| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 22 Apr 2019 19:33:20 +0200
From: Ondrej Zary <linux@...y.sk>
To: Rik Faith <faith@...unc.edu>,
"David A . Hinds" <dahinds@...rs.sourceforge.net>
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [RFC PATCH 1/4] fdomain: Resurrect driver (core)
Future Domain TMC-16xx/TMC-3260 SCSI driver.
This is the core driver, common for PCI, ISA and PCMCIA cards.
Signed-off-by: Ondrej Zary <linux@...y.sk>
---
drivers/scsi/Kconfig | 4 +
drivers/scsi/Makefile | 1 +
drivers/scsi/fdomain.c | 666 +++++++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/fdomain.h | 25 ++
4 files changed, 696 insertions(+)
create mode 100644 drivers/scsi/fdomain.c
create mode 100644 drivers/scsi/fdomain.h
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d528018e6fa8..3d6b1f47cbb5 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -663,6 +663,10 @@ config SCSI_DMX3191D
To compile this driver as a module, choose M here: the
module will be called dmx3191d.
+config SCSI_FDOMAIN
+ tristate
+ depends on SCSI
+
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on PCI && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 8826111fdf4a..b8fbc6d2de54 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
obj-$(CONFIG_SCSI_PM8001) += pm8001/
obj-$(CONFIG_SCSI_ISCI) += isci/
obj-$(CONFIG_SCSI_IPS) += ips.o
+obj-$(CONFIG_SCSI_FDOMAIN) += fdomain.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
new file mode 100644
index 000000000000..19ae4e0bd00e
--- /dev/null
+++ b/drivers/scsi/fdomain.c
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Future Domain TMC-16x0 and TMC-3260 SCSI host adapters
+ * Copyright 2019 Ondrej Zary
+ *
+ * Original driver by
+ * Rickard E. Faith, faith@...unc.edu
+ *
+ * Future Domain BIOS versions supported for autodetect:
+ * 2.0, 3.0, 3.2, 3.4 (1.0), 3.5 (2.0), 3.6, 3.61
+ * Chips supported:
+ * TMC-1800, TMC-18C50, TMC-18C30, TMC-36C70
+ * Boards supported:
+ * Future Domain TMC-1650, TMC-1660, TMC-1670, TMC-1680, TMC-1610M/MER/MEX
+ * Future Domain TMC-3260 (PCI)
+ * Quantum ISA-200S, ISA-250MG
+ * Adaptec AHA-2920A (PCI) [BUT *NOT* AHA-2920C -- use aic7xxx instead]
+ * IBM ?
+ *
+ * NOTE:
+ *
+ * The Adaptec AHA-2920C has an Adaptec AIC-7850 chip on it.
+ * Use the aic7xxx driver for this board.
+ *
+ * The Adaptec AHA-2920A has a Future Domain chip on it, so this is the right
+ * driver for that card. Unfortunately, the boxes will probably just say
+ * "2920", so you'll have to look on the card for a Future Domain logo, or a
+ * letter after the 2920.
+ *
+ * If you have a TMC-8xx or TMC-9xx board, then this is not the driver for
+ * your board.
+ *
+ * DESCRIPTION:
+ *
+ * This is the Linux low-level SCSI driver for Future Domain TMC-1660/1680
+ * TMC-1650/1670, and TMC-3260 SCSI host adapters. The 1650 and 1670 have a
+ * 25-pin external connector, whereas the 1660 and 1680 have a SCSI-2 50-pin
+ * high-density external connector. The 1670 and 1680 have floppy disk
+ * controllers built in. The TMC-3260 is a PCI bus card.
+ *
+ * Future Domain's older boards are based on the TMC-1800 chip, and this
+ * driver was originally written for a TMC-1680 board with the TMC-1800 chip.
+ * More recently, boards are being produced with the TMC-18C50 and TMC-18C30
+ * chips.
+ *
+ * Please note that the drive ordering that Future Domain implemented in BIOS
+ * versions 3.4 and 3.5 is the opposite of the order (currently) used by the
+ * rest of the SCSI industry.
