| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <28364c5fbae3e857d5d6b44c13b97b6d0d78e14d.1555382110.git.mchehab+samsung@kernel.org>
Date: Mon, 15 Apr 2019 23:55:29 -0300
From: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>
To: Linux Doc Mailing List <linux-doc@...r.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Mauro Carvalho Chehab <mchehab@...radead.org>,
linux-kernel@...r.kernel.org, Jonathan Corbet <corbet@....net>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 04/57] docs: arm64: convert documentation to ReST format
The documentation is in pretty much ReST format. Just some
small adjustments in order to fix tables and to make Sphinx
to recognize certain format blocks are required.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>
---
Documentation/arm64/acpi_object_usage.txt | 288 ++++++++++++------
Documentation/arm64/arm-acpi.txt | 153 +++++-----
Documentation/arm64/booting.txt | 91 ++++--
Documentation/arm64/cpu-feature-registers.txt | 190 ++++++------
Documentation/arm64/elf_hwcaps.txt | 50 +--
Documentation/arm64/hugetlbpage.txt | 7 +-
Documentation/arm64/legacy_instructions.txt | 43 ++-
Documentation/arm64/memory.txt | 91 +++---
.../arm64/pointer-authentication.txt | 2 +
Documentation/arm64/silicon-errata.txt | 63 +++-
Documentation/arm64/sve.txt | 10 +-
Documentation/arm64/tagged-pointers.txt | 6 +-
arch/arm64/kernel/kexec_image.c | 2 +-
13 files changed, 595 insertions(+), 401 deletions(-)
diff --git a/Documentation/arm64/acpi_object_usage.txt b/Documentation/arm64/acpi_object_usage.txt
index c77010c5c1f0..d51b69dc624d 100644
--- a/Documentation/arm64/acpi_object_usage.txt
+++ b/Documentation/arm64/acpi_object_usage.txt
@@ -1,5 +1,7 @@
+===========
ACPI Tables
------------
+===========
+
The expectations of individual ACPI tables are discussed in the list that
follows.
@@ -11,54 +13,71 @@ outside of the UEFI Forum (see Section 5.2.6 of the specification).
For ACPI on arm64, tables also fall into the following categories:
- -- Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
+ - Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
- -- Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
+ - Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
- -- Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT,
+ - Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT,
MCHI, MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT, STAO,
TCPA, TPM2, UEFI, XENV
- -- Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT,
+ - Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT,
MSDM, OEMx, PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT
+====== ========================================================================
Table Usage for ARMv8 Linux
------ ----------------------------------------------------------------
+====== ========================================================================
BERT Section 18.3 (signature == "BERT")
- == Boot Error Record Table ==
+
+ **Boot Error Record Table**
+
Must be supplied if RAS support is provided by the platform. It
is recommended this table be supplied.
BOOT Signature Reserved (signature == "BOOT")
- == simple BOOT flag table ==
+
+ **simple BOOT flag table**
+
Microsoft only table, will not be supported.
BGRT Section 5.2.22 (signature == "BGRT")
- == Boot Graphics Resource Table ==
+
+ **Boot Graphics Resource Table**
+
Optional, not currently supported, with no real use-case for an
ARM server.
CPEP Section 5.2.18 (signature == "CPEP")
- == Corrected Platform Error Polling table ==
+
+ **Corrected Platform Error Polling table**
+
Optional, not currently supported, and not recommended until such
time as ARM-compatible hardware is available, and the specification
suitably modified.
CSRT Signature Reserved (signature == "CSRT")
- == Core System Resources Table ==
+
+ **Core System Resources Table**
+
Optional, not currently supported.
DBG2 Signature Reserved (signature == "DBG2")
- == DeBuG port table 2 ==
+
+ **DeBuG port table 2**
+
License has changed and should be usable. Optional if used instead
of earlycon=<device> on the command line.
DBGP Signature Reserved (signature == "DBGP")
- == DeBuG Port table ==
+
+ **DeBuG Port table**
+
Microsoft only table, will not be supported.
DSDT Section 5.2.11.1 (signature == "DSDT")
- == Differentiated System Description Table ==
+
+ **Differentiated System Description Table**
+
A DSDT is required; see also SSDT.
ACPI tables contain only one DSDT but can contain one or more SSDTs,
@@ -66,22 +85,30 @@ DSDT Section 5.2.11.1 (signature == "DSDT")
but cannot modify or replace anything in the DSDT.
DMAR Signature Reserved (signature == "DMAR")
- == DMA Remapping table ==
+
+ **DMA Remapping table**
+
x86 only table, will not be supported.
DRTM Signature Reserved (signature == "DRTM")
- == Dynamic Root of Trust for Measurement table ==
+
+ **Dynamic Root of Trust for Measurement table**
+
Optional, not currently supported.
ECDT Section 5.2.16 (signature == "ECDT")
- == Embedded Controller Description Table ==
+
+ **Embedded Controller Description Table**
+
Optional, not currently supported, but could be used on ARM if and
only if one uses the GPE_BIT field to represent an IRQ number, since
there are no GPE blocks defined in hardware reduced mode. This would
need to be modified in the ACPI specification.
EINJ Section 18.6 (signature == "EINJ")
- == Error Injection table ==
+
+ **Error Injection table**
+
This table is very useful for testing platform response to error
conditions; it allows one to inject an error into the system as
if it had actually occurred. However, this table should not be
@@ -89,27 +116,35 @@ EINJ Section 18.6 (signature == "EINJ")
and executed with the ACPICA tools only during testing.
ERST Section 18.5 (signature == "ERST")
- == Error Record Serialization Table ==
+
+ **Error Record Serialization Table**
+
On a platform supports RAS, this table must be supplied if it is not
UEFI-based; if it is UEFI-based, this table may be supplied. When this
table is not present, UEFI run time service will be utilized to save
and retrieve hardware error information to and from a persistent store.
ETDT Signature Reserved (signature == "ETDT")
- == Event Timer Description Table ==
+
+ **Event Timer Description Table**
+
Obsolete table, will not be supported.
FACS Section 5.2.10 (signature == "FACS")
- == Firmware ACPI Control Structure ==
+
+ **Firmware ACPI Control Structure**
+
It is unlikely that this table will be terribly useful. If it is
provided, the Global Lock will NOT be used since it is not part of
the hardware reduced profile, and only 64-bit address fields will
be considered valid.
FADT Section 5.2.9 (signature == "FACP")
- == Fixed ACPI Description Table ==
+
+ **Fixed ACPI Description Table**
Required for arm64.
+
The HW_REDUCED_ACPI flag must be set. All of the fields that are
to be ignored when HW_REDUCED_ACPI is set are expected to be set to
zero.
@@ -118,22 +153,28 @@ FADT Section 5.2.9 (signature == "FACP")
used, not FIRMWARE_CTRL.
If PSCI is used (as is recommended), make sure that ARM_BOOT_ARCH is
- filled in properly -- that the PSCI_COMPLIANT flag is set and that
+ filled in properly - that the PSCI_COMPLIANT flag is set and that
PSCI_USE_HVC is set or unset as needed (see table 5-37).
For the DSDT that is also required, the X_DSDT field is to be used,
not the DSDT field.
FPDT Section 5.2.23 (signature == "FPDT")
- == Firmware Performance Data Table ==
+
+ **Firmware Performance Data Table**
+
Optional, not currently supported.
GTDT Section 5.2.24 (signature == "GTDT")
- == Generic Timer Description Table ==
+
+ **Generic Timer Description Table**
+
Required for arm64.
HEST Section 18.3.2 (signature == "HEST")
- == Hardware Error Source Table ==
+
+ **Hardware Error Source Table**
+
ARM-specific error sources have been defined; please use those or the
PCI types such as type 6 (AER Root Port), 7 (AER Endpoint), or 8 (AER
Bridge), or use type 9 (Generic Hardware Error Source). Firmware first
@@ -144,122 +185,174 @@ HEST Section 18.3.2 (signature == "HEST")
is recommended this table be supplied.
