Message-ID: <20190423115611.GA5604@linux.intel.com>
Date:   Tue, 23 Apr 2019 14:56:11 +0300
From:   Jarkko Sakkinen <jarkko.sakkinen@...ux.intel.com>
To:     linux-kernel@...r.kernel.org, x86@...nel.org,
        linux-sgx@...r.kernel.org
Cc:     akpm@...ux-foundation.org, dave.hansen@...el.com,
        sean.j.christopherson@...el.com, nhorman@...hat.com,
        npmccallum@...hat.com, serge.ayoun@...el.com,
        shay.katz-zamir@...el.com, haitao.huang@...el.com,
        andriy.shevchenko@...ux.intel.com, tglx@...utronix.de,
        kai.svahn@...el.com, bp@...en8.de, josh@...htriplett.org,
        luto@...nel.org, kai.huang@...el.com, rientjes@...gle.com
Subject: Re: [PATCH v20 00/28] Intel SGX1 support

On Wed, Apr 17, 2019 at 01:39:10PM +0300, Jarkko Sakkinen wrote:
> Intel(R) SGX is a set of CPU instructions that can be used by applications
> to set aside private regions of code and data. The code outside the enclave
> is disallowed to access the memory inside the enclave by the CPU access
> control.  In a way you can think that SGX provides inverted sandbox. It
> protects the application from a malicious host.
> 
> There is a new hardware unit in the processor called Memory Encryption
> Engine (MEE) starting from the Skylake microacrhitecture. BIOS can define
> one or many MEE regions that can hold enclave data by configuring them with
> PRMRR registers.
> 
> The MEE automatically encrypts the data leaving the processor package to
> the MEE regions. The data is encrypted using a random key whose life-time
> is exactly one power cycle.
> 
> The current implementation requires that the firmware sets
> IA32_SGXLEPUBKEYHASH* MSRs as writable so that ultimately the kernel can
> decide what enclaves it wants run. The implementation does not create
> any bottlenecks to support read-only MSRs later on.
> 
> You can tell if your CPU supports SGX by looking into /proc/cpuinfo:
> 
> 	cat /proc/cpuinfo  | grep sgx
> 
> v20:
> * Fine-tune Kconfig messages and spacing and remove MMU_NOTIFIER
>   dependency as MMU notifiers are no longer used in the driver.
> * Use mm_users instead of mm_count as refcount for mm_struct as mm_count
>   only protects from deleting mm_struct, not removing its contents.
> * Sanitize EPC when the reclaimer thread starts by doing EREMOVE for all
>   of them. They could be in initialized state when the kernel starts
>   because it might be spawned by kexec().
> * Documentation overhaul.
> * Use a device /dev/sgx/provision for delivering the provision token
>   instead of securityfs.
> * Create a reference to the enclave when already when opening
>   /dev/sgx/enclave.  The file is then associated with this enclave only.
>   mmap() can be done at free at any point and always get a reference to
>   the enclave. To summarize the file now represents the enclave.
> 
> v19:
> * Took 3-4 months but in some sense this was more like a rewrite of most
>   of the corners of the source code. If I've forgotten to deal with some
>   feedback, please don't shout me. Make a remark and I will fix it for
>   the next version. Hopefully there won't be this big turnovers anymore.
> * Validate SECS attributes properly against CPUID given attributes and
>   against allowed attributes. SECS attributes are the ones that are
>   enforced whereas SIGSTRUCT attributes tell what is required to run
>   the enclave.
> * Add KSS (Key Sharing Support) to the enclave attributes.
> * Deny MAP_PRIVATE as an enclave is always a shared memory entity.
> * Revert back to shmem backing storage so that it can be easily shared
>   by multiple processes.
> * Split the recognization of an ENCLS leaf failure by using three
>   functions to detect it: encsl_faulted(), encls_returned_code() and
>   sgx_failed(). encls_failed() is only caused by a spurious expections that
>   should never happen. Thus, it is not defined as an inline function in
>   order to easily insert a kprobe to it.