+ *
+ *
+ * REFERENCES USED:
+ *
+ * "TMC-1800 SCSI Chip Specification (FDC-1800T)", Future Domain Corporation,
+ * 1990.
+ *
+ * "Technical Reference Manual: 18C50 SCSI Host Adapter Chip", Future Domain
+ * Corporation, January 1992.
+ *
+ * "LXT SCSI Products: Specifications and OEM Technical Manual (Revision
+ * B/September 1991)", Maxtor Corporation, 1991.
+ *
+ * "7213S product Manual (Revision P3)", Maxtor Corporation, 1992.
+ *
+ * "Draft Proposed American National Standard: Small Computer System
+ * Interface - 2 (SCSI-2)", Global Engineering Documents. (X3T9.2/86-109,
+ * revision 10h, October 17, 1991)
+ *
+ * Private communications, Drew Eckhardt (drew@...colorado.edu) and Eric
+ * Youngdale (ericy@...s.com), 1992.
+ *
+ * Private communication, Tuong Le (Future Domain Engineering department),
+ * 1994. (Disk geometry computations for Future Domain BIOS version 3.4, and
+ * TMC-18C30 detection.)
+ *
+ * Hogan, Thom. The Programmer's PC Sourcebook. Microsoft Press, 1988. Page
+ * 60 (2.39: Disk Partition Table Layout).
+ *
+ * "18C30 Technical Reference Manual", Future Domain Corporation, 1993, page
+ * 6-1.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/workqueue.h>
+#include <scsi/scsicam.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include "fdomain.h"
+
+/* FIFO_COUNT: The host adapter has an 8K cache (host adapters based on the
+ * 18C30 chip have a 2k cache). When this many 512 byte blocks are filled by
+ * the SCSI device, an interrupt will be raised. Therefore, this could be as
+ * low as 0, or as high as 16. Note, however, that values which are too high
+ * or too low seem to prevent any interrupts from occurring, and thereby lock
+ * up the machine.
+ */
+#define FIFO_COUNT 2 /* Number of 512 byte blocks before INTR */
+#define PARITY_MASK 0x08 /* Parity enabled, 0x00 = disabled */
+
+static unsigned short irqs[] = { 3, 5, 10, 11, 12, 14, 15, 0 };
+
+enum chip_type {
+ unknown = 0x00,
+ tmc1800 = 0x01,
+ tmc18c50 = 0x02,
+ tmc18c30 = 0x03,
+};
+
+enum {
+ in_arbitration = 0x02,
+ in_selection = 0x04,
+ in_other = 0x08,
+ disconnect = 0x10,
+ aborted = 0x20,
+ sent_ident = 0x40,
+};
+
+enum in_port_type {
+ Read_SCSI_Data = 0,
+ SCSI_Status = 1,
+ TMC_Status = 2,
+ FIFO_Status = 3, /* tmc18c50/tmc18c30 only */
+ Interrupt_Cond = 4, /* tmc18c50/tmc18c30 only */
+ LSB_ID_Code = 5,
+ MSB_ID_Code = 6,
+ Read_Loopback = 7,
+ SCSI_Data_NoACK = 8,
+ Interrupt_Status = 9,
+ Configuration1 = 10,
+ Configuration2 = 11, /* tmc18c50/tmc18c30 only */
+ Read_FIFO = 12,
+ FIFO_Data_Count = 14
+};
+
+enum out_port_type {
+ Write_SCSI_Data = 0,
+ SCSI_Cntl = 1,
+ Interrupt_Cntl = 2,
+ SCSI_Mode_Cntl = 3,
+ TMC_Cntl = 4,
+ Memory_Cntl = 5, /* tmc18c50/tmc18c30 only */
+ Write_Loopback = 7,
+ IO_Control = 11, /* tmc18c30 only */
+ Write_FIFO = 12
+};
+
+struct fdomain {
+ int base;
+ struct scsi_cmnd *cur_cmd;
+ enum chip_type chip;
+ struct work_struct work;
+};
+
+static inline void fdomain_make_bus_idle(struct fdomain *fd)
+{
+ outb(0, fd->base + SCSI_Cntl);
+ outb(0, fd->base + SCSI_Mode_Cntl);
+ if (fd->chip == tmc18c50 || fd->chip == tmc18c30)
+ /* Clear forced intr. */
+ outb(0x21 | PARITY_MASK, fd->base + TMC_Cntl);
+ else
+ outb(0x01 | PARITY_MASK, fd->base + TMC_Cntl);
+}
+
+static enum chip_type fdomain_identify(int port)
+{
+ u16 id = inb(port + LSB_ID_Code) | inb(port + MSB_ID_Code) << 8;
+
+ switch (id) {
+ case 0x6127:
+ return tmc1800;
+ case 0x60e9: /* 18c50 or 18c30 */
+ break;
+ default:
+ return unknown;
+ }
+
+ /* Try to toggle 32-bit mode. This only works on an 18c30 chip.