HPET Signature Reserved (signature == "HPET")
- == High Precision Event timer Table ==
+
+ **High Precision Event timer Table**
+
x86 only table, will not be supported.
IBFT Signature Reserved (signature == "IBFT")
- == iSCSI Boot Firmware Table ==
+
+ **iSCSI Boot Firmware Table**
+
Microsoft defined table, support TBD.
IORT Signature Reserved (signature == "IORT")
- == Input Output Remapping Table ==
+
+ **Input Output Remapping Table**
+
arm64 only table, required in order to describe IO topology, SMMUs,
and GIC ITSs, and how those various components are connected together,
such as identifying which components are behind which SMMUs/ITSs.
This table will only be required on certain SBSA platforms (e.g.,
- when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
+ when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
remains optional.
IVRS Signature Reserved (signature == "IVRS")
- == I/O Virtualization Reporting Structure ==
+
+ **I/O Virtualization Reporting Structure**
+
x86_64 (AMD) only table, will not be supported.
LPIT Signature Reserved (signature == "LPIT")
- == Low Power Idle Table ==
+
+ **Low Power Idle Table**
+
x86 only table as of ACPI 5.1; starting with ACPI 6.0, processor
descriptions and power states on ARM platforms should use the DSDT
and define processor container devices (_HID ACPI0010, Section 8.4,
and more specifically 8.4.3 and and 8.4.4).
MADT Section 5.2.12 (signature == "APIC")
- == Multiple APIC Description Table ==
+
+ **Multiple APIC Description Table**
+
Required for arm64. Only the GIC interrupt controller structures
should be used (types 0xA - 0xF).
MCFG Signature Reserved (signature == "MCFG")
- == Memory-mapped ConFiGuration space ==
+
+ **Memory-mapped ConFiGuration space**
+
If the platform supports PCI/PCIe, an MCFG table is required.
MCHI Signature Reserved (signature == "MCHI")
- == Management Controller Host Interface table ==
+
+ **Management Controller Host Interface table**
+
Optional, not currently supported.
MPST Section 5.2.21 (signature == "MPST")
- == Memory Power State Table ==
+
+ **Memory Power State Table**
+
Optional, not currently supported.
MSCT Section 5.2.19 (signature == "MSCT")
- == Maximum System Characteristic Table ==
+
+ **Maximum System Characteristic Table**
+
Optional, not currently supported.
MSDM Signature Reserved (signature == "MSDM")
- == Microsoft Data Management table ==
+
+ **Microsoft Data Management table**
+
Microsoft only table, will not be supported.
NFIT Section 5.2.25 (signature == "NFIT")
- == NVDIMM Firmware Interface Table ==
+
+ **NVDIMM Firmware Interface Table**
+
Optional, not currently supported.
OEMx Signature of "OEMx" only
- == OEM Specific Tables ==
+
+ **OEM Specific Tables**
+
All tables starting with a signature of "OEM" are reserved for OEM
use. Since these are not meant to be of general use but are limited
to very specific end users, they are not recommended for use and are
not supported by the kernel for arm64.
PCCT Section 14.1 (signature == "PCCT)
- == Platform Communications Channel Table ==
+
+ **Platform Communications Channel Table**
+
Recommend for use on arm64; use of PCC is recommended when using CPPC
to control performance and power for platform processors.
PMTT Section 5.2.21.12 (signature == "PMTT")
- == Platform Memory Topology Table ==
+
+ **Platform Memory Topology Table**
+
Optional, not currently supported.
PSDT Section 5.2.11.3 (signature == "PSDT")
- == Persistent System Description Table ==
+
+ **Persistent System Description Table**
+
Obsolete table, will not be supported.
RASF Section 5.2.20 (signature == "RASF")
- == RAS Feature table ==
+
+ **RAS Feature table**
+
Optional, not currently supported.
RSDP Section 5.2.5 (signature == "RSD PTR")
- == Root System Description PoinTeR ==
+
+ **Root System Description PoinTeR**
+
Required for arm64.
RSDT Section 5.2.7 (signature == "RSDT")
- == Root System Description Table ==
+
+ **Root System Description Table**
+
Since this table can only provide 32-bit addresses, it is deprecated
on arm64, and will not be used. If provided, it will be ignored.
SBST Section 5.2.14 (signature == "SBST")
- == Smart Battery Subsystem Table ==
+
+ **Smart Battery Subsystem Table**
+
Optional, not currently supported.
SLIC Signature Reserved (signature == "SLIC")
- == Software LIcensing table ==
+
+ **Software LIcensing table**
+
Microsoft only table, will not be supported.
SLIT Section 5.2.17 (signature == "SLIT")
- == System Locality distance Information Table ==
+
+ **System Locality distance Information Table**
+
Optional in general, but required for NUMA systems.
SPCR Signature Reserved (signature == "SPCR")
- == Serial Port Console Redirection table ==
+
+ **Serial Port Console Redirection table**
+
Required for arm64.
SPMI Signature Reserved (signature == "SPMI")
- == Server Platform Management Interface table ==
+
+ **Server Platform Management Interface table**
+
Optional, not currently supported.
SRAT Section 5.2.16 (signature == "SRAT")
- == System Resource Affinity Table ==
+
+ **System Resource Affinity Table**
+
Optional, but if used, only the GICC Affinity structures are read.
To support arm64 NUMA, this table is required.
SSDT Section 5.2.11.2 (signature == "SSDT")
- == Secondary System Description Table ==
+
+ **Secondary System Description Table**
+
These tables are a continuation of the DSDT; these are recommended
for use with devices that can be added to a running system, but can
also serve the purpose of dividing up device descriptions into more
@@ -272,49 +365,69 @@ SSDT Section 5.2.11.2 (signature == "SSDT")
one DSDT but can contain many SSDTs.
STAO Signature Reserved (signature == "STAO")
- == _STA Override table ==
+
+ **_STA Override table**
+
Optional, but only necessary in virtualized environments in order to
hide devices from guest OSs.
TCPA Signature Reserved (signature == "TCPA")
- == Trusted Computing Platform Alliance table ==
+
+ **Trusted Computing Platform Alliance table**
+
Optional, not currently supported, and may need changes to fully
interoperate with arm64.
TPM2 Signature Reserved (signature == "TPM2")
- == Trusted Platform Module 2 table ==
+
+ **Trusted Platform Module 2 table**
+
Optional, not currently supported, and may need changes to fully
interoperate with arm64.
UEFI Signature Reserved (signature == "UEFI")
- == UEFI ACPI data table ==
+
+ **UEFI ACPI data table**
+
Optional, not currently supported. No known use case for arm64,
at present.
WAET Signature Reserved (signature == "WAET")
- == Windows ACPI Emulated devices Table ==
+
+ **Windows ACPI Emulated devices Table**
+
Microsoft only table, will not be supported.
WDAT Signature Reserved (signature == "WDAT")
- == Watch Dog Action Table ==
+
+ **Watch Dog Action Table**
+
Microsoft only table, will not be supported.
WDRT Signature Reserved (signature == "WDRT")
- == Watch Dog Resource Table ==
+
+ **Watch Dog Resource Table**
+
Microsoft only table, will not be supported.
WPBT Signature Reserved (signature == "WPBT")
- == Windows Platform Binary Table ==
+
+ **Windows Platform Binary Table**
+
Microsoft only table, will not be supported.
XENV Signature Reserved (signature == "XENV")
- == Xen project table ==
+
+ **Xen project table**
+
Optional, used only by Xen at present.
XSDT Section 5.2.8 (signature == "XSDT")
- == eXtended System Description Table ==
+
+ **eXtended System Description Table**
+
Required for arm64.