> * Move low-level enclave management routines, page fault handler and page
>   reclaiming routines from driver to the core. These cannot be separated
>   from each other as they are heavily interdependent. The rationale is that
>   the core does not call any code from the driver.
> * Allow the driver to be compiled as a module now that it no code is using
>   its routines and it only uses exported symbols. Now the driver is
>   essentially just a thin ioctl layer.
> * Reworked the driver to maintain a list of mm_struct's. The VMA callbacks
>   add new entries to this list as the process is forked. Each entry has
>   its own refcount because they have a different life-cycle as the enclave
>   does. In effect @tgid and @mm have been removed from struct sgx_encl
>   and we allow forking by removing VM_DONTCOPY from vm flags.
> * Generate a cpu mask in the reclaimer from the cpu mask's of all
>   mm_struct's. This will kick out the hardware threads out of the enclave
>   from multiple processes. It is not a local variable because it would
>   eat too much of the stack space but instead a field in struct
>   sgx_encl.
> * Allow forking i.e. remove VM_DONTCOPY. I did not change the API
>   because the old API scaled to the workload that Andy described. The
>   codebase is now mostly API independent i.e. changing the API is a
>   small task. For me the proper trigger to chanage it is a as concrete
>   as possible workload that cannot be fulfilled. I hope you understand
>   my thinking here. I don't want to change anything w/o proper basis
>   but I'm ready to change anything if there is a proper basis. I do
>   not have any kind of attachment to any particular type of API.
> * Add Sean's vDSO ENCLS(EENTER) patches and update selftest to use the
>   new vDSO.
> 
> v18:
> * Update the ioctl-number.txt.
> * Move the driver under arch/x86.
> * Add SGX features (SGX, SGX1, SGX2) to the disabled-features.h.
> * Rename the selftest as test_sgx (previously sgx-selftest).
> * In order to enable process accounting, swap EPC pages and PCMD's to a VMA
>   instead of shmem.
> * Allow only to initialize and run enclaves with a subset of
>   {DEBUG, MODE64BIT} set.
> * Add SGX_IOC_ENCLAVE_SET_ATTRIBUTE to allow an enclave to have privileged
>   attributes e.g. PROVISIONKEY.
> 
> v17:
> * Add a simple selftest.
> * Fix a null pointer dereference to section->pages when its
>   allocation fails.
> * Add Sean's description of the exception handling to the documentation.
> 
> v16:
> * Fixed SOB's in the commits that were a bit corrupted in v15.
> * Implemented exceptio handling properly to detect_sgx().
> * Use GENMASK() to define SGX_CPUID_SUB_LEAF_TYPE_MASK.
> * Updated the documentation to use rst definition lists.
> * Added the missing Documentation/x86/index.rst, which has a link to
>   intel_sgx.rst. Now the SGX and uapi documentation is properly generated
>   with 'make htmldocs'.
> * While enumerating EPC sections, if an undefined section is found, fail
>   the driver initialization instead of continuing the initialization.
> * Issue a warning if there are more than %SGX_MAX_EPC_SECTIONS.
> * Remove copyright notice from arch/x86/include/asm/sgx.h.
> * Migrated from ioremap_cache() to memremap().
> 
> v15:
> * Split into more digestable size patches.
> * Lots of small fixes and clean ups.
> * Signal a "plain" SIGSEGV on an EPCM violation.
> 
> v14:
> * Change the comment about X86_FEATURE_SGX_LC from “SGX launch
>   configuration” to “SGX launch control”.
> * Move the SGX-related CPU feature flags as part of the Linux defined
>   virtual leaf 8.
> * Add SGX_ prefix to the constants defining the ENCLS leaf functions.
> * Use GENMASK*() and BIT*() in sgx_arch.h instead of raw hex numbers.
> * Refine the long description for CONFIG_INTEL_SGX_CORE.
> * Do not use pr_*_ratelimited()  in the driver. The use of the rate limited
>   versions is legacy cruft from the prototyping phase.