+ * (User reports say this works, so we should switch to it.)
+ */
+ outb(0x80, port + IO_Control);
+ if ((inb(port + Configuration2) & 0x80) == 0x80) {
+ outb(0x00, port + IO_Control);
+ if ((inb(port + Configuration2) & 0x80) == 0x00)
+ return tmc18c30;
+ }
+ /* If that failed, we are an 18c50. */
+ return tmc18c50;
+}
+
+static int fdomain_test_loopback(int base)
+{
+ int i;
+
+ for (i = 0; i < 255; i++) {
+ outb(i, base + Write_Loopback);
+ if (inb(base + Read_Loopback) != i)
+ return 1;
+ }
+
+ return 0;
+}
+
+void fdomain_reset(int base)
+{
+ outb(1, base + SCSI_Cntl);
+ mdelay(20);
+ outb(0, base + SCSI_Cntl);
+ mdelay(1150);
+ outb(0, base + SCSI_Mode_Cntl);
+ outb(PARITY_MASK, base + TMC_Cntl);
+}
+
+static int fdomain_select(struct Scsi_Host *sh, int target)
+{
+ int status;
+ unsigned long timeout;
+ struct fdomain *fd = shost_priv(sh);
+
+ outb(0x82, fd->base + SCSI_Cntl); /* Bus Enable + Select */
+ outb(BIT(sh->this_id) | BIT(target), fd->base + SCSI_Data_NoACK);
+
+ /* Stop arbitration and enable parity */
+ outb(PARITY_MASK, fd->base + TMC_Cntl);
+
+ timeout = 350; /* 350 msec */
+
+ do {
+ status = inb(fd->base + SCSI_Status); /* Read adapter status */
+ if (status & 1) { /* Busy asserted */
+ /* Enable SCSI Bus */
+ /* (on error, should make bus idle with 0) */
+ outb(0x80, fd->base + SCSI_Cntl);
+ return 0;
+ }
+ mdelay(1);
+ } while (--timeout);
+ fdomain_make_bus_idle(fd);
+ return 1;
+}
+
+static void fdomain_finish_cmd(struct fdomain *fd, int result)
+{
+ outb(0x00, fd->base + Interrupt_Cntl);
+ fdomain_make_bus_idle(fd);
+ fd->cur_cmd->result = result;
+ fd->cur_cmd->scsi_done(fd->cur_cmd);
+ fd->cur_cmd = NULL;
+}
+
+static void fdomain_read_data(struct scsi_cmnd *cmd)
+{
+ struct fdomain *fd = shost_priv(cmd->device->host);
+ unsigned int len;
+
+ while ((len = inw(fd->base + FIFO_Data_Count)) > 0) {
+ if (len > cmd->SCp.this_residual)
+ len = cmd->SCp.this_residual;
+ if (len == 1)
+ *cmd->SCp.ptr = inb(fd->base + Read_FIFO);
+ if (len > 1) {
+ insw(fd->base + Read_FIFO, cmd->SCp.ptr, len >> 1);
+ len = round_down(len, 2);
+ }
+ cmd->SCp.ptr += len;
+ cmd->SCp.this_residual -= len;
+ if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
+ --cmd->SCp.buffers_residual;
+ ++cmd->SCp.buffer;
+ cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
+ cmd->SCp.this_residual = cmd->SCp.buffer->length;
+ }
+ }
+}
+
+static void fdomain_write_data(struct scsi_cmnd *cmd)
+{
+ struct fdomain *fd = shost_priv(cmd->device->host);
+ /* 8k FIFO for pre-tmc18c30 chips, 2k FIFO for tmc18c30 */
+ int FIFO_Size = fd->chip == tmc18c30 ? 0x800 : 0x2000;
+ unsigned int len;
+
+ while ((len = FIFO_Size - inw(fd->base + FIFO_Data_Count)) > 512) {
+ if (len > cmd->SCp.this_residual)