-
+====== ========================================================================
ACPI Objects
------------
@@ -323,10 +436,11 @@ shown in the list that follows; any object not explicitly mentioned below
should be used as needed for a particular platform or particular subsystem,
such as power management or PCI.
+===== ================ ========================================================
Name Section Usage for ARMv8 Linux
----- ------------ -------------------------------------------------
+===== ================ ========================================================
_CCA 6.2.17 This method must be defined for all bus masters
- on arm64 -- there are no assumptions made about
+ on arm64 - there are no assumptions made about
whether such devices are cache coherent or not.
The _CCA value is inherited by all descendants of
these devices so it does not need to be repeated.
@@ -422,8 +536,8 @@ _OSC 6.2.11 This method can be a global method in ACPI (i.e.,
by the kernel community, then register it with the
UEFI Forum.
-\_OSI 5.7.2 Deprecated on ARM64. As far as ACPI firmware is
- concerned, _OSI is not to be used to determine what
+\_OSI 5.7.2 Deprecated on ARM64. As far as ACPI firmware is
+ concerned, _OSI is not to be used to determine what
sort of system is being used or what functionality
is provided. The _OSC method is to be used instead.
@@ -447,7 +561,7 @@ _PSx 7.3.2-5 Use as needed; power management specific. If _PS0 is
usage, change them in these methods.
_RDI 8.4.4.4 Recommended for use with processor definitions (_HID
- ACPI0010) on arm64. This should only be used in
+ ACPI0010) on arm64. This should only be used in
conjunction with _LPI.
\_REV 5.7.4 Always returns the latest version of ACPI supported.
@@ -476,6 +590,7 @@ _SWS 7.4.3 Use as needed; power management specific; this may
_UID 6.1.12 Recommended for distinguishing devices of the same
class; define it if at all possible.
+===== ================ ========================================================
@@ -488,7 +603,7 @@ platforms, ACPI events must be signaled differently.
There are two options: GPIO-signaled interrupts (Section 5.6.5), and
interrupt-signaled events (Section 5.6.9). Interrupt-signaled events are a
-new feature in the ACPI 6.1 specification. Either -- or both -- can be used
+new feature in the ACPI 6.1 specification. Either - or both - can be used
on a given platform, and which to use may be dependent of limitations in any
given SoC. If possible, interrupt-signaled events are recommended.
@@ -564,39 +679,40 @@ supported.
The following classes of objects are not supported:
- -- Section 9.2: ambient light sensor devices
+ - Section 9.2: ambient light sensor devices
- -- Section 9.3: battery devices
+ - Section 9.3: battery devices
- -- Section 9.4: lids (e.g., laptop lids)
+ - Section 9.4: lids (e.g., laptop lids)
- -- Section 9.8.2: IDE controllers
+ - Section 9.8.2: IDE controllers
- -- Section 9.9: floppy controllers
+ - Section 9.9: floppy controllers
- -- Section 9.10: GPE block devices
+ - Section 9.10: GPE block devices
- -- Section 9.15: PC/AT RTC/CMOS devices
+ - Section 9.15: PC/AT RTC/CMOS devices
- -- Section 9.16: user presence detection devices
+ - Section 9.16: user presence detection devices
- -- Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
+ - Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
- -- Section 9.18: time and alarm devices (see 9.15)
+ - Section 9.18: time and alarm devices (see 9.15)
- -- Section 10: power source and power meter devices
+ - Section 10: power source and power meter devices
- -- Section 11: thermal management
+ - Section 11: thermal management
- -- Section 12: embedded controllers interface
+ - Section 12: embedded controllers interface
- -- Section 13: SMBus interfaces
+ - Section 13: SMBus interfaces
This also means that there is no support for the following objects:
+==== =========================== ==== ==========
Name Section Name Section
----- ------------ ---- ------------
+==== =========================== ==== ==========
_ALC 9.3.4 _FDM 9.10.3
_ALI 9.3.2 _FIX 6.2.7
_ALP 9.3.6 _GAI 10.4.5
@@ -619,4 +735,4 @@ _DCK 6.5.2 _UPD 9.16.1
_EC 12.12 _UPP 9.16.2
_FDE 9.10.1 _WPC 10.5.2
_FDI 9.10.2 _WPP 10.5.3
-
+==== =========================== ==== ==========
diff --git a/Documentation/arm64/arm-acpi.txt b/Documentation/arm64/arm-acpi.txt
index 1a74a041a443..f9341b71344b 100644
--- a/Documentation/arm64/arm-acpi.txt
+++ b/Documentation/arm64/arm-acpi.txt
@@ -1,5 +1,7 @@
+=====================
ACPI on ARMv8 Servers
----------------------
+=====================
+
ACPI can be used for ARMv8 general purpose servers designed to follow
the ARM SBSA (Server Base System Architecture) [0] and SBBR (Server
Base Boot Requirements) [1] specifications. Please note that the SBBR
@@ -34,28 +36,28 @@ of the summary text almost directly, to be honest.
The short form of the rationale for ACPI on ARM is:
--- ACPI’s byte code (AML) allows the platform to encode hardware behavior,
+- ACPI’s byte code (AML) allows the platform to encode hardware behavior,
while DT explicitly does not support this. For hardware vendors, being
able to encode behavior is a key tool used in supporting operating
system releases on new hardware.
--- ACPI’s OSPM defines a power management model that constrains what the
+- ACPI’s OSPM defines a power management model that constrains what the
platform is allowed to do into a specific model, while still providing
flexibility in hardware design.
--- In the enterprise server environment, ACPI has established bindings (such
+- In the enterprise server environment, ACPI has established bindings (such
as for RAS) which are currently used in production systems. DT does not.
Such bindings could be defined in DT at some point, but doing so means ARM
and x86 would end up using completely different code paths in both firmware
and the kernel.
--- Choosing a single interface to describe the abstraction between a platform
+- Choosing a single interface to describe the abstraction between a platform
and an OS is important. Hardware vendors would not be required to implement
both DT and ACPI if they want to support multiple operating systems. And,
agreeing on a single interface instead of being fragmented into per OS
interfaces makes for better interoperability overall.
--- The new ACPI governance process works well and Linux is now at the same
+- The new ACPI governance process works well and Linux is now at the same
table as hardware vendors and other OS vendors. In fact, there is no
longer any reason to feel that ACPI only belongs to Windows or that
Linux is in any way secondary to Microsoft in this arena. The move of
@@ -169,31 +171,31 @@ For the ACPI core to operate properly, and in turn provide the information
the kernel needs to configure devices, it expects to find the following
tables (all section numbers refer to the ACPI 6.1 specification):
- -- RSDP (Root System Description Pointer), section 5.2.5
+ - RSDP (Root System Description Pointer), section 5.2.5
- -- XSDT (eXtended System Description Table), section 5.2.8
+ - XSDT (eXtended System Description Table), section 5.2.8
- -- FADT (Fixed ACPI Description Table), section 5.2.9
+ - FADT (Fixed ACPI Description Table), section 5.2.9
- -- DSDT (Differentiated System Description Table), section
+ - DSDT (Differentiated System Description Table), section
5.2.11.1
- -- MADT (Multiple APIC Description Table), section 5.2.12
+ - MADT (Multiple APIC Description Table), section 5.2.12
- -- GTDT (Generic Timer Description Table), section 5.2.24
+ - GTDT (Generic Timer Description Table), section 5.2.24
- -- If PCI is supported, the MCFG (Memory mapped ConFiGuration
+ - If PCI is supported, the MCFG (Memory mapped ConFiGuration
Table), section 5.2.6, specifically Table 5-31.
- -- If booting without a console=<device> kernel parameter is
+ - If booting without a console=<device> kernel parameter is
supported, the SPCR (Serial Port Console Redirection table),
section 5.2.6, specifically Table 5-31.