> * Detect sleep with SGX_INVALID_EINIT_TOKEN instead of counting power
>   cycles.
> * Manually prefix with “sgx:” in the core SGX code instead of redefining
>   pr_fmt.
> * Report if IA32_SGXLEPUBKEYHASHx MSRs are not writable in the driver
>   instead of core because it is a driver requirement.
> * Change prompt to bool in the entry for CONFIG_INTEL_SGX_CORE because the
>   default is ‘n’.
> * Rename struct sgx_epc_bank as struct sgx_epc_section in order to match
>   the SDM.
> * Allocate struct sgx_epc_page instances one at a time.
> * Use “__iomem void *” pointers for the mapped EPC memory consistently.
> * Retry once on SGX_INVALID_TOKEN in sgx_einit() instead of counting power
>   cycles.
> * Call enclave swapping operations directly from the driver instead of
>   calling them .indirectly through struct sgx_epc_page_ops because indirect
>   calls are not required yet as the patch set does not contain the KVM
>   support.
> * Added special signal SEGV_SGXERR to notify about SGX EPCM violation
>   errors.
> 
> v13:
> * Always use SGX_CPUID constant instead of a hardcoded value.
> * Simplified and documented the macros and functions for ENCLS leaves.
> * Enable sgx_free_page() to free active enclave pages on demand
>   in order to allow sgx_invalidate() to delete enclave pages.
>   It no longer performs EREMOVE if a page is in the process of
>   being reclaimed.
> * Use PM notifier per enclave so that we don't have to traverse
>   the global list of active EPC pages to find enclaves.
> * Removed unused SGX_LE_ROLLBACK constant from uapi/asm/sgx.h
> * Always use ioremap() to map EPC banks as we only support 64-bit kernel.
> * Invalidate IA32_SGXLEPUBKEYHASH cache used by sgx_einit() when going
>   to sleep.
> 
> v12:
> * Split to more narrow scoped commits in order to ease the review process and
>   use co-developed-by tag for co-authors of commits instead of listing them in
>   the source files.
> * Removed cruft EXPORT_SYMBOL() declarations and converted to static variables.
> * Removed in-kernel LE i.e. this version of the SGX software stack only
>   supports unlocked IA32_SGXLEPUBKEYHASHx MSRs.
> * Refined documentation on launching enclaves, swapping and enclave
>   construction.
> * Refined sgx_arch.h to include alignment information for every struct that
>   requires it and removed structs that are not needed without an LE.
> * Got rid of SGX_CPUID.
> * SGX detection now prints log messages about firmware configuration issues.
> 
> v11:
> * Polished ENCLS wrappers with refined exception handling.
> * ksgxswapd was not stopped (regression in v5) in
>   sgx_page_cache_teardown(), which causes a leaked kthread after driver
>   deinitialization.
> * Shutdown sgx_le_proxy when going to suspend because its EPC pages will be
>   invalidated when resuming, which will cause it not function properly
>   anymore.
> * Set EINITTOKEN.VALID to zero for a token that is passed when
>   SGXLEPUBKEYHASH matches MRSIGNER as alloc_page() does not give a zero
>   page.
> * Fixed the check in sgx_edbgrd() for a TCS page. Allowed to read offsets
>   around the flags field, which causes a #GP. Only flags read is readable.
> * On read access memcpy() call inside sgx_vma_access() had src and dest
>   parameters in wrong order.
> * The build issue with CONFIG_KASAN is now fixed. Added undefined symbols
>   to LE even if “KASAN_SANITIZE := false” was set in the makefile.
> * Fixed a regression in the #PF handler. If a page has
>   SGX_ENCL_PAGE_RESERVED flag the #PF handler should unconditionally fail.
>   It did not, which caused weird races when trying to change other parts of
>   swapping code.
> * EPC management has been refactored to a flat LRU cache and moved to
>   arch/x86. The swapper thread reads a cluster of EPC pages and swaps all
>   of them. It can now swap from multiple enclaves in the same round.