+ len = cmd->SCp.this_residual;
+ if (len == 1)
+ outb(*cmd->SCp.ptr, fd->base + Write_FIFO);
+ if (len > 1) {
+ outsw(fd->base + Write_FIFO, cmd->SCp.ptr, len >> 1);
+ len = round_down(len, 2);
+ }
+ cmd->SCp.ptr += len;
+ cmd->SCp.this_residual -= len;
+ if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
+ --cmd->SCp.buffers_residual;
+ ++cmd->SCp.buffer;
+ cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
+ cmd->SCp.this_residual = cmd->SCp.buffer->length;
+ } else if (!cmd->SCp.this_residual &&
+ !cmd->SCp.buffers_residual)
+ break;
+ }
+}
+
+static void fdomain_work(struct work_struct *work)
+{
+ struct fdomain *fd = container_of(work, struct fdomain, work);
+ struct Scsi_Host *sh = container_of((void *)fd, struct Scsi_Host,
+ hostdata);
+ struct scsi_cmnd *cmd = fd->cur_cmd;
+ unsigned long flags;
+ int status;
+ int done = 0;
+
+ /* Abort calls fdomain_finish_cmd, so we do nothing here. */
+ if (cmd->SCp.phase & aborted)
+ ;
+
+ spin_lock_irqsave(sh->host_lock, flags);
+
+ if (cmd->SCp.phase & in_arbitration) {
+ status = inb(fd->base + TMC_Status);
+ if (!(status & 0x02)) {
+ fdomain_finish_cmd(fd, DID_BUS_BUSY << 16);
+ goto out;
+ }
+ cmd->SCp.phase = in_selection;
+
+ outb(0x40 | FIFO_COUNT, fd->base + Interrupt_Cntl);
+ outb(0x82, fd->base + SCSI_Cntl); /* Bus Enable + Select */
+ outb(BIT(cmd->device->host->this_id) |
+ BIT(scmd_id(cmd)), fd->base + SCSI_Data_NoACK);
+ /* Stop arbitration and enable parity */
+ outb(0x10 | PARITY_MASK, fd->base + TMC_Cntl);
+ goto out;
+ } else if (cmd->SCp.phase & in_selection) {
+ status = inb(fd->base + SCSI_Status);
+ if (!(status & 0x01)) {
+ /* Try again, for slow devices */
+ if (fdomain_select(cmd->device->host, scmd_id(cmd))) {
+ fdomain_finish_cmd(fd, DID_NO_CONNECT << 16);
+ goto out;
+ }
+ /* Stop arbitration and enable parity */
+ outb(0x10 | PARITY_MASK, fd->base + TMC_Cntl);
+ }
+ cmd->SCp.phase = in_other;
+ outb(0x90 | FIFO_COUNT, fd->base + Interrupt_Cntl);
+ outb(0x80, fd->base + SCSI_Cntl);
+ goto out;
+ }
+
+ /* cur_cmd->SCp.phase == in_other: this is the body of the routine */
+ status = inb(fd->base + SCSI_Status);
+
+ if (status & 0x10) { /* REQ */
+ switch (status & 0x0e) {
+ case 0x08: /* COMMAND OUT */
+ outb(cmd->cmnd[cmd->SCp.sent_command++],
+ fd->base + Write_SCSI_Data);
+ break;
+ case 0x00: /* DATA OUT -- tmc18c50/tmc18c30 only */
+ if (fd->chip != tmc1800 && !cmd->SCp.have_data_in) {
+ cmd->SCp.have_data_in = -1;
+ outb(0xd0 | PARITY_MASK, fd->base + TMC_Cntl);
+ }
+ break;
+ case 0x04: /* DATA IN -- tmc18c50/tmc18c30 only */
+ if (fd->chip != tmc1800 && !cmd->SCp.have_data_in) {
+ cmd->SCp.have_data_in = 1;
+ outb(0x90 | PARITY_MASK, fd->base + TMC_Cntl);
+ }
+ break;
