[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAEnQRZD5506EdkO5ESwWe+=J-uEeZw9m47_XNj8DUHy4Hck78g@mail.gmail.com>
Date: Tue, 23 Apr 2019 09:22:48 +0300
From: Daniel Baluta <daniel.baluta@...il.com>
To: Marco Felsch <m.felsch@...gutronix.de>
Cc: Daniel Baluta <daniel.baluta@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
Aisheng Dong <aisheng.dong@....com>,
Peng Fan <peng.fan@....com>, Anson Huang <anson.huang@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
dl-linux-imx <linux-imx@....com>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"S.j. Wang" <shengjiu.wang@....com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2 2/2] arm64: dts: imx8mm-evk: Enable audio codec wm8524
Hi Marco,
On Tue, Apr 23, 2019 at 8:19 AM Marco Felsch <m.felsch@...gutronix.de> wrote:
>
> Hi Daniel,
>
> On 19-04-22 19:36, Daniel Baluta wrote:
> > i.MX8MM has one wm8524 audio codec connected with
> > SAI3 digital audio interface.
> >
> > This patch uses simple-card machine driver in order
> > to enable wm8524 codec.
> >
> > We need to set:
> > * SAI3 pinctrl configuration
> > * clock hierarchy
> > * codec node
> > * simple-card configuration
> >
> > Signed-off-by: Daniel Baluta <daniel.baluta@....com>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 48 ++++++++++++++++++++
> > 1 file changed, 48 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> > index 2d5d89475b76..207b13266a96 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> > @@ -37,6 +37,35 @@
> > gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> > enable-active-high;
> > };
> > +
> > + wm8524: audio-codec {
> > + #sound-dai-cells = <0>;
> > + compatible = "wlf,wm8524";
> > + wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
>
> I would mux the gpio where I use them.
I'm not sure I understand this. Can you provide an example.
>
> > + };
> > +
> > + sound-wm8524 {
> > + compatible = "simple-audio-card";
> > + simple-audio-card,name = "wm8524-audio";
> > + simple-audio-card,format = "i2s";
> > + simple-audio-card,frame-master = <&cpudai>;
> > + simple-audio-card,bitclock-master = <&cpudai>;
> > + simple-audio-card,widgets =
> > + "Line", "Left Line Out Jack",
> > + "Line", "Right Line Out Jack";
> > + simple-audio-card,routing =
> > + "Left Line Out Jack", "LINEVOUTL",
> > + "Right Line Out Jack", "LINEVOUTR";
> > +
> > + cpudai: simple-audio-card,cpu {
> > + sound-dai = <&sai3>;
> > + };
> > +
> > + link_codec: simple-audio-card,codec {
>
> Can you drop that phandle?
I see your point here. But for symmetry and consistency with
imx8mm-evk I would prefer
to keep it like that.
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/tree/arch/arm64/boot/dts/freescale/imx8mq-evk.dts?h=for-next#n59
Powered by blists - more mailing lists