> * For the sake of consistency with SGX_IOC_ENCLAVE_ADD_PAGE, return -EINVAL
>   when an enclave is already initialized or dead instead of zero.
> 
> v10:
> * Cleaned up anon inode based IPC between the ring-0 and ring-3 parts
>   of the driver.
> * Unset the reserved flag from an enclave page if EDBGRD/WR fails
>   (regression in v6).
> * Close the anon inode when LE is stopped (regression in v9).
> * Update the documentation with a more detailed description of SGX.
> 
> v9:
> * Replaced kernel-LE IPC based on pipes with an anonymous inode.
>   The driver does not require anymore new exports.
> 
> v8:
> * Check that public key MSRs match the LE public key hash in the
>   driver initialization when the MSRs are read-only.
> * Fix the race in VA slot allocation by checking the fullness
>   immediately after succeesful allocation.
> * Fix the race in hash mrsigner calculation between the launch
>   enclave and user enclaves by having a separate lock for hash
>   calculation.
> 
> v7:
> * Fixed offset calculation in sgx_edbgr/wr(). Address was masked with PAGE_MASK
>   when it should have been masked with ~PAGE_MASK.
> * Fixed a memory leak in sgx_ioc_enclave_create().
> * Simplified swapping code by using a pointer array for a cluster
>   instead of a linked list.
> * Squeezed struct sgx_encl_page to 32 bytes.
> * Fixed deferencing of an RSA key on OpenSSL 1.1.0.
> * Modified TC's CMAC to use kernel AES-NI. Restructured the code
>   a bit in order to better align with kernel conventions.
> 
> v6:
> * Fixed semaphore underrun when accessing /dev/sgx from the launch enclave.
> * In sgx_encl_create() s/IS_ERR(secs)/IS_ERR(encl)/.
> * Removed virtualization chapter from the documentation.
> * Changed the default filename for the signing key as signing_key.pem.
> * Reworked EPC management in a way that instead of a linked list of
>   struct sgx_epc_page instances there is an array of integers that
>   encodes address and bank of an EPC page (the same data as 'pa' field
>   earlier). The locking has been moved to the EPC bank level instead
>   of a global lock.
> * Relaxed locking requirements for EPC management. EPC pages can be
>   released back to the EPC bank concurrently.
> * Cleaned up ptrace() code.
> * Refined commit messages for new architectural constants.
> * Sorted includes in every source file.
> * Sorted local variable declarations according to the line length in
>   every function.
> * Style fixes based on Darren's comments to sgx_le.c.
> 
> v5:
> * Described IPC between the Launch Enclave and kernel in the commit messages.
> * Fixed all relevant checkpatch.pl issues that I have forgot fix in earlier
>   versions except those that exist in the imported TinyCrypt code.
> * Fixed spelling mistakes in the documentation.
> * Forgot to check the return value of sgx_drv_subsys_init().
> * Encapsulated properly page cache init and teardown.
> * Collect epc pages to a temp list in sgx_add_epc_bank
> * Removed SGX_ENCLAVE_INIT_ARCH constant.
> 
> v4:
> * Tied life-cycle of the sgx_le_proxy process to /dev/sgx.
> * Removed __exit annotation from sgx_drv_subsys_exit().
> * Fixed a leak of a backing page in sgx_process_add_page_req() in the
>   case when vm_insert_pfn() fails.
> * Removed unused symbol exports for sgx_page_cache.c.
> * Updated sgx_alloc_page() to require encl parameter and documented the
>   behavior (Sean Christopherson).
> * Refactored a more lean API for sgx_encl_find() and documented the behavior.
> * Moved #PF handler to sgx_fault.c.
> * Replaced subsys_system_register() with plain bus_register().
> * Retry EINIT 2nd time only if MSRs are not locked.
> 
> v3:
> * Check that FEATURE_CONTROL_LOCKED and FEATURE_CONTROL_SGX_ENABLE are set.
> * Return -ERESTARTSYS in __sgx_encl_add_page() when sgx_alloc_page() fails.