+ case 0x0c: /* STATUS IN */
+ cmd->SCp.Status = inb(fd->base + Read_SCSI_Data);
+ break;
+ case 0x0a: /* MESSAGE OUT */
+ outb(MESSAGE_REJECT, fd->base + Write_SCSI_Data);
+ break;
+ case 0x0e: /* MESSAGE IN */
+ cmd->SCp.Message = inb(fd->base + Read_SCSI_Data);
+ if (!cmd->SCp.Message)
+ ++done;
+ break;
+ }
+ }
+
+ if (fd->chip == tmc1800 && !cmd->SCp.have_data_in
+ && (cmd->SCp.sent_command >= cmd->cmd_len)) {
+ if (cmd->sc_data_direction == DMA_TO_DEVICE) {
+ cmd->SCp.have_data_in = -1;
+ outb(0xd0 | PARITY_MASK, fd->base + TMC_Cntl);
+ } else {
+ cmd->SCp.have_data_in = 1;
+ outb(0x90 | PARITY_MASK, fd->base + TMC_Cntl);
+ }
+ }
+
+ if (cmd->SCp.have_data_in == -1) /* DATA OUT */
+ fdomain_write_data(cmd);
+
+ if (cmd->SCp.have_data_in == 1) /* DATA IN */
+ fdomain_read_data(cmd);
+
+ if (done) {
+ fdomain_finish_cmd(fd, (cmd->SCp.Status & 0xff) |
+ ((cmd->SCp.Message & 0xff) << 8) |
+ (DID_OK << 16));
+ } else {
+ if (cmd->SCp.phase & disconnect) {
+ outb(0xd0 | FIFO_COUNT, fd->base + Interrupt_Cntl);
+ outb(0x00, fd->base + SCSI_Cntl);
+ } else
+ outb(0x90 | FIFO_COUNT, fd->base + Interrupt_Cntl);
+ }
+out:
+ spin_unlock_irqrestore(sh->host_lock, flags);
+}
+
+static irqreturn_t fdomain_irq(int irq, void *dev_id)
+{
+ struct fdomain *fd = dev_id;
+
+ /* Is it our IRQ? */
+ if ((inb(fd->base + TMC_Status) & 0x01) == 0)
+ return IRQ_NONE;
+
+ outb(0x00, fd->base + Interrupt_Cntl);
+
+ /* We usually have one spurious interrupt after each command. */
+ if (!fd->cur_cmd) /* Spurious interrupt */
+ return IRQ_NONE;
+
+ schedule_work(&fd->work);
+
+ return IRQ_HANDLED;
+}
+
+static int fdomain_queue(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
+{
+ struct fdomain *fd = shost_priv(cmd->device->host);
+ unsigned long flags;
+
+ /* Initialize static data */
+ if (scsi_sg_count(cmd)) {
+ cmd->SCp.buffer = scsi_sglist(cmd);
+ cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
+ cmd->SCp.this_residual = cmd->SCp.buffer->length;
+ cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
+ } else {
+ cmd->SCp.ptr = NULL;
+ cmd->SCp.this_residual = 0;
+ cmd->SCp.buffer = NULL;
+ cmd->SCp.buffers_residual = 0;
+ }
+ cmd->SCp.Status = 0;
+ cmd->SCp.Message = 0;
+ cmd->SCp.have_data_in = 0;
+ cmd->SCp.sent_command = 0;
+ cmd->SCp.phase = in_arbitration;
+
+ spin_lock_irqsave(sh->host_lock, flags);
+
+ fd->cur_cmd = cmd;
+
+ fdomain_make_bus_idle(fd);
+
+ /* Start arbitration */
+ outb(0x00, fd->base + Interrupt_Cntl);
+ outb(0x00, fd->base + SCSI_Cntl); /* Disable data drivers */
+ outb(BIT(cmd->device->host->this_id),
+ fd->base + SCSI_Data_NoACK); /* Set our id bit */
+ outb(0x20, fd->base + Interrupt_Cntl);
+ outb(0x14 | PARITY_MASK, fd->base + TMC_Cntl); /* Start arbitration */
