| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <79d43377285d6897847ac1452afbb18a@www.akkea.ca>
Date: Thu, 18 Apr 2019 10:44:50 -0700
From: Angus Ainslie <angus@...ea.ca>
To: Rob Herring <robh@...nel.org>
Cc: angus.ainslie@...i.sm, m.felsch@...gutronix.de,
Mark Rutland <mark.rutland@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Palmer Dabbelt <palmer@...ive.com>,
Albert Ou <aou@...s.berkeley.edu>,
Paul Walmsley <paul.walmsley@...ive.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Guo Ren <guoren@...nel.org>,
Thierry Reding <treding@...dia.com>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Kevin Hilman <khilman@...libre.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Andrey Smirnov <andrew.smirnov@...il.com>,
Jonathan Neuschäfer <j.neuschaefer@....net>,
Jacky Bai <ping.bai@....com>,
Aisheng Dong <aisheng.dong@....com>,
Bruno Thomsen <bruno.thomsen@...il.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH v5 1/3] arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
Hi Rob,
On 2019-04-18 08:13, Rob Herring wrote:
> On Wed, Apr 17, 2019 at 09:55:12AM -0700, Angus Ainslie (Purism) wrote:
>> This is the development kit board for the Librem 5. The current level
>> of
>> support yields a working console and is able to boot userspace from
>> the
>> Network or eMMC.
>>
>> Additional subsystems that are active :
>>
>> - Both USB ports
>> - SD card socket
>> - WiFi usdhc
>> - WWAN modem
>> - GNSS
>> - GPIO keys
>> - LEDs
>> - gyro
>> - magnetometer
>> - touchscreen
>> - pwm
>> - backlight
>> - haptic motor
>>
>> Signed-off-by: Angus Ainslie (Purism) <angus@...ea.ca>
>> ---
>> arch/arm64/boot/dts/freescale/Makefile | 1 +
>> .../dts/freescale/imx8mq-librem5-devkit.dts | 833
>> ++++++++++++++++++
>> 2 files changed, 834 insertions(+)
>> create mode 100644
>> arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
>>
>> diff --git a/arch/arm64/boot/dts/freescale/Makefile
>> b/arch/arm64/boot/dts/freescale/Makefile
>> index 0bd122f60549..c043aca66572 100644
>> --- a/arch/arm64/boot/dts/freescale/Makefile
>> +++ b/arch/arm64/boot/dts/freescale/Makefile
>> @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
>>
>> dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
>> dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
>> +dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
>> dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
>> dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
>> dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
>> b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
>> new file mode 100644
>> index 000000000000..846a72dc7640
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
>
>> +&usb3_phy0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "okay";
>> +
>> + port@0 {
>> + reg = <0>;
>> +
>> + typec_hs: endpoint {
>> + remote-endpoint = <&usb_con_hs>;
>> + };
>> + };
>> +
>> + port@1 {
>> + reg = <1>;
>> +
>> + typec_ss: endpoint {
>> + remote-endpoint = <&usb_con_ss>;
>> + };
>> + };
>
> This is wrong. The graph should be between the USB controller and the
> connector. The phy is not involved.
>
>> +};
>> +
>> +&usb3_phy1 {
>> + status = "okay";
>> +};
>> +
>> +&usb_dwc3_0 {
>> + extcon = <&typec_ptn5100>;
>
> extcon is deprecated and you should only have the usb-connector
> binding.
> From the controller, you can walk the graph to the connector.
>
I not sure that I'm clear on what you mean. Here's what I think you want
it changed to.
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 846a72dc7640..7b8770fdc5fb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -755,51 +755,50 @@
};
&uart4 { /* BT */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
uart-has-rtscts;
status = "okay";
};
&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
#address-cells = <1>;
#size-cells = <0>;
+ dr_mode = "otg";
status = "okay";
port@0 {
reg = <0>;
typec_hs: endpoint {
remote-endpoint = <&usb_con_hs>;
};
};
port@1 {
reg = <1>;
typec_ss: endpoint {
remote-endpoint = <&usb_con_ss>;
};
};
};
-&usb3_phy1 {
- status = "okay";
-};
-
-&usb_dwc3_0 {
- extcon = <&typec_ptn5100>;
- dr_mode = "otg";
- status = "okay";
-};
-
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
Thanks
Angus
>> + dr_mode = "otg";
>> + status = "okay";
>> +};
Powered by blists - more mailing lists