- -- If necessary to describe the I/O topology, SMMUs and GIC ITSs,
+ - If necessary to describe the I/O topology, SMMUs and GIC ITSs,
the IORT (Input Output Remapping Table, section 5.2.6, specifically
Table 5-31).
- -- If NUMA is supported, the SRAT (System Resource Affinity Table)
+ - If NUMA is supported, the SRAT (System Resource Affinity Table)
and SLIT (System Locality distance Information Table), sections
5.2.16 and 5.2.17, respectively.
@@ -269,9 +271,9 @@ describes how to define the structure of an object returned via _DSD, and
how specific data structures are defined by specific UUIDs. Linux should
only use the _DSD Device Properties UUID [5]:
- -- UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301
+ - UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301
- -- http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+ - http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
The UEFI Forum provides a mechanism for registering device properties [4]
so that they may be used across all operating systems supporting ACPI.
@@ -327,10 +329,10 @@ turning a device full off.
There are two options for using those Power Resources. They can:
- -- be managed in a _PSx method which gets called on entry to power
+ - be managed in a _PSx method which gets called on entry to power
state Dx.
- -- be declared separately as power resources with their own _ON and _OFF
+ - be declared separately as power resources with their own _ON and _OFF
methods. They are then tied back to D-states for a particular device
via _PRx which specifies which power resources a device needs to be on
while in Dx. Kernel then tracks number of devices using a power resource
@@ -339,16 +341,16 @@ There are two options for using those Power Resources. They can:
The kernel ACPI code will also assume that the _PSx methods follow the normal
ACPI rules for such methods:
- -- If either _PS0 or _PS3 is implemented, then the other method must also
+ - If either _PS0 or _PS3 is implemented, then the other method must also
be implemented.
- -- If a device requires usage or setup of a power resource when on, the ASL
+ - If a device requires usage or setup of a power resource when on, the ASL
should organize that it is allocated/enabled using the _PS0 method.
- -- Resources allocated or enabled in the _PS0 method should be disabled
+ - Resources allocated or enabled in the _PS0 method should be disabled
or de-allocated in the _PS3 method.
- -- Firmware will leave the resources in a reasonable state before handing
+ - Firmware will leave the resources in a reasonable state before handing
over control to the kernel.
Such code in _PSx methods will of course be very platform specific. But,
@@ -394,52 +396,52 @@ else must be discovered by the driver probe function. Then, have the rest
of the driver operate off of the contents of that struct. Doing so should
allow most divergence between ACPI and DT functionality to be kept local to
the probe function instead of being scattered throughout the driver. For
-example:
+example::
-static int device_probe_dt(struct platform_device *pdev)
-{
- /* DT specific functionality */
- ...
-}
+ static int device_probe_dt(struct platform_device *pdev)
+ {
+ /* DT specific functionality */
+ ...
+ }
-static int device_probe_acpi(struct platform_device *pdev)
-{
- /* ACPI specific functionality */
- ...
-}
+ static int device_probe_acpi(struct platform_device *pdev)
+ {
+ /* ACPI specific functionality */
+ ...
+ }
-static int device_probe(struct platform_device *pdev)
-{
- ...
- struct device_node node = pdev->dev.of_node;
- ...
+ static int device_probe(struct platform_device *pdev)
+ {
+ ...
+ struct device_node node = pdev->dev.of_node;
+ ...
- if (node)
- ret = device_probe_dt(pdev);
- else if (ACPI_HANDLE(&pdev->dev))
- ret = device_probe_acpi(pdev);
- else
- /* other initialization */
- ...
- /* Continue with any generic probe operations */
- ...
-}
+ if (node)
+ ret = device_probe_dt(pdev);
+ else if (ACPI_HANDLE(&pdev->dev))
+ ret = device_probe_acpi(pdev);
+ else
+ /* other initialization */
+ ...
+ /* Continue with any generic probe operations */
+ ...
+ }
DO keep the MODULE_DEVICE_TABLE entries together in the driver to make it
clear the different names the driver is probed for, both from DT and from
-ACPI:
+ACPI::
-static struct of_device_id virtio_mmio_match[] = {
- { .compatible = "virtio,mmio", },
- { }
-};
-MODULE_DEVICE_TABLE(of, virtio_mmio_match);
+ static struct of_device_id virtio_mmio_match[] = {
+ { .compatible = "virtio,mmio", },
+ { }
+ };
+ MODULE_DEVICE_TABLE(of, virtio_mmio_match);
-static const struct acpi_device_id virtio_mmio_acpi_match[] = {
- { "LNRO0005", },
- { }
-};
-MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match);
+ static const struct acpi_device_id virtio_mmio_acpi_match[] = {
+ { "LNRO0005", },
+ { }
+ };
+ MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match);
ASWG
@@ -471,7 +473,8 @@ Linux Code
Individual items specific to Linux on ARM, contained in the the Linux
source code, are in the list that follows:
-ACPI_OS_NAME This macro defines the string to be returned when
+ACPI_OS_NAME
+ This macro defines the string to be returned when
an ACPI method invokes the _OS method. On ARM64
systems, this macro will be "Linux" by default.
The command line parameter acpi_os=<string>
@@ -487,33 +490,39 @@ Documentation/arm64/acpi_object_usage.txt.
References
----------
-[0] http://silver.arm.com -- document ARM-DEN-0029, or newer
+[0] http://silver.arm.com
+ document ARM-DEN-0029, or newer:
"Server Base System Architecture", version 2.3, dated 27 Mar 2014
[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0044a/Server_Base_Boot_Requirements.pdf
Document ARM-DEN-0044A, or newer: "Server Base Boot Requirements, System
Software on ARM Platforms", dated 16 Aug 2014
-[2] http://www.secretlab.ca/archives/151, 10 Jan 2015, Copyright (c) 2015,
+[2] http://www.secretlab.ca/archives/151,
+ 10 Jan 2015, Copyright (c) 2015,
Linaro Ltd., written by Grant Likely.
-[3] AMD ACPI for Seattle platform documentation:
+[3] AMD ACPI for Seattle platform documentation
http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf
-[4] http://www.uefi.org/acpi -- please see the link for the "ACPI _DSD Device
+
+[4] http://www.uefi.org/acpi
+ please see the link for the "ACPI _DSD Device
Property Registry Instructions"
-[5] http://www.uefi.org/acpi -- please see the link for the "_DSD (Device
+[5] http://www.uefi.org/acpi
+ please see the link for the "_DSD (Device
Specific Data) Implementation Guide"
-[6] Kernel code for the unified device property interface can be found in
+[6] Kernel code for the unified device
+ property interface can be found in
include/linux/property.h and drivers/base/property.c.
Authors
-------
-Al Stone <al.stone@...aro.org>
-Graeme Gregory <graeme.gregory@...aro.org>
-Hanjun Guo <hanjun.guo@...aro.org>
+- Al Stone <al.stone@...aro.org>
+- Graeme Gregory <graeme.gregory@...aro.org>
+- Hanjun Guo <hanjun.guo@...aro.org>
-Grant Likely <grant.likely@...aro.org>, for the "Why ACPI on ARM?" section
+- Grant Likely <grant.likely@...aro.org>, for the "Why ACPI on ARM?" section
diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt
index fbab7e21d116..3d041d0d16e8 100644
--- a/Documentation/arm64/booting.txt
+++ b/Documentation/arm64/booting.txt
@@ -1,7 +1,9 @@
- Booting AArch64 Linux
- =====================
+=====================
+Booting AArch64 Linux
+=====================
Author: Will Deacon <will.deacon@....com>
+
Date : 07 September 2012
This document is based on the ARM booting document by Russell King and
@@ -12,7 +14,7 @@ The AArch64 exception model is made up of a number of exception levels
counterpart. EL2 is the hypervisor level and exists only in non-secure
mode. EL3 is the highest priority level and exists only in secure mode.
