, Apr 05, 2019 at 01:24:34AM +0530, Vidya Sagar wrote:
>> Add support to enable CDM (Configuration Dependent Module) registers check
>> for any data corruption. CDM registers include standard PCIe configuration
>> space registers, Port Logic registers and iATU and DMA registers.
>> Refer Section S.4 of Synopsys DesignWare Cores PCI Express Controller Databook
>> Version 4.90a
>>
>> Signed-off-by: Vidya Sagar <vidyas@...dia.com>
>> ---
>> Changes since [v1]:
>> * This is a new patch in v2 series
>>
>> Documentation/devicetree/bindings/pci/designware-pcie.txt | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> index c124f9bc11f3..728281b5bcd5 100644
>> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> @@ -31,6 +31,10 @@ Optional properties:
>> - clock-names: Must include the following entries:
>> - "pcie"
>> - "pcie_bus"
>> +- cdm-check: This is a boolean property and if present enables automatic
>> + checking of CDM (Configuration Dependent Module) registers for data
>> + corruption. CDM registers include configuration space registers and iATU
>> + (internal Address Translation Unit) registers.
>
> By comparison the commit message also lists "Port Logic" and "DMA"
> registers as being part of the CDM registers. Shouldn't they be part of
> the bindings document as well?
Ok. I'll add them in V3 patch series.
>
> Perhaps it'd also be a good idea to rename this property to something
> more imperative, like "enable-cdm" or similar.
Ok. I'll go with "enable-cdm-check". I hope that should be fine.
>
> Thierry
>
>> RC mode:
>> - num-viewport: number of view ports configured in hardware. If a platform
>> does not specify it, the driver assumes 2.
>> --
>> 2.7.4
>>
Powered by blists - more mailing lists