| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190422173323.15365-4-linux@zary.sk>
Date: Mon, 22 Apr 2019 19:33:22 +0200
From: Ondrej Zary <linux@...y.sk>
To: Rik Faith <faith@...unc.edu>,
"David A . Hinds" <dahinds@...rs.sourceforge.net>
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [RFC PATCH 3/4] fdomain: Resurrect driver (ISA support)
Future Domain 16xx ISA SCSI support card support.
Currently untested.
Signed-off-by: Ondrej Zary <linux@...y.sk>
---
drivers/scsi/Kconfig | 14 +++
drivers/scsi/Makefile | 1 +
drivers/scsi/fdomain_isa.c | 227 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 242 insertions(+)
create mode 100644 drivers/scsi/fdomain_isa.c
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index f9d058a07e2a..2ea77dafbc00 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -684,6 +684,20 @@ config SCSI_FDOMAIN_PCI
To compile this driver as a module, choose M here: the
module will be called fdomain_pci.
+config SCSI_FDOMAIN_ISA
+ tristate "Future Domain 16xx ISA SCSI support"
+ depends on ISA && SCSI
+ select CHECK_SIGNATURE
+ select SCSI_FDOMAIN
+ help
+ This is support for Future Domain's 16-bit SCSI host adapters
+ (TMC-1660/1680, TMC-1650/1670, TMC-1610M/MER/MEX) and other adapters
+ with ISA bus based on the Future Domain chipsets (Quantum ISA-200S,
+ ISA-250MG; and at least one IBM board).
+
+ To compile this driver as a module, choose M here: the
+ module will be called fdomain_isa.
+
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on PCI && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index f6cc4fbe6957..2e2cffff777d 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_SCSI_ISCI) += isci/
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FDOMAIN) += fdomain.o
obj-$(CONFIG_SCSI_FDOMAIN_PCI) += fdomain_pci.o
+obj-$(CONFIG_SCSI_FDOMAIN_ISA) += fdomain_isa.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
diff --git a/drivers/scsi/fdomain_isa.c b/drivers/scsi/fdomain_isa.c
new file mode 100644
index 000000000000..9f8bf02f175f
--- /dev/null
+++ b/drivers/scsi/fdomain_isa.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/isa.h>
+#include <scsi/scsi_host.h>
+#include "fdomain.h"
+
+#define MAXBOARDS_PARAM 4
+static int io[MAXBOARDS_PARAM] = { 0, 0, 0, 0 };
+module_param_hw_array(io, int, ioport, NULL, 0);
+MODULE_PARM_DESC(io, "base I/O address of controller (0x140, 0x150, 0x160, 0x170)");
+
+static int irq[MAXBOARDS_PARAM] = { 0, 0, 0, 0 };
+module_param_hw_array(irq, int, irq, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ of controller (0=auto [default])");
+
+static int scsi_id[MAXBOARDS_PARAM] = { 0, 0, 0, 0 };
+module_param_hw_array(scsi_id, int, other, NULL, 0);
+MODULE_PARM_DESC(scsi_id, "SCSI ID of controller (default = 6)");
+
+static unsigned long addresses[] = {
+ 0xc8000,
+ 0xca000,
+ 0xce000,
+ 0xde000,
+};
+#define ADDRESS_COUNT ARRAY_SIZE(addresses)
+
+static unsigned short ports[] = { 0x140, 0x150, 0x160, 0x170 };
+#define PORT_COUNT ARRAY_SIZE(ports)
+
+/* This driver works *ONLY* for Future Domain cards using the TMC-1800,
+ * TMC-18C50, or TMC-18C30 chip. This includes models TMC-1650, 1660, 1670,
+ * and 1680. These are all 16-bit cards.
