lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <VE1PR04MB64791A6A54CBBA9897E67B50E3270@VE1PR04MB6479.eurprd04.prod.outlook.com>
Date:   Fri, 19 Apr 2019 10:21:58 +0000
From:   "S.j. Wang" <shengjiu.wang@....com>
To:     Nicolin Chen <nicoleotsuka@...il.com>
CC:     "timur@...nel.org" <timur@...nel.org>,
        "Xiubo.Lee@...il.com" <Xiubo.Lee@...il.com>,
        "festevam@...il.com" <festevam@...il.com>,
        "broonie@...nel.org" <broonie@...nel.org>,
        "alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
        "linuxppc-dev@...ts.ozlabs.org" <linuxppc-dev@...ts.ozlabs.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V3 1/2] ASoC: fsl_asrc: replace the process_option table
 with function

Hi

> 
> 
> On Thu, Apr 18, 2019 at 09:37:06AM +0000, S.j. Wang wrote:
> > > > > And this is according to IMX6DQRM:
> > > > >     Limited support for the case when output sampling rates is
> > > > >     between 8kHz and 30kHz. The limitation is the supported ratio
> > > > >     (Fsin/Fsout) range as between 1/24 to 8
> > > > >
> > > > > This should cover your 8.125 condition already, even if having
> > > > > an outrate range between [8KHz, 30KHz] check, since an outrate
> > > > > above 30KHz will not have an inrate bigger than 8.125 times of
> > > > > it, given the maximum input rate is 192KHz.
> > > > >
> > > > > So I think that we can just drop that 8.125 condition from your
> > > > > change and there's no need to error out any more.
> > > > >
> > > > No, if outrate=8kHz,  inrate > 88.2kHz, these cases are not supported.
> > > > This is not covered by
> > > >
> > > >         if ((outrate > 8000 && outrate < 30000) &&
> > > >             (outrate/inrate > 24 || inrate/outrate > 8)) {
> > >
> > > Good catch. The range should be [8KHz, 30KHz] vs. (8KHz, 32KHz) in
> > > the code. Then I think the fix should be at both lines:
> > >
> > > -         if ((outrate > 8000 && outrate < 30000) &&
> > > -             (outrate/inrate > 24 || inrate/outrate > 8)) {
> > > +         if ((outrate >= 8000 && outrate =< 30000) &&
> > > +             (outrate > 24 * inrate || inrate > 8 * outrate)) {
> > >
> > > Overall, I think we should fix this instead of adding an extra one,
> > > since it is very likely saying the same thing.
> >
> > Actually if outrate < 8kHz, there will be issue too.
> 
> Here is the thing, the RM doesn't explicitly state that ASRC can support a
> lower output sample rate than 8KHz. And I actually had a concern when
> reviewing your PATCH-2, as the table of supported output sample rate no
> longer matches RM.
> 
> If you've verified a lower output sample rate working solid with the
> process_option function, that means our driver can go beyond the
> limitation mentioned in the RM, then I believe [8KHz, 32KHz] should be
> updated too -- that says we can do:
> -       if ((outrate > 8000 && outrate < 30000) &&
> -           (outrate/inrate > 24 || inrate/outrate > 8)) {
> +       if ((outrate >= 5512 && outrate =< 30000) &&
> +           (outrate > 24 * inrate || inrate > 8 * outrate)) {
> 
> Actually "ourate > 24 * inrate" is kind of pointless for range [5KHz, 32KHz]
> but we can keep it since it matches RM.

Ok, will send v4.

Best regards
Wang shengjiu

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