-For the purposes of this document, we will use the term `boot loader'
+For the purposes of this document, we will use the term `boot loader`
simply to define all software that executes on the CPU(s) before control
is passed to the Linux kernel. This may include secure monitor and
hypervisor code, or it may just be a handful of instructions for
@@ -70,7 +72,7 @@ Image target is available instead.
Requirement: MANDATORY
-The decompressed kernel image contains a 64-byte header as follows:
+The decompressed kernel image contains a 64-byte header as follows::
u32 code0; /* Executable code */
u32 code1; /* Executable code */
@@ -103,19 +105,26 @@ Header notes:
- The flags field (introduced in v3.17) is a little-endian 64-bit field
composed as follows:
- Bit 0: Kernel endianness. 1 if BE, 0 if LE.
- Bit 1-2: Kernel Page size.
- 0 - Unspecified.
- 1 - 4K
- 2 - 16K
- 3 - 64K
- Bit 3: Kernel physical placement
- 0 - 2MB aligned base should be as close as possible
- to the base of DRAM, since memory below it is not
- accessible via the linear mapping
- 1 - 2MB aligned base may be anywhere in physical
- memory
- Bits 4-63: Reserved.
+
+ ============= ===============================================================
+ Bit 0 Kernel endianness. 1 if BE, 0 if LE.
+ Bit 1-2 Kernel Page size.
+
+ * 0 - Unspecified.
+ * 1 - 4K
+ * 2 - 16K
+ * 3 - 64K
+ Bit 3 Kernel physical placement
+
+ 0
+ 2MB aligned base should be as close as possible
+ to the base of DRAM, since memory below it is not
+ accessible via the linear mapping
+ 1
+ 2MB aligned base may be anywhere in physical
+ memory
+ Bits 4-63 Reserved.
+ ============= ===============================================================
- When image_size is zero, a bootloader should attempt to keep as much
memory as possible free for use by the kernel immediately after the
@@ -147,19 +156,22 @@ Before jumping into the kernel, the following conditions must be met:
corrupted by bogus network packets or disk data. This will save
you many hours of debug.
-- Primary CPU general-purpose register settings
- x0 = physical address of device tree blob (dtb) in system RAM.
- x1 = 0 (reserved for future use)
- x2 = 0 (reserved for future use)
- x3 = 0 (reserved for future use)
+- Primary CPU general-purpose register settings:
+
+ - x0 = physical address of device tree blob (dtb) in system RAM.
+ - x1 = 0 (reserved for future use)
+ - x2 = 0 (reserved for future use)
+ - x3 = 0 (reserved for future use)
- CPU mode
+
All forms of interrupts must be masked in PSTATE.DAIF (Debug, SError,
IRQ and FIQ).
The CPU must be in either EL2 (RECOMMENDED in order to have access to
the virtualisation extensions) or non-secure EL1.
- Caches, MMUs
+
The MMU must be off.
Instruction cache may be on or off.
The address range corresponding to the loaded kernel image must be
@@ -172,18 +184,21 @@ Before jumping into the kernel, the following conditions must be met:
operations (not recommended) must be configured and disabled.
- Architected timers
+
CNTFRQ must be programmed with the timer frequency and CNTVOFF must
be programmed with a consistent value on all CPUs. If entering the
kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) set where
available.
- Coherency
+
All CPUs to be booted by the kernel must be part of the same coherency
domain on entry to the kernel. This may require IMPLEMENTATION DEFINED
initialisation to enable the receiving of maintenance operations on
each CPU.
- System registers
+
All writable architected system registers at the exception level where
the kernel image will be entered must be initialised by software at a
higher exception level to prevent execution in an UNKNOWN state.
@@ -195,28 +210,40 @@ Before jumping into the kernel, the following conditions must be met:
For systems with a GICv3 interrupt controller to be used in v3 mode:
- If EL3 is present:
- ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
- ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
+
+ - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
+ - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
+
- If the kernel is entered at EL1:
- ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1
- ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1.
+
+ - ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1
+ - ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1.
+
- The DT or ACPI tables must describe a GICv3 interrupt controller.
For systems with a GICv3 interrupt controller to be used in
compatibility (v2) mode:
+
- If EL3 is present:
- ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b0.
+
+ ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b0.
+
- If the kernel is entered at EL1:
- ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b0.
+
+ ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b0.
+
- The DT or ACPI tables must describe a GICv2 interrupt controller.
For CPUs with pointer authentication functionality:
- If EL3 is present:
- SCR_EL3.APK (bit 16) must be initialised to 0b1
- SCR_EL3.API (bit 17) must be initialised to 0b1
+
+ - SCR_EL3.APK (bit 16) must be initialised to 0b1
+ - SCR_EL3.API (bit 17) must be initialised to 0b1
+
- If the kernel is entered at EL1:
- HCR_EL2.APK (bit 40) must be initialised to 0b1
- HCR_EL2.API (bit 41) must be initialised to 0b1
+
+ - HCR_EL2.APK (bit 40) must be initialised to 0b1
+ - HCR_EL2.API (bit 41) must be initialised to 0b1
The requirements described above for CPU mode, caches, MMUs, architected
timers, coherency and system registers apply to all CPUs. All CPUs must
diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt
index d4b4dd1fe786..251174aaa8ea 100644
--- a/Documentation/arm64/cpu-feature-registers.txt
+++ b/Documentation/arm64/cpu-feature-registers.txt
@@ -1,5 +1,6 @@
- ARM64 CPU Feature Registers
- ===========================
+===========================
+ARM64 CPU Feature Registers
+===========================
Author: Suzuki K Poulose <suzuki.poulose@....com>
@@ -9,7 +10,7 @@ registers to userspace. The availability of this ABI is advertised
via the HWCAP_CPUID in HWCAPs.
1. Motivation
----------------
+-------------
The ARM architecture defines a set of feature registers, which describe
the capabilities of the CPU/system. Access to these system registers is
@@ -33,9 +34,10 @@ there are some issues with their usage.
2. Requirements
------------------
+---------------
+
+ a) Safety:
- a) Safety :
Applications should be able to use the information provided by the
infrastructure to run safely across the system. This has greater
implications on a system with heterogeneous CPUs.
@@ -47,7 +49,8 @@ there are some issues with their usage.
Otherwise an application could crash when scheduled on the CPU
which doesn't support CRC32.
- b) Security :
+ b) Security:
+
Applications should only be able to receive information that is
relevant to the normal operation in userspace. Hence, some of the
fields are masked out(i.e, made invisible) and their values are set to
@@ -58,10 +61,12 @@ there are some issues with their usage.
(even when the CPU provides it).
c) Implementation Defined Features
+
The infrastructure doesn't expose any register which is
IMPLEMENTATION DEFINED as per ARMv8-A Architecture.
- d) CPU Identification :
+ d) CPU Identification:
+
MIDR_EL1 is exposed to help identify the processor. On a
heterogeneous system, this could be racy (just like getcpu()). The
process could be migrated to another CPU by the time it uses the
@@ -70,7 +75,7 @@ there are some issues with their usage.
currently executing on. The REVIDR is not exposed due to this
constraint, as REVIDR makes sense only in conjunction with the
MIDR. Alternately, MIDR_EL1 and REVIDR_EL1 are exposed via sysfs
- at:
+ at::
/sys/devices/system/cpu/cpu$ID/regs/identification/
\- midr
@@ -85,7 +90,8 @@ exception and ends up in SIGILL being delivered to the process.
The infrastructure hooks into the exception handler and emulates the
operation if the source belongs to the supported system register space.
