| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 17 Apr 2019 08:34:33 -0500
From: Rob Herring <robh+dt@...nel.org>
To: Brian Masney <masneyb@...tation.org>
Cc: Lee Jones <lee.jones@...aro.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
Jingoo Han <jingoohan1@...il.com>,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
Pavel Machek <pavel@....cz>,
Mark Rutland <mark.rutland@....com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Linux LED Subsystem <linux-leds@...r.kernel.org>,
devicetree@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Linux Fbdev development list <linux-fbdev@...r.kernel.org>,
Dan Murphy <dmurphy@...com>, Jonathan Marek <jonathan@...ek.ca>
Subject: Re: [PATCH v4 2/3] dt-bindings: backlight: add lm3630a bindings
On Tue, Apr 16, 2019 at 6:54 PM Brian Masney <masneyb@...tation.org> wrote:
>
> Add new backlight bindings for the TI LM3630A dual-string white LED.
>
> Signed-off-by: Brian Masney <masneyb@...tation.org>
> ---
> Rob: Since the common bindings aren't converted to the new JSON schema
> yet, I'm not sure how to do led-sources here. I would expect that we'd
> have the uint32-array on the common binding once it exists. I had to
> add it here to keep 'make dt_binding_check' happy. I left the
> description off though for that property since that'll come from common
> once its converted.
What was the error? '$ref' shouldn't be needed for this. The tooling
has no knowledge whether there's common schema or not. So you probably
have some pattern the meta-schema doesn't like and we need to fix.
>
> Changes since v3:
> - Add label. I didn't add a description for it since that'll come from
> the common properties once its converted.
>
> Changes since v2:
> - Update description of max-brightness
> - Add description for reg
> - Correct typo: s/tranisiton/transition
> - add reg to control banks
> - add additionalProperties
>
> .../leds/backlight/lm3630a-backlight.yaml | 128 ++++++++++++++++++
> 1 file changed, 128 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> new file mode 100644
> index 000000000000..5067038ca637
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> @@ -0,0 +1,128 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/lm3630a-backlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI LM3630A High-Efficiency Dual-String White LED
> +
> +maintainers:
> + - Lee Jones <lee.jones@...aro.org>
> + - Daniel Thompson <daniel.thompson@...aro.org>
> + - Jingoo Han <jingoohan1@...il.com>
> +
> +description: |
> + The LM3630A is a current-mode boost converter which supplies the power and
> + controls the current in up to two strings of 10 LEDs per string.
> + https://www.ti.com/product/LM3630A
> +
> +properties:
> + compatible:
> + const: ti,lm3630a
> +
> + reg:
> + description: The I2C address of the device
No need to describe a common property if there's nothing specific for
this device.
> + maxItems: 1
> +
> + ti,linear-mapping-mode:
> + description: |
> + Enable linear mapping mode. If disabled, then it will use exponential
> + mapping mode in which the ramp up/down appears to have a more uniform
> + transition to the human eye.
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> +
> +patternProperties:
> + "^led@[01]$":
> + type: object
> + description: |
> + Properties for a string of connected LEDs.
> +
> + properties:
> + reg:
> + description: Control Bank
Probably makes sense to have description here since this isn't a
standard type of address.
> + maxItems: 1
> + minimum: 0
> + maximum: 1
> +
> + label:
> + maxItems: 1
> +
> + led-sources:
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + - minItems: 1
> + maxItems: 2
> + items:
> + minimum: 0
> + maximum: 1
> +
> + default-brightness:
> + description: Default brightness level on boot.
> + minimum: 0
> + maximum: 255
> +
> + max-brightness:
> + description: Maximum brightness that is allowed during runtime.
> + minimum: 0
> + maximum: 255
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + lm3630a_bl@38 {
led-controller@38
> + compatible = "ti,lm3630a";
> + status = "ok";
Don't show status in examples.
> + reg = <0x38>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + led-sources = <0 1>;
> + label = "lcd-backlight";
> + default-brightness = <200>;
> + max-brightness = <255>;
> + };
> + };
> + };
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + lm3630a_bl@38 {
> + compatible = "ti,lm3630a";
> + status = "ok";
> + reg = <0x38>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + default-brightness = <150>;
> + ti,linear-mapping-mode;
> + };
> +
> + led@1 {
> + reg = <1>;
> + default-brightness = <225>;
> + ti,linear-mapping-mode;
> + };
> + };
> + };
> --
> 2.20.1
>
Powered by blists - more mailing lists