lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20190421075939.GE19962@dragon>
Date:   Sun, 21 Apr 2019 15:59:41 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Vladimir Oltean <olteanv@...il.com>
Cc:     leoyang.li@....com, claudiu.manoil@....com, robh+dt@...nel.org,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        davem@...emloft.net
Subject: Re: [PATCH v2 2/2] ARM: dts: ls1021: Fix SGMII PCS link remaining
 down after PHY disconnect

On Fri, Apr 12, 2019 at 02:23:15AM +0300, Vladimir Oltean wrote:
> Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus.
> But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC
> are pointing towards the same internal PCS. Therefore nobody is
> controlling the internal PCS of eTSEC0.
> 
> Upon initial ndo_open, the SGMII link is ok by virtue of U-boot
> initialization. But upon an ifdown/ifup sequence, the code path from
> ndo_open -> init_phy -> gfar_configure_serdes does not get executed for
> the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII
> link remains down for eTSEC0. On the LS1021A-TWR board, to signal this
> failure condition, the PHY driver keeps printing
> '803x_aneg_done: SGMII link is not ok'.
> 
> Fixes: 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR")
> Signed-off-by: Vladimir Oltean <olteanv@...il.com>
> Reviewed-by: Claudiu Manoil <claudiu.manoil@....com>

To get it land as fix a bit easier, I squashed both patches into one
(with a little edit on commit log), and applied it.

Shawn

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