linux-kernel - Re: [PATCH v4 5/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 18 Apr 2019 17:56:13 +0200
From:   Maxime Ripard <maxime.ripard@...tlin.com>
To:     Pablo Greco <pgreco@...tosproject.org>
Cc:     linux-sunxi@...glegroups.com, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 5/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Add
 Bluetooth device node

On Thu, Apr 18, 2019 at 12:11:20PM -0300, Pablo Greco wrote:
> Since the bananapi-m2-ultra and the bananapi-m2-berry have the same
> WiFi/Bluetooth, add the required nodes to the bananapi-m2-berry.
>
> Signed-off-by: Pablo Greco <pgreco@...tosproject.org>
> ---
>  arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 26 +++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> index 78f4a1a..3d0bb7e 100644
> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> @@ -96,6 +96,8 @@
>  	wifi_pwrseq: wifi_pwrseq {
>  		compatible = "mmc-pwrseq-simple";
>  		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
> +		clocks = <&ccu CLK_OUTA>;
> +		clock-names = "ext_clock";
>  	};
>  };
>
> @@ -171,6 +173,11 @@
>  	status = "okay";
>  };
>
> +&pio {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&clk_out_a_pin>;
> +};
> +

I'm not sure you answered my question about why that is needed?

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)