> * Use unused bits in epc_page->pa to store the bank number.
> * Removed #ifdef for WQ_NONREENTRANT.
> * If mmu_notifier_register() fails with -EINTR, return -ERESTARTSYS.
> * Added --remove-section=.got.plt to objcopy flags in order to prevent a
>   dummy .got.plt, which will cause an inconsistent size for the LE.
> * Documented sgx_encl_* functions.
> * Added remark about AES implementation used inside the LE.
> * Removed redundant sgx_sys_exit() from le/main.c.
> * Fixed struct sgx_secinfo alignment from 128 to 64 bytes.
> * Validate miscselect in sgx_encl_create().
> * Fixed SSA frame size calculation to take the misc region into account.
> * Implemented consistent exception handling to __encls() and __encls_ret().
> * Implemented a proper device model in order to allow sysfs attributes
>   and in-kernel API.
> * Cleaned up various "find enclave" implementations to the unified
>   sgx_encl_find().
> * Validate that vm_pgoff is zero.
> * Discard backing pages with shmem_truncate_range() after EADD.
> * Added missing EEXTEND operations to LE signing and launch.
> * Fixed SSA size for GPRS region from 168 to 184 bytes.
> * Fixed the checks for TCS flags. Now DBGOPTIN is allowed.
> * Check that TCS addresses are in ELRANGE and not just page aligned.
> * Require kernel to be compiled with X64_64 and CPU_SUP_INTEL.
> * Fixed an incorrect value for SGX_ATTR_DEBUG from 0x01 to 0x02.
> 
> v2:
> * get_rand_uint32() changed the value of the pointer instead of value
>   where it is pointing at.
> * Launch enclave incorrectly used sigstruct attributes-field instead of
>   enclave attributes-field.
> * Removed unused struct sgx_add_page_req from sgx_ioctl.c
> * Removed unused sgx_has_sgx2.
> * Updated arch/x86/include/asm/sgx.h so that it provides stub
>   implementations when sgx in not enabled.
> * Removed cruft rdmsr-calls from sgx_set_pubkeyhash_msrs().
> * return -ENOMEM in sgx_alloc_page() when VA pages consume too much space
> * removed unused global sgx_nr_pids
> * moved sgx_encl_release to sgx_encl.c
> * return -ERESTARTSYS instead of -EINTR in sgx_encl_init()
> 
> Jarkko Sakkinen (11):
>   x86/sgx: Add ENCLS architectural error codes
>   x86/sgx: Add SGX1 and SGX2 architectural data structures
>   x86/sgx: Add wrappers for ENCLS leaf functions
>   x86/sgx: Add functions to allocate and free EPC pages
>   x86/sgx: Add the Linux SGX Enclave Driver
>   x86/sgx: Add provisioning
>   x86/sgx: Add swapping code to the core and SGX driver
>   x86/sgx: ptrace() support for the SGX driver
>   selftests/x86: Add a selftest for SGX
>   x86/sgx: Update MAINTAINERS
>   docs: x86/sgx: Document the enclave API
> 
> Kai Huang (2):
>   x86/cpufeatures: Add Intel-defined SGX feature bit
>   x86/cpufeatures: Add Intel-defined SGX_LC feature bit
> 
> Sean Christopherson (15):
>   x86/cpufeatures: Add SGX sub-features (as Linux-defined bits)
>   x86/msr: Add IA32_FEATURE_CONTROL.SGX_ENABLE definition
>   x86/msr: Add SGX Launch Control MSR definitions
>   x86/mm: x86/sgx: Add new 'PF_SGX' page fault error code bit
>   x86/mm: x86/sgx: Signal SIGSEGV for userspace #PFs w/ PF_SGX
>   x86/cpu/intel: Detect SGX support and update caps appropriately