-The infrastructure emulates only the following system register space:
+The infrastructure emulates only the following system register space::
+
Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7
(See Table C5-6 'System instruction encodings for non-Debug System
@@ -107,73 +113,76 @@ infrastructure:
-------------------------------------------
1) ID_AA64ISAR0_EL1 - Instruction Set Attribute Register 0
- x--------------------------------------------------x
+
+ +------------------------------+---------+---------+
| Name | bits | visible |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| TS | [55-52] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| FHM | [51-48] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| DP | [47-44] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| SM4 | [43-40] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| SM3 | [39-36] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| SHA3 | [35-32] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| RDM | [31-28] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| ATOMICS | [23-20] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| CRC32 | [19-16] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| SHA2 | [15-12] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| SHA1 | [11-8] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| AES | [7-4] | y |
- x--------------------------------------------------x
+ +------------------------------+---------+---------+
2) ID_AA64PFR0_EL1 - Processor Feature Register 0
- x--------------------------------------------------x
+
+ +------------------------------+---------+---------+
| Name | bits | visible |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| DIT | [51-48] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| SVE | [35-32] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| GIC | [27-24] | n |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| AdvSIMD | [23-20] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| FP | [19-16] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| EL3 | [15-12] | n |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| EL2 | [11-8] | n |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| EL1 | [7-4] | n |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| EL0 | [3-0] | n |
- x--------------------------------------------------x
+ +------------------------------+---------+---------+
3) MIDR_EL1 - Main ID Register
- x--------------------------------------------------x
+
+ +------------------------------+---------+---------+
| Name | bits | visible |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| Implementer | [31-24] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| Variant | [23-20] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| Architecture | [19-16] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| PartNum | [15-4] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| Revision | [3-0] | y |
- x--------------------------------------------------x
+ +------------------------------+---------+---------+
NOTE: The 'visible' fields of MIDR_EL1 will contain the value
as available on the CPU where it is fetched and is not a system
@@ -181,74 +190,76 @@ infrastructure:
4) ID_AA64ISAR1_EL1 - Instruction set attribute register 1
- x--------------------------------------------------x
+ +------------------------------+---------+---------+
| Name | bits | visible |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| GPI | [31-28] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| GPA | [27-24] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| LRCPC | [23-20] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| FCMA | [19-16] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| JSCVT | [15-12] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| API | [11-8] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| APA | [7-4] | y |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| DPB | [3-0] | y |
- x--------------------------------------------------x
+ +------------------------------+---------+---------+
5) ID_AA64MMFR2_EL1 - Memory model feature register 2
- x--------------------------------------------------x
+ +------------------------------+---------+---------+
| Name | bits | visible |
- |--------------------------------------------------|
+ +------------------------------+---------+---------+
| AT | [35-32] | y |
- x--------------------------------------------------x
+ +------------------------------+---------+---------+
Appendix I: Example
----------------------------
+-------------------
-/*
- * Sample program to demonstrate the MRS emulation ABI.
- *
- * Copyright (C) 2015-2016, ARM Ltd
- *
- * Author: Suzuki K Poulose <suzuki.poulose@....com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
+::
-#include <asm/hwcap.h>
-#include <stdio.h>
-#include <sys/auxv.h>
+ /*
+ * Sample program to demonstrate the MRS emulation ABI.
+ *
+ * Copyright (C) 2015-2016, ARM Ltd
+ *
+ * Author: Suzuki K Poulose <suzuki.poulose@....com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
-#define get_cpu_ftr(id) ({ \
+ #include <asm/hwcap.h>
+ #include <stdio.h>
+ #include <sys/auxv.h>
+
+ #define get_cpu_ftr(id) ({ \
unsigned long __val; \
asm("mrs %0, "#id : "=r" (__val)); \
printf("%-20s: 0x%016lx\n", #id, __val); \
})
-int main(void)
-{
+ int main(void)
+ {
if (!(getauxval(AT_HWCAP) & HWCAP_CPUID)) {
fputs("CPUID registers unavailable\n", stderr);
@@ -268,13 +279,10 @@ int main(void)
get_cpu_ftr(MPIDR_EL1);
get_cpu_ftr(REVIDR_EL1);
-#if 0
+ #if 0
/* Unexposed register access causes SIGILL */
get_cpu_ftr(ID_MMFR0_EL1);
-#endif
+ #endif
return 0;
-}
-
-
-
+ }
diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.txt
index 13d6691b37be..e624d6bd89f2 100644
--- a/Documentation/arm64/elf_hwcaps.txt
+++ b/Documentation/arm64/elf_hwcaps.txt
@@ -1,3 +1,4 @@
+================
ARM64 ELF hwcaps
================
@@ -15,16 +16,16 @@ of flags called hwcaps, exposed in the auxilliary vector.
Userspace software can test for features by acquiring the AT_HWCAP entry
of the auxilliary vector, and testing whether the relevant flags are
-set, e.g.
+set, e.g.::
-bool floating_point_is_present(void)
-{
- unsigned long hwcaps = getauxval(AT_HWCAP);
- if (hwcaps & HWCAP_FP)
- return true;
+ bool floating_point_is_present(void)
+ {
+ unsigned long hwcaps = getauxval(AT_HWCAP);
+ if (hwcaps & HWCAP_FP)
+ return true;
- return false;
-}
+ return false;
+ }
Where software relies on a feature described by a hwcap, it should check
the relevant hwcap flag to verify that the feature is present before
@@ -45,7 +46,7 @@ userspace code at EL0. These hwcaps are defined in terms of ID register
fields, and should be interpreted with reference to the definition of
these fields in the ARM Architecture Reference Manual (ARM ARM).
-Such hwcaps are described below in the form:
+Such hwcaps are described below in the form::
Functionality implied by idreg.field == val.
@@ -64,133 +65,102 @@ reference to ID registers, and may refer to other documentation.
---------------------------------
HWCAP_FP
-
Functionality implied by ID_AA64PFR0_EL1.FP == 0b0000.
HWCAP_ASIMD
-
Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0000.
HWCAP_EVTSTRM
-
The generic timer is configured to generate events at a frequency of
approximately 100KHz.
HWCAP_AES
-
Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0001.
HWCAP_PMULL
-
Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0010.
HWCAP_SHA1
-
Functionality implied by ID_AA64ISAR0_EL1.SHA1 == 0b0001.
HWCAP_SHA2
-
Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0001.
HWCAP_CRC32
-
Functionality implied by ID_AA64ISAR0_EL1.CRC32 == 0b0001.
HWCAP_ATOMICS
-
Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0010.
HWCAP_FPHP
-
Functionality implied by ID_AA64PFR0_EL1.FP == 0b0001.
HWCAP_ASIMDHP
-
Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0001.
HWCAP_CPUID
-
EL0 access to certain ID registers is available, to the extent
described by Documentation/arm64/cpu-feature-registers.txt.
These ID registers may imply the availability of features.
HWCAP_ASIMDRDM
-
Functionality implied by ID_AA64ISAR0_EL1.RDM == 0b0001.
HWCAP_JSCVT
-
Functionality implied by ID_AA64ISAR1_EL1.JSCVT == 0b0001.
HWCAP_FCMA
-
Functionality implied by ID_AA64ISAR1_EL1.FCMA == 0b0001.
HWCAP_LRCPC
-
Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0001.
HWCAP_DCPOP
-
Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0001.
HWCAP_SHA3
-
Functionality implied by ID_AA64ISAR0_EL1.SHA3 == 0b0001.
HWCAP_SM3
-
Functionality implied by ID_AA64ISAR0_EL1.SM3 == 0b0001.
HWCAP_SM4
-
Functionality implied by ID_AA64ISAR0_EL1.SM4 == 0b0001.
HWCAP_ASIMDDP
-
Functionality implied by ID_AA64ISAR0_EL1.DP == 0b0001.
HWCAP_SHA512
-
Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0010.
HWCAP_SVE
-
Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001.
HWCAP_ASIMDFHM
-
Functionality implied by ID_AA64ISAR0_EL1.FHM == 0b0001.