+
+ spin_unlock_irqrestore(sh->host_lock, flags);
+
+ return 0;
+}
+
+static int fdomain_abort(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *sh = cmd->device->host;
+ struct fdomain *fd = shost_priv(sh);
+ unsigned long flags;
+
+ if (!fd->cur_cmd)
+ return FAILED;
+
+ spin_lock_irqsave(sh->host_lock, flags);
+
+ fdomain_make_bus_idle(fd);
+ fd->cur_cmd->SCp.phase |= aborted;
+ fd->cur_cmd->result = DID_ABORT << 16;
+
+ /* Aborts are not done well. . . */
+ fdomain_finish_cmd(fd, DID_ABORT << 16);
+ spin_unlock_irqrestore(sh->host_lock, flags);
+ return SUCCESS;
+}
+
+int fdomain_host_reset(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *sh = cmd->device->host;
+ struct fdomain *fd = shost_priv(sh);
+ unsigned long flags;
+
+ spin_lock_irqsave(sh->host_lock, flags);
+ fdomain_reset(fd->base);
+ spin_lock_irqsave(sh->host_lock, flags);
+ return SUCCESS;
+}
+
+static int fdomain_biosparam(struct scsi_device *sdev,
+ struct block_device *bdev, sector_t capacity,
+ int geom[])
+{
+ unsigned char *p = scsi_bios_ptable(bdev);
+
+ if (p && p[65] == 0xaa && p[64] == 0x55 /* Partition table valid */
+ && p[4]) { /* Partition type */
+ geom[0] = p[5] + 1; /* heads */
+ geom[1] = p[6] & 0x3f; /* sectors */
+ } else {
+ if (capacity >= 0x7e0000) {
+ geom[0] = 255; /* heads */
+ geom[1] = 63; /* sectors */
+ } else if (capacity >= 0x200000) {
+ geom[0] = 128; /* heads */
+ geom[1] = 63; /* sectors */
+ } else {
+ geom[0] = 64; /* heads */
+ geom[1] = 32; /* sectors */
+ }
+ }
+ geom[2] = sector_div(capacity, geom[0] * geom[1]);
+ kfree(p);
+
+ return 0;
+}
+
+struct scsi_host_template fdomain_template = {
+ .module = THIS_MODULE,
+ .name = "Future Domain TMC-16x0",
+ .proc_name = "fdomain",
+ .queuecommand = fdomain_queue,
+ .eh_abort_handler = fdomain_abort,
+ .eh_host_reset_handler = fdomain_host_reset,
+ .bios_param = fdomain_biosparam,
+ .can_queue = 1,
+ .this_id = 7,
+ .sg_tablesize = 64,
+ .dma_boundary = PAGE_SIZE - 1,
+};
+
+struct Scsi_Host *fdomain_create(int base, int irq, int this_id,
+ unsigned long bios_base, struct signature *sig,
+ struct device *dev)
+{
+ struct Scsi_Host *sh;
+ struct fdomain *fd;
+ enum chip_type chip;
+ static const char * const chip_names[] = {
+ "Unknown", "TMC-1800", "TMC-18C50", "TMC-18C30"
+ };
+
+ chip = fdomain_identify(base);
+ if (!chip)
+ return NULL;
+
+ fdomain_reset(base);
+
+ if (fdomain_test_loopback(base))
+ return NULL;
+
+ if (!irq) {
+ if (dev_is_pci(dev)) {
+ dev_err(dev, "PCI card has no IRQ assigned");
+ return NULL;
+ }
+ irq = irqs[(inb(base + Configuration1) & 0x0e) >> 1];
+ }
+
+ sh = scsi_host_alloc(&fdomain_template, sizeof(struct fdomain));
+ if (!sh)
+ return NULL;
+
+ if (this_id)
+ sh->this_id = this_id & 0x07;