>   x86/sgx: Enumerate and track EPC sections
>   x86/sgx: Add sgx_einit() for initializing enclaves
>   x86/vdso: Add support for exception fixup in vDSO functions
>   x86/fault: Add helper function to sanitize error code
>   x86/fault: Attempt to fixup unhandled #PF in vDSO before signaling
>   x86/traps: Attempt to fixup exceptions in vDSO before signaling
>   x86/vdso: Add __vdso_sgx_enter_enclave() to wrap SGX enclave
>     transitions
>   docs: x86/sgx: Add Architecture documentation
>   docs: x86/sgx: Document kernel internals
> 
>  Documentation/index.rst                       |   1 +
>  Documentation/ioctl/ioctl-number.txt          |   1 +
>  Documentation/x86/index.rst                   |  10 +
>  Documentation/x86/sgx/1.Architecture.rst      | 431 +++++++++
>  Documentation/x86/sgx/2.Kernel-internals.rst  |  56 ++
>  Documentation/x86/sgx/3.API.rst               |  27 +
>  Documentation/x86/sgx/index.rst               |  18 +
>  MAINTAINERS                                   |  12 +
>  arch/x86/Kconfig                              |  27 +
>  arch/x86/entry/vdso/Makefile                  |   6 +-
>  arch/x86/entry/vdso/extable.c                 |  37 +
>  arch/x86/entry/vdso/extable.h                 |  29 +
>  arch/x86/entry/vdso/vdso-layout.lds.S         |   9 +-
>  arch/x86/entry/vdso/vdso.lds.S                |   1 +
>  arch/x86/entry/vdso/vdso2c.h                  |  58 +-
>  arch/x86/entry/vdso/vsgx_enter_enclave.S      | 101 +++
>  arch/x86/include/asm/cpufeatures.h            |  24 +-
>  arch/x86/include/asm/disabled-features.h      |  14 +-
>  arch/x86/include/asm/msr-index.h              |   8 +
>  arch/x86/include/asm/traps.h                  |   1 +
>  arch/x86/include/asm/vdso.h                   |   5 +
>  arch/x86/include/uapi/asm/sgx.h               |  86 ++
>  arch/x86/include/uapi/asm/sgx_errno.h         |  91 ++
>  arch/x86/kernel/cpu/Makefile                  |   1 +
>  arch/x86/kernel/cpu/intel.c                   |  39 +
>  arch/x86/kernel/cpu/scattered.c               |   2 +
>  arch/x86/kernel/cpu/sgx/Makefile              |   2 +
>  arch/x86/kernel/cpu/sgx/arch.h                | 424 +++++++++
>  arch/x86/kernel/cpu/sgx/driver/Makefile       |   3 +
>  arch/x86/kernel/cpu/sgx/driver/driver.h       |  38 +
>  arch/x86/kernel/cpu/sgx/driver/ioctl.c        | 850 ++++++++++++++++++
>  arch/x86/kernel/cpu/sgx/driver/main.c         | 368 ++++++++
>  arch/x86/kernel/cpu/sgx/encl.c                | 709 +++++++++++++++
>  arch/x86/kernel/cpu/sgx/encl.h                | 136 +++
>  arch/x86/kernel/cpu/sgx/encls.c               |  22 +
>  arch/x86/kernel/cpu/sgx/encls.h               | 244 +++++
>  arch/x86/kernel/cpu/sgx/main.c                | 360 ++++++++
>  arch/x86/kernel/cpu/sgx/reclaim.c             | 482 ++++++++++
>  arch/x86/kernel/cpu/sgx/sgx.h                 |  90 ++
>  arch/x86/kernel/traps.c                       |  14 +
>  arch/x86/mm/fault.c                           |  44 +-
>  tools/arch/x86/include/asm/cpufeatures.h      |  21 +-
>  tools/testing/selftests/x86/Makefile          |  10 +
>  tools/testing/selftests/x86/sgx/Makefile      |  48 +
>  tools/testing/selftests/x86/sgx/defines.h     |  39 +