HWCAP_DIT
-
Functionality implied by ID_AA64PFR0_EL1.DIT == 0b0001.
HWCAP_USCAT
-
Functionality implied by ID_AA64MMFR2_EL1.AT == 0b0001.
HWCAP_ILRCPC
-
Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0010.
HWCAP_FLAGM
-
Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0001.
HWCAP_SSBS
-
Functionality implied by ID_AA64PFR1_EL1.SSBS == 0b0010.
HWCAP_PACA
-
Functionality implied by ID_AA64ISAR1_EL1.APA == 0b0001 or
ID_AA64ISAR1_EL1.API == 0b0001, as described by
Documentation/arm64/pointer-authentication.txt.
HWCAP_PACG
-
Functionality implied by ID_AA64ISAR1_EL1.GPA == 0b0001 or
ID_AA64ISAR1_EL1.GPI == 0b0001, as described by
Documentation/arm64/pointer-authentication.txt.
diff --git a/Documentation/arm64/hugetlbpage.txt b/Documentation/arm64/hugetlbpage.txt
index cfae87dc653b..b44f939e5210 100644
--- a/Documentation/arm64/hugetlbpage.txt
+++ b/Documentation/arm64/hugetlbpage.txt
@@ -1,3 +1,4 @@
+====================
HugeTLBpage on ARM64
====================
@@ -31,8 +32,10 @@ and level of the page table.
The following hugepage sizes are supported -
- CONT PTE PMD CONT PMD PUD
- -------- --- -------- ---
+ ====== ======== ==== ======== ===
+ - CONT PTE PMD CONT PMD PUD
+ ====== ======== ==== ======== ===
4K: 64K 2M 32M 1G
16K: 2M 32M 1G
64K: 2M 512M 16G
+ ====== ======== ==== ======== ===
diff --git a/Documentation/arm64/legacy_instructions.txt b/Documentation/arm64/legacy_instructions.txt
index 01bf3d9fac85..54401b22cb8f 100644
--- a/Documentation/arm64/legacy_instructions.txt
+++ b/Documentation/arm64/legacy_instructions.txt
@@ -1,3 +1,7 @@
+===================
+Legacy instructions
+===================
+
The arm64 port of the Linux kernel provides infrastructure to support
emulation of instructions which have been deprecated, or obsoleted in
the architecture. The infrastructure code uses undefined instruction
@@ -9,19 +13,22 @@ The emulation mode can be controlled by writing to sysctl nodes
behaviours and the corresponding values of the sysctl nodes -
* Undef
- Value: 0
+ Value: 0
+
Generates undefined instruction abort. Default for instructions that
have been obsoleted in the architecture, e.g., SWP
* Emulate
- Value: 1
+ Value: 1
+
Uses software emulation. To aid migration of software, in this mode
usage of emulated instruction is traced as well as rate limited
warnings are issued. This is the default for deprecated
instructions, .e.g., CP15 barriers
* Hardware Execution
- Value: 2
+ Value: 2
+
Although marked as deprecated, some implementations may support the
enabling/disabling of hardware support for the execution of these
instructions. Using hardware execution generally provides better
@@ -38,20 +45,24 @@ individual instruction notes for further information.
Supported legacy instructions
-----------------------------
* SWP{B}
-Node: /proc/sys/abi/swp
-Status: Obsolete
-Default: Undef (0)
+
+:Node: /proc/sys/abi/swp
+:Status: Obsolete
+:Default: Undef (0)
* CP15 Barriers
-Node: /proc/sys/abi/cp15_barrier
-Status: Deprecated
-Default: Emulate (1)
+
+:Node: /proc/sys/abi/cp15_barrier
+:Status: Deprecated
+:Default: Emulate (1)
* SETEND
-Node: /proc/sys/abi/setend
-Status: Deprecated
-Default: Emulate (1)*
-Note: All the cpus on the system must have mixed endian support at EL0
-for this feature to be enabled. If a new CPU - which doesn't support mixed
-endian - is hotplugged in after this feature has been enabled, there could
-be unexpected results in the application.
+
+:Node: /proc/sys/abi/setend
+:Status: Deprecated
+:Default: Emulate (1)*
+
+ Note: All the cpus on the system must have mixed endian support at EL0
+ for this feature to be enabled. If a new CPU - which doesn't support mixed
+ endian - is hotplugged in after this feature has been enabled, there could
+ be unexpected results in the application.
diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt
index c5dab30d3389..464b880fc4b7 100644
--- a/Documentation/arm64/memory.txt
+++ b/Documentation/arm64/memory.txt
@@ -1,5 +1,6 @@
- Memory Layout on AArch64 Linux
- ==============================
+==============================
+Memory Layout on AArch64 Linux
+==============================
Author: Catalin Marinas <catalin.marinas@....com>
@@ -21,69 +22,69 @@ The swapper_pg_dir address is written to TTBR1 and never written to
TTBR0.
-AArch64 Linux memory layout with 4KB pages + 3 levels:
+AArch64 Linux memory layout with 4KB pages + 3 levels::
-Start End Size Use
------------------------------------------------------------------------
-0000000000000000 0000007fffffffff 512GB user
-ffffff8000000000 ffffffffffffffff 512GB kernel
+ Start End Size Use
+ -----------------------------------------------------------------------
+ 0000000000000000 0000007fffffffff 512GB user
+ ffffff8000000000 ffffffffffffffff 512GB kernel
-AArch64 Linux memory layout with 4KB pages + 4 levels:
+AArch64 Linux memory layout with 4KB pages + 4 levels::
-Start End Size Use
------------------------------------------------------------------------
-0000000000000000 0000ffffffffffff 256TB user
-ffff000000000000 ffffffffffffffff 256TB kernel
+ Start End Size Use
+ -----------------------------------------------------------------------
+ 0000000000000000 0000ffffffffffff 256TB user
+ ffff000000000000 ffffffffffffffff 256TB kernel
-AArch64 Linux memory layout with 64KB pages + 2 levels:
+AArch64 Linux memory layout with 64KB pages + 2 levels::
-Start End Size Use
------------------------------------------------------------------------
-0000000000000000 000003ffffffffff 4TB user
-fffffc0000000000 ffffffffffffffff 4TB kernel
+ Start End Size Use
+ -----------------------------------------------------------------------
+ 0000000000000000 000003ffffffffff 4TB user
+ fffffc0000000000 ffffffffffffffff 4TB kernel
-AArch64 Linux memory layout with 64KB pages + 3 levels:
+AArch64 Linux memory layout with 64KB pages + 3 levels::
-Start End Size Use
------------------------------------------------------------------------
-0000000000000000 0000ffffffffffff 256TB user
-ffff000000000000 ffffffffffffffff 256TB kernel
+ Start End Size Use
+ -----------------------------------------------------------------------
+ 0000000000000000 0000ffffffffffff 256TB user
+ ffff000000000000 ffffffffffffffff 256TB kernel
For details of the virtual kernel memory layout please see the kernel
booting log.