+ *
+ * The following BIOS signature signatures are for boards which do *NOT*
+ * work with this driver (these TMC-8xx and TMC-9xx boards may work with the
+ * Seagate driver):
+ *
+ * FUTURE DOMAIN CORP. (C) 1986-1988 V4.0I 03/16/88
+ * FUTURE DOMAIN CORP. (C) 1986-1989 V5.0C2/14/89
+ * FUTURE DOMAIN CORP. (C) 1986-1989 V6.0A7/28/89
+ * FUTURE DOMAIN CORP. (C) 1986-1990 V6.0105/31/90
+ * FUTURE DOMAIN CORP. (C) 1986-1990 V6.0209/18/90
+ * FUTURE DOMAIN CORP. (C) 1986-1990 V7.009/18/90
+ * FUTURE DOMAIN CORP. (C) 1992 V8.00.004/02/92
+ *
+ * (The cards which do *NOT* work are all 8-bit cards -- although some of
+ * them have a 16-bit form-factor, the upper 8-bits are used only for IRQs
+ * and are *NOT* used for data. You can tell the difference by following
+ * the tracings on the circuit board -- if only the IRQ lines are involved,
+ * you have a "8-bit" card, and should *NOT* use this driver.)
+ */
+
+static struct signature signatures[] = {
+/* 1 2 3 4 5 6 */
+/* 123456789012345678901234567890123456789012345678901234567890 */
+{ "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.07/28/89", 5, 50, 2, 0, 0 },
+{ "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V1.07/28/89", 5, 50, 2, 0, 0 },
+{ "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.07/28/89", 72, 50, 2, 0, 2 },
+{ "FUTURE DOMAIN CORP. (C) 1986-1990 1800-V2.0", 73, 43, 2, 0, 3 },
+{ "FUTURE DOMAIN CORP. (C) 1991 1800-V2.0.", 72, 39, 2, 0, 4 },
+{ "FUTURE DOMAIN CORP. (C) 1992 V3.00.004/02/92", 5, 44, 3, 0, 0 },
+{ "FUTURE DOMAIN TMC-18XX (C) 1993 V3.203/12/93", 5, 44, 3, 2, 0 },
+{ "IBM F1 P2 BIOS v1.0104/29/93", 5, 28, 3, -1, 0 },
+{ "Future Domain Corp. V1.0008/18/93", 5, 33, 3, 4, 0 },
+{ "Future Domain Corp. V1.0008/18/93", 26, 33, 3, 4, 1 },
+{ "Adaptec AHA-2920 PCI-SCSI Card", 42, 31, 3, -1, 1 },
+{ "IBM F1 P264/32", 5, 14, 3, -1, 1 },
+/* This next signature may not be a 3.5 bios */
+{ "Future Domain Corp. V2.0108/18/93", 5, 33, 3, 5, 0 },
+{ "FUTURE DOMAIN CORP. V3.5008/18/93", 5, 34, 3, 5, 0 },
+{ "FUTURE DOMAIN 18c30/18c50/1800 (C) 1994 V3.5", 5, 44, 3, 5, 0 },
+{ "FUTURE DOMAIN CORP. V3.6008/18/93", 5, 34, 3, 6, 0 },
+{ "FUTURE DOMAIN CORP. V3.6108/18/93", 5, 34, 3, 6, 0 },
+{ "FUTURE DOMAIN TMC-18XX", 5, 22, -1, -1, 0 },
+/* Note that the last line will match a "generic" 18XX bios. Because
+ * Future Domain has changed the host SCSI ID and/or the location of the
+ * geometry information in the on-board RAM area for each of the first
+ * three BIOS's, it is still important to enter a fully qualified
+ * signature in the table for any new BIOS's (after the host SCSI ID and
+ * geometry location are verified).