>  tools/testing/selftests/x86/sgx/encl.c        |  20 +
>  tools/testing/selftests/x86/sgx/encl.lds      |  33 +
>  .../selftests/x86/sgx/encl_bootstrap.S        |  94 ++
>  tools/testing/selftests/x86/sgx/encl_piggy.S  |  18 +
>  tools/testing/selftests/x86/sgx/encl_piggy.h  |  14 +
>  tools/testing/selftests/x86/sgx/main.c        | 279 ++++++
>  tools/testing/selftests/x86/sgx/sgx_call.S    |  15 +
>  tools/testing/selftests/x86/sgx/sgxsign.c     | 508 +++++++++++
>  .../testing/selftests/x86/sgx/signing_key.pem |  39 +
>  54 files changed, 5987 insertions(+), 32 deletions(-)
>  create mode 100644 Documentation/x86/index.rst
>  create mode 100644 Documentation/x86/sgx/1.Architecture.rst
>  create mode 100644 Documentation/x86/sgx/2.Kernel-internals.rst
>  create mode 100644 Documentation/x86/sgx/3.API.rst
>  create mode 100644 Documentation/x86/sgx/index.rst
>  create mode 100644 arch/x86/entry/vdso/extable.c
>  create mode 100644 arch/x86/entry/vdso/extable.h
>  create mode 100644 arch/x86/entry/vdso/vsgx_enter_enclave.S
>  create mode 100644 arch/x86/include/uapi/asm/sgx.h
>  create mode 100644 arch/x86/include/uapi/asm/sgx_errno.h
>  create mode 100644 arch/x86/kernel/cpu/sgx/Makefile
>  create mode 100644 arch/x86/kernel/cpu/sgx/arch.h
>  create mode 100644 arch/x86/kernel/cpu/sgx/driver/Makefile
>  create mode 100644 arch/x86/kernel/cpu/sgx/driver/driver.h
>  create mode 100644 arch/x86/kernel/cpu/sgx/driver/ioctl.c
>  create mode 100644 arch/x86/kernel/cpu/sgx/driver/main.c
>  create mode 100644 arch/x86/kernel/cpu/sgx/encl.c
>  create mode 100644 arch/x86/kernel/cpu/sgx/encl.h
>  create mode 100644 arch/x86/kernel/cpu/sgx/encls.c
>  create mode 100644 arch/x86/kernel/cpu/sgx/encls.h
>  create mode 100644 arch/x86/kernel/cpu/sgx/main.c
>  create mode 100644 arch/x86/kernel/cpu/sgx/reclaim.c
>  create mode 100644 arch/x86/kernel/cpu/sgx/sgx.h
>  create mode 100644 tools/testing/selftests/x86/sgx/Makefile
>  create mode 100644 tools/testing/selftests/x86/sgx/defines.h
>  create mode 100644 tools/testing/selftests/x86/sgx/encl.c
>  create mode 100644 tools/testing/selftests/x86/sgx/encl.lds
>  create mode 100644 tools/testing/selftests/x86/sgx/encl_bootstrap.S
>  create mode 100644 tools/testing/selftests/x86/sgx/encl_piggy.S
>  create mode 100644 tools/testing/selftests/x86/sgx/encl_piggy.h
>  create mode 100644 tools/testing/selftests/x86/sgx/main.c
>  create mode 100644 tools/testing/selftests/x86/sgx/sgx_call.S
>  create mode 100644 tools/testing/selftests/x86/sgx/sgxsign.c
>  create mode 100644 tools/testing/selftests/x86/sgx/signing_key.pem
> 
> -- 
> 2.19.1
> 

I'm on leave for this week and next week's Monday if you wonder why I'm
so passive in the discussion. Looking at the things next week's Tue.

Just a quick comment about Andy's proposal. Probably pretty DSO like
ELF blob could work with an addition of a section called ".tcs" for
entry points. They need to be recognized so that the loader can add
them as TCS pages.

My self-test already is a PoC for enclave binary with a custom linker
script to define the binary format. Too simplistic for a "generic"
case but still a starting point.

/Jarkko

Powered by blists - more mailing lists