+ else if (sig && (sig->bios_major > 0) &&
+ (sig->bios_major < 3 || sig->bios_minor < 2))
+ sh->this_id = 6;
+
+ sh->irq = irq;
+ sh->io_port = base;
+ sh->n_io_port = FDOMAIN_REGION_SIZE;
+
+ fd = shost_priv(sh);
+ fd->base = base;
+ fd->chip = chip;
+ INIT_WORK(&fd->work, fdomain_work);
+
+ if (request_irq(irq, fdomain_irq, dev_is_pci(dev) ? IRQF_SHARED : 0,
+ "fdomain", fd))
+ goto fail_put;
+
+ if (!sig || (sig->bios_major < 0 && sig->bios_minor < 0))
+ shost_printk(KERN_INFO, sh, "No BIOS; using SCSI ID %d\n",
+ sh->this_id);
+ else {
+ char v1 = (sig->bios_major >= 0) ? '0' + sig->bios_major : '?';
+ char v2 = (sig->bios_minor >= 0) ? '0' + sig->bios_minor : '?';
+
+ shost_printk(KERN_INFO, sh, "BIOS version %c.%c at 0x%lx using SCSI ID %d\n",
+ v1, v2, bios_base, sh->this_id);
+ }
+ shost_printk(KERN_INFO, sh, "%s chip at 0x%x irq %d\n",
+ dev_is_pci(dev) ? "TMC-36C70 (PCI bus)" : chip_names[chip],
+ base, irq);
+
+ if (scsi_add_host(sh, dev))
+ goto fail_free_irq;
+
+ scsi_scan_host(sh);
+
+ return sh;
+
+fail_free_irq:
+ free_irq(irq, fd);
+fail_put:
+ scsi_host_put(sh);
+ return NULL;
+}
+EXPORT_SYMBOL(fdomain_create);
+
+int fdomain_destroy(struct Scsi_Host *sh)
+{
+ struct fdomain *fd = shost_priv(sh);
+
+ cancel_work_sync(&fd->work);
+ scsi_remove_host(sh);
+ if (sh->irq)
+ free_irq(sh->irq, fd);
+ scsi_host_put(sh);
+ return 0;
+}
+EXPORT_SYMBOL(fdomain_destroy);
+
+#ifdef CONFIG_PM_SLEEP
+static int fdomain_resume(struct device *dev)
+{
+ struct fdomain *fd = shost_priv(dev_get_drvdata(dev));
+
+ fdomain_reset(fd->base);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(fdomain_pm_ops, NULL, fdomain_resume);
+#endif /* CONFIG_PM_SLEEP */
+
+MODULE_AUTHOR("Ondrej Zary, Rickard E. Faith");
+MODULE_DESCRIPTION("Future Domain TMC-16x0/TMC-3260 SCSI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/fdomain.h b/drivers/scsi/fdomain.h
new file mode 100644
index 000000000000..ab1a65d7db1f
--- /dev/null
+++ b/drivers/scsi/fdomain.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#define FDOMAIN_REGION_SIZE 0x10
+#define FDOMAIN_BIOS_SIZE 0x2000
+
+#ifdef CONFIG_PM_SLEEP
+static const struct dev_pm_ops fdomain_pm_ops;
+#define FDOMAIN_PM_OPS (&fdomain_pm_ops)
+#else
+#define FDOMAIN_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+struct signature {
+ const char *signature;
+ int offset;
+ int length;
+ int bios_major;
+ int bios_minor;
+ int flag; /* 1 = PCI_bus, 2 = ISA_200S, 3 = ISA_250MG, 4 = ISA_200S */
+};
+
+struct Scsi_Host *fdomain_create(int base, int irq, int this_id,
+ unsigned long bios_base, struct signature *sig,
+ struct device *dev);
+int fdomain_destroy(struct Scsi_Host *sh);
--
Ondrej Zary
Powered by blists - more mailing lists