+ */
+};
+#define SIGNATURE_COUNT ARRAY_SIZE(signatures)
+
+static int fdomain_isa_match(struct device *dev, unsigned int ndev)
+{
+ struct Scsi_Host *sh;
+ int i, base = 0, irq = 0, bios_base = 0;
+ struct signature *sig = NULL;
+ void __iomem *p;
+ static int saved_bios_base;
+ static struct signature *saved_sig;
+
+ if (ndev < ADDRESS_COUNT) { /* scan supported ISA BIOS addresses */
+ p = ioremap(addresses[ndev], FDOMAIN_BIOS_SIZE);
+ if (!p)
+ return 0;
+ for (i = 0; i < SIGNATURE_COUNT; i++)
+ if (check_signature(p + signatures[i].offset,
+ signatures[i].signature,
+ signatures[i].length))
+ break;
+ if (i == SIGNATURE_COUNT) /* no signature found */
+ goto fail_unmap;
+ if (signatures[i].flag == 1) /* ignore PCI devices */
+ goto fail_unmap;
+ sig = &signatures[i];
+ bios_base = addresses[ndev];
+ /* read I/O base from BIOS area */
+ if (sig->bios_major == 2) {
+ switch (sig->flag) {
+ case 2: /* ISA_200S */
+ case 3: /* ISA_250MG */
+ base = readb(p + 0x1fa2) +
+ (readb(p + 0x1fa3) << 8);
+ break;
+ case 4: /* ISA_200S (another one) */
+ base = readb(p + 0x1fa3) +
+ (readb(p + 0x1fa4) << 8);
+ break;
+ default:
+ base = readb(p + 0x1fcc) +
+ (readb(p + 0x1fcd) << 8);
+ break;
+ }
+ }
+ iounmap(p);
+ if (!base) { /* no I/O base in BIOS area */
+ /* save BIOS info for later use in port probing */
+ saved_bios_base = bios_base;
+ saved_sig = sig;
+ return 0;
+ }
+ } else /* scan supported I/O ports */
+ base = ports[ndev - ADDRESS_COUNT];
+
+ /* use saved BIOS details if present */
+ if (!bios_base && saved_bios_base) {
+ bios_base = saved_bios_base;
+ sig = saved_sig;
+ }
+
+ if (!request_region(base, FDOMAIN_REGION_SIZE, "fdomain_isa"))
+ return 0;
+
+ sh = fdomain_create(base, irq, 0, bios_base, sig, dev);
+ if (!sh) {
+ release_region(base, FDOMAIN_REGION_SIZE);
+ return 0;
+ }
+
+ dev_set_drvdata(dev, sh);
+ return 1;
+fail_unmap:
+ iounmap(p);
+ return 0;
+}
+
+static int fdomain_isa_param_match(struct device *dev, unsigned int ndev)
+{
+ struct Scsi_Host *sh;
+
+ if (!io[ndev])
+ return 0;
+
+ if (!request_region(io[ndev], FDOMAIN_REGION_SIZE, "fdomain_isa")) {
+ dev_err(dev, "base 0x%x already in use", io[ndev]);
+ return 0;
+ }
+
+ sh = fdomain_create(io[ndev], irq[ndev], scsi_id[ndev], 0, NULL, dev);
+ if (!sh) {
+ dev_err(dev, "controller not found at base 0x%x", io[ndev]);
+ release_region(io[ndev], FDOMAIN_REGION_SIZE);
+ return 0;
+ }
+
+ dev_set_drvdata(dev, sh);
+ return 1;
+}
+
+static int fdomain_isa_remove(struct device *dev, unsigned int ndev)
+{
+ struct Scsi_Host *sh = dev_get_drvdata(dev);
+ int base = sh->io_port;
+
+ fdomain_destroy(sh);
+ release_region(base, FDOMAIN_REGION_SIZE);
+ dev_set_drvdata(dev, NULL);
+ return 0;
+}
+
+static struct isa_driver fdomain_isa_driver = {
+ .match = fdomain_isa_match,
+ .remove = fdomain_isa_remove,
+ .driver = {
+ .name = "fdomain_isa",
+ .pm = FDOMAIN_PM_OPS,
+ },
+};
+
+static int __init fdomain_isa_init(void)
+{
+ int isa_probe_count = ADDRESS_COUNT + PORT_COUNT;
+
+ if (io[0]) { /* use module parameters if present */
+ fdomain_isa_driver.match = fdomain_isa_param_match;
+ isa_probe_count = MAXBOARDS_PARAM;
+ }
+
+ return isa_register_driver(&fdomain_isa_driver, isa_probe_count);
+}
+
+static void __exit fdomain_isa_exit(void)
+{
+ isa_unregister_driver(&fdomain_isa_driver);
+}
+
+module_init(fdomain_isa_init);
+module_exit(fdomain_isa_exit);
+
+MODULE_AUTHOR("Ondrej Zary, Rickard E. Faith");
+MODULE_DESCRIPTION("Future Domain TMC-16x0 ISA SCSI driver");
+MODULE_LICENSE("GPL");
--
Ondrej Zary
Powered by blists - more mailing lists