-Translation table lookup with 4KB pages:
+Translation table lookup with 4KB pages::
-+--------+--------+--------+--------+--------+--------+--------+--------+
-|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
-+--------+--------+--------+--------+--------+--------+--------+--------+
- | | | | | |
- | | | | | v
- | | | | | [11:0] in-page offset
- | | | | +-> [20:12] L3 index
- | | | +-----------> [29:21] L2 index
- | | +---------------------> [38:30] L1 index
- | +-------------------------------> [47:39] L0 index
- +-------------------------------------------------> [63] TTBR0/1
+ +--------+--------+--------+--------+--------+--------+--------+--------+
+ |63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
+ +--------+--------+--------+--------+--------+--------+--------+--------+
+ | | | | | |
+ | | | | | v
+ | | | | | [11:0] in-page offset
+ | | | | +-> [20:12] L3 index
+ | | | +-----------> [29:21] L2 index
+ | | +---------------------> [38:30] L1 index
+ | +-------------------------------> [47:39] L0 index
+ +-------------------------------------------------> [63] TTBR0/1
-Translation table lookup with 64KB pages:
+Translation table lookup with 64KB pages::
-+--------+--------+--------+--------+--------+--------+--------+--------+
-|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
-+--------+--------+--------+--------+--------+--------+--------+--------+
- | | | | |
- | | | | v
- | | | | [15:0] in-page offset
- | | | +----------> [28:16] L3 index
- | | +--------------------------> [41:29] L2 index
- | +-------------------------------> [47:42] L1 index
- +-------------------------------------------------> [63] TTBR0/1
+ +--------+--------+--------+--------+--------+--------+--------+--------+
+ |63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
+ +--------+--------+--------+--------+--------+--------+--------+--------+
+ | | | | |
+ | | | | v
+ | | | | [15:0] in-page offset
+ | | | +----------> [28:16] L3 index
+ | | +--------------------------> [41:29] L2 index
+ | +-------------------------------> [47:42] L1 index
+ +-------------------------------------------------> [63] TTBR0/1
When using KVM without the Virtualization Host Extensions, the
diff --git a/Documentation/arm64/pointer-authentication.txt b/Documentation/arm64/pointer-authentication.txt
index 5baca42ba146..f8b9af8b6490 100644
--- a/Documentation/arm64/pointer-authentication.txt
+++ b/Documentation/arm64/pointer-authentication.txt
@@ -1,7 +1,9 @@
+=======================================
Pointer authentication in AArch64 Linux
=======================================
Author: Mark Rutland <mark.rutland@....com>
+
Date: 2017-07-19
This document briefly describes the provision of pointer authentication
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index c00efb639e46..926b2ef62cd2 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -1,7 +1,9 @@
- Silicon Errata and Software Workarounds
- =======================================
+=======================================
+Silicon Errata and Software Workarounds
+=======================================
Author: Will Deacon <will.deacon@....com>
+
Date : 27 November 2015
It is an unfortunate fact of life that hardware is often produced with
@@ -9,11 +11,13 @@ so-called "errata", which can cause it to deviate from the architecture
under specific circumstances. For hardware produced by ARM, these
errata are broadly classified into the following categories:
- Category A: A critical error without a viable workaround.
- Category B: A significant or critical error with an acceptable
+ ========== ========================================================
+ Category A A critical error without a viable workaround.
+ Category B A significant or critical error with an acceptable
workaround.
- Category C: A minor error that is not expected to occur under normal
+ Category C A minor error that is not expected to occur under normal
operation.
+ ========== ========================================================
For more information, consult one of the "Software Developers Errata
Notice" documents available on infocenter.arm.com (registration
@@ -42,45 +46,82 @@ file acts as a registry of software workarounds in the Linux Kernel and
will be updated when new workarounds are committed and backported to
stable kernels.
++----------------+-----------------+-----------------+-----------------------------+
| Implementor | Component | Erratum ID | Kconfig |
-+----------------+-----------------+-----------------+-----------------------------+
++================+=================+=================+=============================+
| Allwinner | A64/R18 | UNKNOWN1 | SUN50I_ERRATUM_UNKNOWN1 |
-| | | | |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A53 | #824069 | ARM64_ERRATUM_824069 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A53 | #819472 | ARM64_ERRATUM_819472 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A53 | #845719 | ARM64_ERRATUM_845719 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A53 | #843419 | ARM64_ERRATUM_843419 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A57 | #832075 | ARM64_ERRATUM_832075 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A57 | #852523 | N/A |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A72 | #853709 | N/A |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A55 | #1024718 | ARM64_ERRATUM_1024718 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A76 | #1188873 | ARM64_ERRATUM_1188873 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A76 | #1165522 | ARM64_ERRATUM_1165522 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | Cortex-A76 | #1286807 | ARM64_ERRATUM_1286807 |
++----------------+-----------------+-----------------+-----------------------------+
| ARM | MMU-500 | #841119,#826419 | N/A |
-| | | | |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 |
++----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 |
++----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 |
++----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 |
++----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX Core | #30115 | CAVIUM_ERRATUM_30115 |
++----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX SMMUv2 | #27704 | N/A |
++----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX2 SMMUv3| #74 | N/A |
++----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX2 SMMUv3| #126 | N/A |
-| | | | |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
| Freescale/NXP | LS2080A/LS1043A | A-008585 | FSL_ERRATUM_A008585 |
-| | | | |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
| Hisilicon | Hip0{5,6,7} | #161010101 | HISILICON_ERRATUM_161010101 |
++----------------+-----------------+-----------------+-----------------------------+
| Hisilicon | Hip0{6,7} | #161010701 | N/A |
++----------------+-----------------+-----------------+-----------------------------+
| Hisilicon | Hip07 | #161600802 | HISILICON_ERRATUM_161600802 |
++----------------+-----------------+-----------------+-----------------------------+
| Hisilicon | Hip08 SMMU PMCG | #162001800 | N/A |
-| | | | |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | Kryo/Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 |
++----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 |
++----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | QDF2400 ITS | E0065 | QCOM_QDF2400_ERRATUM_0065 |
++----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | Falkor v{1,2} | E1041 | QCOM_FALKOR_ERRATUM_1041 |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
| Fujitsu | A64FX | E#010001 | FUJITSU_ERRATUM_010001 |
++----------------+-----------------+-----------------+-----------------------------+
diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt
index 7169a0ec41d8..d73c8e04b22b 100644
--- a/Documentation/arm64/sve.txt
+++ b/Documentation/arm64/sve.txt
@@ -1,7 +1,9 @@
- Scalable Vector Extension support for AArch64 Linux
- ===================================================
+===================================================
+Scalable Vector Extension support for AArch64 Linux
+===================================================
Author: Dave Martin <Dave.Martin@....com>
+
Date: 4 August 2017
This document outlines briefly the interface provided to userspace by Linux in
@@ -409,7 +411,7 @@ In A64 state, SVE adds the following:
* FPSR and FPCR are retained from ARMv8-A, and interact with SVE floating-point
operations in a similar way to the way in which they interact with ARMv8
- floating-point operations.
+ floating-point operations::
8VL-1 128 0 bit index
+---- //// -----------------+
@@ -466,6 +468,8 @@ ARMv8-A defines the following floating-point / SIMD register state:
* 32 128-bit vector registers V0..V31
* 2 32-bit status/control registers FPSR, FPCR
+::
+
127 0 bit index
+---------------+
V0 | |
diff --git a/Documentation/arm64/tagged-pointers.txt b/Documentation/arm64/tagged-pointers.txt
index a25a99e82bb1..2acdec3ebbeb 100644
--- a/Documentation/arm64/tagged-pointers.txt
+++ b/Documentation/arm64/tagged-pointers.txt
@@ -1,7 +1,9 @@
- Tagged virtual addresses in AArch64 Linux
- =========================================
+=========================================
+Tagged virtual addresses in AArch64 Linux
+=========================================
Author: Will Deacon <will.deacon@....com>
+
Date : 12 June 2013
This document briefly describes the provision of tagged virtual
diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c
index 07bf740bea91..31cc2f423aa8 100644
--- a/arch/arm64/kernel/kexec_image.c
+++ b/arch/arm64/kernel/kexec_image.c
@@ -53,7 +53,7 @@ static void *image_load(struct kimage *image,
/*
* We require a kernel with an unambiguous Image header. Per
- * Documentation/booting.txt, this is the case when image_size
+ * Documentation/arm64/booting.txt, this is the case when image_size
* is non-zero (practically speaking, since v3.17).
*/
h = (struct arm64_image_header *)kernel;
--
2.20.1
Powered by blists - more mailing lists